Abstract
The paper considers issues of verifying software systems on the example of a prismatic beam. Verification refers to checking the software system results compliance with requirements and constraints. Verification was carried out on a test example, which was selected as calculation of displacements of a statically determined beam with one rigid attachment under the action of a transverse load. Analytical calculation of the statically determined prismatic beam displacement was performed, and its bending curve was obtained. The bending curve shape was found by integrating the beam elastic line differential equation. Maximum displacement at the beam edge was calculated. Results of the analytical method verification calculations were compared with data obtained using different software systems, where the problem was solved by the finite element method. Advantages and disadvantages of the ANSYS and SolidWorks software systems were indicated. The obtained results testify to accuracy of the performed engineering calculations.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
