Abstract

본 논문에서는 전기적으로 크기가 큰 능동 위상 배열 안테나에서 발생하는 빔-편이(beam-squint)현상을 해결할 수 있는 시간 지연기를 설계 및 제작하고, 측정 결과를 고찰한다. 시간 지연기는 4-bit 스위치로 제어되는 마이크로스트립 라인으로 설계되었으며, 시간 지연 구조의 손실을 보상해 주기 위해 송수신 경로에 MMIC 증폭기 모듈을 추가하였다. 시간 지연기의 측정을 통해 지연 상태별 이득 및 위상, P1dB, 수신 잡음 지수 등의 전기적 성능 규격을 만족함을 확인하였다. 또한, 제작된 시간 지연기의 성능 검증을 위해 측정 결과를 광대역 능동위상 배열 안테나에 적용하여 빔 패턴 보정 효과를 확인하였다. X 밴드 대역에서 800 MHz 대역차를 갖는 675.8 mm 크기의 안테나에 대해 빔 편이 현상을 보정해 본 결과 <TEX>${\pm}0.1^{\circ}$</TEX>이던 주파수에 따른 조향각 오차가 <TEX>${\pm}0.1^{\circ}$</TEX> 이내로 줄어드는 효과를 확인하였으며, 향후 광대역 능동 위상 배열 안테나 시스템에 적용 가능성을 확인하였다. In this paper, we have designed TDL(True-time Delay Line) for eliminating beam-squint occurring in active phased array antenna with large electrical size operated in wide bandwidth, and have tested its electrical performance. The proposed TDL device is composed of 4-bit microstrip delay line structure and MMIC amplifier for compensation of the delay-line loss. The measured results of gain and phase versus delay state satisfy the electrical requirements, also P1dB output power and noise figure meet the requirement. To verify the performance of fabricated TDL, we have simulated the beam patterns of wide-band active phased array antenna using the measured results and have certified the beam pattern compensation performance. As a result of simulated beam pattern compensation with respect to the 675.8 mm size antenna which is operated in X-band, 800 MHz bandwidth, we have reduced the beam squint error of <TEX>${\pm}1^{\circ}$</TEX> with <TEX>${\pm}0.1^{\circ}$</TEX>. So this TDL module is able to be applied to active phase array antenna system.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call