Abstract

본 연구에서는 고립파를 저감시키기 위한 저감공으로 본문 중에서 제시하는 공진장치를 직선배치된 기존의 방파제와 직사각형항만의 입구부에 각각 부착하고, 이에 따른 고립파의 제어능을 검토하기 위해 3차원수리모형 실험 및 3차원수치해석을 수행하였다. 수치해석에서는 3차원수치파동수조를 이용하는 3차원혼상류해석법의 TWOPM-3D를 적용하였고, 얻어진 수치해석결과와 수리실험결과를 비교 분석하여 본 수치해석법의 타당성을 검증하였다. 또한, 공진장치가 부착되지 않은 경우와 대비 고찰하여 고립파의 제어에 대한 공진장치의 제어능을 다각도로 검토한 결과, 그의 유효성을 충분히 확인할 수 있었다. In this study, 3-dimensional hydraulic model experiment and 3-dimensional numerical analysis were carried out to review the control performance on the solitary waves by attaching the resonator suggested in this study to the openings of the existing rectangular harbors and breakwaters placed in a straight line. In the numerical analysis, TWOPM-3D of 3-D one-field Model for immiscible TWO-Phase flows method using 3-dimensional numerical wave tank was applied, and the validity of the numerical analysis method was verified through comparative analysis between hydraulic experimental results and numerical analysis results. In addition, the effectiveness of the resonator was identified as a result of review on the control performance to control solitary waves of the resonance devices through comparison with cases where the resonators are attached or not.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call