ОСОБЛИВОСТІ ЗАБЕЗПЕЧЕННЯ АЕРОДИНАМІЧНИХ ХАРАКТЕРИСТИК РЕГІОНАЛЬНОГО ПАСАЖИРСЬКОГО ЛІТАКА

Abstract

Principal results of the computational and research work performed during development of a regional passenger aircraft to ensure its aerodynamic characteristics are given. When creating the An-148-100/An-158 family of aircraft, such level of the aircraft aerodynamic perfection was achieved, which ensured fulfillment of the specified requirements for their flight performance – maximum speed, cruising flight altitude and flight range with different payloads. The developed aerodynamic configuration made it possible to create a family of regional passenger high-wing planes with a flight speed of up to 870 km/h (true speed) (M = 0.8), which have no analogues in the world aviation industry. Developed for the An-148-100 / An- 158 aircraft, supercritical profiles of the new generation with a large maximum relative thickness formed the basis of the aerodynamic configuration of a high-speed wing with moderate sweep. The aircraft lift-to-drag ratio in cruise flight is Kcruise = 15.8, which corresponds to the worldwide values. Developed aerodynamic configuration of the wing high-lift devices provides high bearing properties of the wing during take-off and landing stages, which allows to fully meet the requirements for the runway required length of the base airfields Lrun = 1485...1950 m. Developed algorithms are implemented in the electric remote control system and provide necessary standard characteristics of stability, controllability and flight dynamics in the main control mode. Selected margins of the aircraft’s own static stability and effectiveness of its controls ensure safe completion of the flight in standby control mode. The certification flight tests of the An-148-100/An-158 airplanes confirmed full compliance of their take-off and landing performance, as well as the stability, controllability and flight dynamics characteristics with the requirements of the Certification basis in both standard and in failure situations tested in flight tests. Necessary and sufficient amount of experimental work was conducted in the lowspeed and high-speed wind tunnels of the ANTONOV SC and TsAGI to verify the aerodynamic and spin characteristics of the An-148-100/An-158 airplane models, which improved the aerodynamic configuration of the aircraft and its individual units and allowed to apply the work results in calculation of aircraft strength, as well as for development of their systems.