Abstract
Abstract. The results of studies on the grinding of waste wet magnetic separation of ferruginous quartz-ites of the Lebedinsky mining and processing plant in a centrifugal grinding unit are given, their grinding features are established. Binder compositions are obtained at different ratios of cement and wet magnetic separation waste in a centrifugal grinding mill at different grinding modes. The features of grinding process-es are studied, the technological and physicomechanical properties of the obtained binding compositions are determined. The data obtained indicate that the use of mineral filler up to 10% provides compaction of the structure due to the presence of fine mineral filler, which will reduce the consumption of Portland cement to 10%. During mechanical activation of the compositions of binding compositions, a sharp increase in the con-centration of surface defects occurs, due to the violation of contacts between crystals with the rupture of sili-con-oxygen valence bonds. The activity of the wet magnetic separation waste of ferruginous quartzites is ap-parently due to the presence of a large number of exchange centers on their surface, a significant part of which are Bronsted acids and bases. The processes of hydration and the formation of cement with the use of binders requires further detailed study.
Highlights
Binder compositions are obtained at different ratios of cement and wet magnetic separation waste in a centrifugal grinding mill at different grinding modes
The data obtained indicate that the use of mineral filler up to 10% provides compaction of the structure due to the presence of fine mineral filler, which will reduce the consumption of Portland cement to 10%
Полученные результаты исследований по измельчению отходов мокрой магнитной сепарации железистых кварцитов (ММС) Лебединского горно-обогатительного комбината в центробежном помольном агрегате показали, что данный помольный агрегат обеспечивает высокую размолоспособность зернам вяжущей композиции, состоящей из портландцемента и твердой минеральной составляющей, представленной отходами ММС
Summary
Приведены результаты исследований по измельчению отходов мокрой магнитной сепарации железистых кварцитов (ММС) Лебединского горно-обогатительного комбината в центробежном помольном агрегате, определена специфика их измельчения. Разработаны вяжущие композиции с разным процентным содержанием портландцемента и отходов мокрой магнитной сепарации в центробежном помольном аппарате. Ключевые слова: вяжущие композиции, центробежный помольный агрегат, отходы мокрой магнитной сепарации, гранулометрический состав, физико-механические показатели.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have