Abstract
AbstractWe have constructed a spheroidal model to solve the problem of light scattering by nonspherical particles. The semiaxes of the model spheroid are determined based on the requirement that the volumes of initial and model particles are equal, as well as the ratios of their longitudinal and transverse dimensions. This ensures the closeness of the optical properties of initial and model particles. This approach has been applied to prolate and oblate parallelepipeds, cylinders, and cones with the ratios between their larger and smaller dimensions equal to 2 or 10. The direction of propagation of the incident TE or TM plane wave was either parallel or perpendicular to the symmetry axis of particles and model spheroid. The particle size has been determined by dimensionless parameter $${{x}_{{v}}}$$ = $$2\pi {{r}_{{v}}}$$ /λ, which depends on the particle volume, since $${{r}_{{v}}}$$ is the radius of the equivolume sphere. In calculations, this parameter has been varied from small values to fairly large ones, $${{x}_{{v}}}$$ = 10. The applicability range of the model has been determined by comparing the results of numerical calculations performed by the rigorous separation of variables method for spheroids and the method of discrete dipoles for other nonspherical particles. It has been shown that the applicability range of the model for parallelepipeds, cylinders, and cones is wide enough for different parameters of the problem, in particular, if the parameter $${{x}_{{v}}}$$ ≤ 6, then the relative error of the model does not exceed 10–15%. To a large extent, this is related to the fact that the first maximum of the dependence of scattering factor Q _sca on $${{x}_{{v}}}$$ is similar for particles of different shapes approximated by one and the same model spheroid.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have