Abstract
One of the main factors in the poultry house is maintaining a standardized microclimate. The quality of the product output in the final result depends precisely on the quality indicators of the air parameters. Poultry during its maintenance requires significant efforts and technological solutions. In this regard, authors improved microclimate system in air environment of the poultry house by installing exhaust fans on the side wall in a total number of 8 units. CFD modeling using ANSYS Fluent is a powerful tool for predicting the air flow scheme in a poultry house and is considered an alternative to experimental studies. Based on the obtained results of CFD modeling, it was established that the valves located at a height of 330 mm from the ceiling work most efficiently. Pressure drop for the inlet valves is 45.85 Pa. Air velocity at the inlet of the supply valves is equal to 9.17 m/s. Air velocity at a height of 0.7 m from the floor level varies within 0.57 m/s, the temperature is 9.91 °С.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
