РЕЗУЛЬТАТЫ ИССЛЕДОВАНИЙ УСОВЕРШЕНСТВОВАННОЙ ГИДРОСТРУЙНОЙ НАСОСНОЙ УСТАНОВКИ

Abstract

The scientific article is aimed at substantiating the classification of hydraulic jet pumping units, developing an experimental model of an improved hydraulic jet pumping unit, conducting experimental studies - determining the useful flow Qгн depending on the flow rate of the centrifugal pump used Qн for two variants of the pumping unit operating according to the traditional and alternative technology of water lifting, determination of the head losses hснi and friction coefficients ξснi in jet pumps, increasing the ejection coefficient Ke from the swirl parameter S of water supply to the intake chamber of the jet pump and laboratory tests of the hydraulic jet pumping unit for agricultural water supply and irrigation of pastures. The results of experimental studies and laboratory tests of an experimental model of an improved water-jet pumping unit, developed at NAO KazNAU, are presented. An analysis is given of the results of comparative tests of a hydraulic jet pumping unit for two variants of the technological process: an alternative and a traditional one with an increase in the effective supply of an alternative option by 2-4 times, a decrease in the required pressure by 1.5-2 times and an increase in efficiency by 1.1-2 times. The aim of the study is to obtain results to substantiate the classification of hydraulic jet pumping units, to carry out experimental studies and laboratory tests of an improved hydraulic jet pumping unit operating according to an alternative water lifting technology, which allows to reduce the required head of the pumping unit, increase the useful flow and increase the efficiency of the improved hydraulic jet pumping unit. The work used patent research with a review of works that were carried out according to existing methods: identifying close analogues, analyzing existing works and using them in development. Experimental studies were carried out to study the technological process of water rise from wells, the processes occurring in the used jet pumps - determining the useful flow depending on the flow of a centrifugal pump, determining the pressure losses and friction coefficients in jet pumps, the ejection coefficient and checking the reliability of the theoretical assumptions obtained. Based on the analysis of the work performed and patent research on technologies for lifting water from underground water sources by hydraulic jet pumping units and designs developed for them, a substantiated classification of hydraulic jet pumping units is proposed, which allows, depending on the task at hand, to correctly choose the necessary structural and technological scheme, type of jet pump and its implementation in the development of the required effective standard sizes of the hydraulic jet pumping unit. The scheme of the test bench and the experimental model of the improved hydraulic jet pumping unit with measuring equipment and instruments for conducting experimental research and laboratory tests on a bench well is presented.