Abstract
today, up to 80% of buildings and structures are built on deep foundations, the main elements of which are concrete and reinforced concrete piles (hammered, bored and piles made according to CFA technology). Since the beginning of the mass use of drilling piles (the 60s of the last century), there is still a problem of ensuring the reliability of foundations, due to the fact that the process of installing piles is hidden from observation, and unacceptable defects may form in the pile trunks, which reduce the bearing capacity of piles and can lead the structure to an emergency condition. Pile construction technologies are constantly being improved, however, it is still not possible to avoid the appearance of defects in pile trunks because there are quite a lot of reasons for the formation of defects that it is not always possible to foresee and take into account. That is why, during the construction of deep foundations, output monitoring of the technical condition of drill pile shafts should be provided, which cannot be performed without the use of non-destructive diagnostic methods. The use of these methods and means, which implements them, should be mandatory to ensure the reliability and safety of the operation of buildings and structures and today is already provided for by numerous standards and regulatory documents. Currently, acoustic methods are mainly used for diagnostics, namely: single- and multi-channel acoustic logging; pulse Echo method with shock excitation of elastic waves (hereinafter referred to as the method of vibration-shock diagnostics). It should be noted that in the case of using high deformation to excite elastic waves, at which the impact energy on the end of the pile reaches the limit of proportionality, an assessment of the bearing capacity of experimental piles is given, and the low technique is used exclusively for diagnosing pile trunks. For a long time, these methods could not be widely implemented in the field. Their capabilities have increased significantly after the development of digital signal processing methods
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.