Розробка блок-схем установки замкнутого водопостачання для виробництва продукції аквакультури

Abstract

The production of aquaculture products in closed water supply plants is becoming more widespread, and the volume of cultivation with such systems of freshwater fish is increasing. The use of closed water supply plants is the most promising global trend. When growing in closed water supply facilities, all parameters of the technological process are supported by automated devices, and the influence of natural factors on the process of the process is minimal. However, such systems require complex technological support, which needs constant improvement. When working in closed water supply plants, a precipitate is formed that needs to be recycled. It is expedient to utilize these sediments using methods that allow to receive additional heat and electricity for the needs of closed water supply plants in the production of aquaculture. On the basis of generalization and analysis of literary sources, it was found that the average value of the coefficient of conversion of mixed fodder during fattening of pigs is from 2.8 to 3.2 kg of feed per kg of weight gain. The average value of the coefficient of conversion of mixed fodder during fattening cattle is from 6.3 to 7.2 kg of feed per kg of weight gain. When growing broilers, the feed conversion rate is from 1.6 to 2 kg per kg of weight gain. The average value of the coefficient of conversion of mixed fodder during the cultivation of trout was 1.6 kg of feed per kg of weight gain, and at feeding sows – 1.2 kg of feed per kg of weight gain. The results of the development of block diagrams for the installation of closed water supply for the production of aquaculture with the provision of partial energy autonomy due to heat and electricity generated during the cogeneration of biogas generated during methane digestion of organic constituents of the sediment formed during the operation of the closed water supply system are presented