Abstract
The article considers three methods of increasing the distribution uniformity of properties over the filtration area of powder filter materials at different stages of their manufacturing. It is shown that granulation of metal powders with a pore former increases the uniformity of permeability distribution over the filtration area by a factor of 2.3–3.5. Dry radial isostatic pressing ensures high distribution uniformity of properties, while the coefficient of variation of local permeability does not exceed 0.17. Radial compression allows increasing the uniformity of permeability distribution over the filtration area by 15 ... 22 % compared to that for the original powder filter materials. The selection of the method used in practice is determined by the shape, size and properties of the manufactured products and initial powders. The considered methods can be used in petrochemical engineering for the manufacture of porous powder products for filtering purposes, used to trap catalyst particles, filters for fine and coarse fuel and oil purification.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of Higher Educational Institutions. Маchine Building
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
