Abstract
In this study, an algorithm for control of SPD(Suspended Particles Display) on Smart Skin was proposed. The office with SPD located in Jeonju, Jeollabuk-do was modeled and simulated using TRNSYS18. Through simulation, the energy and lighting consumption of building were analyzed The two kinds of control algorithm(SPD and dimming control method for cool energy and lighting energy saving(CASE 1) and improved control method(CASE 2)) were compared. For this research, Two models(with and without SPD and dimming control) were analyzed by comparing the cooling energy and the light energy consumption was reduced 15.1%, and the lightind energy consumption was reduced by 39.2% more than the model without SPD and dimming control. But, at the improved control method(CASE 2) the cooling energy consumption was reduced of more 2.5% and lighting energy consumptions was reduced of more 18.3% than CASE 1. When using SPD and dimming control, lighting energy consumptions showed more sensitive to solar radiation than cooling energy consumptions. As the improved control method(CASE 2) showed more advantageous saving tate than SPD and dimming control metrhod for cool energy and lighting energy saving(CASE 1), it was found that the improved control method (CASE 2) must be utilized in practice for SPD and dimming control.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Korean Society of Mechanical Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
