Abstract

건물설계단계에서 신축예정건물의 열차진동영향평가를 위하여 국내의 4개의 열차진동 가속도응답 계측치와 진동전달율(Transmissibility)값을 이용한 이론치를 비교하여 TR값의 적용성을 제시하였다. 이 TR 방법을 통하여 철도인접지역 위치한 신축 예정지반을 선정하고 지반진동 계측을 실시하였다. 계측한 지반의 가진진동수와 수직가속도응답과 신축 예정건물의 바닥슬래브를 MIDAS로 해석한 고유진동수를 통해 진동전달률을 산정한 후 신축건물의 진통예측을 실시하였다. TR을 적용한 가속도응답 예측치를 열차진동 가속도응답 계측치와 비교한 결과 3.61%~37.1% 오차범위에서 있는 것을 확인하였다. 또한 KTX, 경의선, 시멘트 열차 주행 시 지반의 가진진동수는 7.19~10.61Hz 사이에 선명한 피크를 확인 할 수 있다. For train vibration influence assessment of newly constructed buildings in building design levels, 4 train measured vibration acceleration responses were used to compare with TR theory values and suitability of TR values was proposed. Through this TR method, construction planned grounds located near railroad areas were selected and ground vibration measurement was conducted. Through natural frequency by MIDAS, vertical acceleration response, and ground frequency from measured vibration response, TR was calculated and vibration prediction was conducted. As a result of comparing acceleration response estimate applying TR and measured value of train vibration acceleration response, it was found that it was in 3.61%~37.1% of margin of error. Clear peak of 7.19~10.61Hz in KTX, Gyungeuisun, and cement train were confirmed.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.