Abstract
정상 및 비정상상태의 화재조건에서 설치가 용이하고 저가형인 판형 열유속계(PT)의 적용성에 대한 실험적 연구가 수행되었다. 열원으로서 적외선 복사 히터와 C3H8이 적용된 정사각형 버너가 사용되었다. PT의 상대적 측정 정확도는 Gardon-type 열유속 미터를 이용한 측정결과와의 비교를 통해 평가되었다. 정상 및 비정상상태의 화재조건에서 PT의 최적 크기 및 두께는 측정 정확도와 실용적 관점에서 각각 100 mm와 0.6 mm로 확인되었다. 이 결과들은 PT의 크기 및 두께의 변화에 따른 전도 열손실과 열관성에 의해 설명되었다. 또한 Slow보다 빠른 화재 성장속도의 조건에서 PT를 이용한 열유속 측정에는 상당한 주의가 요구됨을 확인하였다. The applicability of plate thermometer (PT), which feature simple installation and low cost, was experimentally examined in steady and unsteady-state fire conditions. An infrared radiation heater and a square burner with C3H8 as fuel were used as heat sources. The relative measurement accuracy of the PT was evaluated by comparing measurements made using a Gardon-type heat flux meter. From a practical point of view and in terms of measurement accuracy, the optimal size and thickness of the PT in steady and unsteady-state fire conditions were 100 mm and 0.6 mm, respectively. These results can be explained by the conductive heat losses and thermal inertia of the PT for different sizes and thicknesses. It can be also concluded that measurements of heat flux using the PT in conditions of faster fire growth rate than slow require considerable attention.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
