Abstract

ABSTRACT An experimental study for the characteristics of the thrust-vectoring of a sonic jet utilizing the coanda flap installed at a rectangular nozzle exit is performed. Two side plates are installed at both sides of the flap to decrease the three dimensional effects of the jet on the flap surface. Schlieren flow visualizations and quantitative measurements of the deflection angle of thrusting vector show that the side plates are able to delay the separation of the jet at the downstream of the flap surface. Substantial increase in the deflection angle of the jet as high as 72˚ and small thrust loss as low as 7% are obtained by the present thrust-vectoring technique using the side plates.초 록 사각노즐에서 발생한 음속제트의 코안다 효과를 이용한 추력편향 제어에 관한 실험적 연구가 수행되었다. 코안다 플랩 표면에서 나타나는 제트유동의 3차원 효과를 저감시키기 위하여 노즐 출구의 코안다 플랩 양쪽에 측판이 설치되었다. 쉴리렌 유동가시화 기법과 정량적인 추력편향각 측정을 통하여, 플랩 양쪽에 설치된 측판에 의하여 제트유동의 플랩 하류에서의 박리현상이 크게 지연되었음을 관찰하였다. 이에 따라 최대 72도의 높은 추력편향각과 약 7% 정도의 적은 추력손실이 관찰되었다.Key Words:Thrust Vector Control(추력편향제어), Sonic Jet(음속제트), Shock Wave(충격파), Coanda Effect(코안다 효과), Flow Separation(유동박리) Received 14 August 2015 / Revised 8 March 2016 / Accepted 15 March 2016

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.