Abstract
Sidelobe canceller(SLC) requires main beam pattern(SUM beam) and auxiliary beam patterns for rejection of sidelobe noise jammer. For best performance of sidelobe noise jamming cancellation of adaptive SLC, gain dominant region of each auxiliary beam pattern shall not be overlapped one another in elevation/azimuth regions of sidelobe of main beam, and beam patterns of auxiliary channels should have low gains in regions of mainlobe of main beam. In the monopulse radar, the difference beam patterns for monopulse processing have these properties. This paper proposes the method using data from the difference channel for monopulse processing as data from auxiliary channel for sidelobe cancellation. For the proposed SLC, the results of simulation and performance analysis was presented. If the proposed method is used in the monopulse radar, SLC can be constructed by using basic SUM and difference channels without extra channel composition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have