Abstract
scientific and technological bases of receiving vitreous coverings on wood with use of a torch of low-temperature plasma are developed. Before plasma dusting of glass powders by grain structure 60-120mkm, the special protective coating protecting chipboard from destruction at high-temperature influence of a plasma stream on a front surface of the wood particle board (WPB) was applied. The structure of an intermediate protective coating including mix of a fine-grained glass powder and liquid glass is developed. Preliminary drawing an intermediate protective layer provides several consecutive technological operations.
 For receiving vitreous coverings fight of colored and colourless glass are used which was previously ground in spherical porcelain mills. Optimum process parameters of plasma dusting of glass powder on the front surface of chipboard are developed. Optimum parameters of plasma melting is: current - 800A; operating voltage – 30B, a consumption of plasma-forming gas of argon 2m3/h.
 Operational and aesthetic-consumer properties of vitreous protective and decorative coverings are investigated. It is established that vitreous protective and decorative coverings have the high durability of coupling with an intermediate protective layer. The received vitreous protective and decorative coverings on the basis of colored and colourless glass have the high water resistance, acid resistance, alkali resistance, as well as microhardness and high aesthetic performance.
 The technology is recommended for widespread industrial introduction.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
