Особенности моделирования воздушных и кабельных участков линий электропередачи 110–750 кВ при использовании фазного координатного базиса

Abstract

Power system steady state and transient analysis require correct modeling of overhead transmission lines and cables operating at 110–750 kV. The key difficulties to model sections of overhead and cable lines are caused by complex conductor geometry, their transposition, as well as grounding schemes of ground wires of overhead lines and screens of underground cables. The paper covers various aspects of 110–750 overhead line and cable modeling that must be taken into consideration to obtain a reliable mathematical model in a phase domain. Modern software does not provide a universal solution to determine line parameters. The 110–500 kV cable line modeling issues have not been worked out properly and require careful analysis of specialized foreign literature. Thus, the task to develop the algorithms of calculating the parameters of overhead and cable power lines is relevant, taking into account the various configuration options of these lines which are possible in operational practice. To derive overhead transmission line and cable line models, electric circuit theory and matrix algebra methods have been used. The ATP/ATPDraw and MATLAB/Simulink software environment has been used to investigate what tools are available to determine line parameters, as well as to verify some of the calculation results. Analysis has been carried out to reveal the options available in the ATP/ATPDraw and MATLAB/Simulink software to compute line parameters in a phase domain. An algorithm has been developed and verified to calculate overhead line parameters regardless of the number of parallel circuits. The key features of the calculation of the matrix of linear resistances of overhead power transmission lines are outlined. The main features of modern cable lines operating at 110–500 kV are also described. The paper presents various cable layouts possible in real-field conditions, as well as provides expressions that allow obtaining correct impedances and admittances for a system of cable line conductors. Study of the options of various software tools dedicated to overhead line parameter calculation in a phase domain has revealed that these tools cannot be deemed universal to represent an overhead line of whatever configuration. However, the developed algorithm is universal as it allows computing line parameters regardless the ground wire grounding approach. The expressions presented in this paper consider various layouts of 110–500 kV cable lines that could be encountered in the Russian power system.