하지부 기구학 모델과 보행주기분석을 이용하는 관성측정센서 기반 보행위치 측정 방법

Abstract

This paper proposes a walking position tracking method using inertial measurement unit (IMU) based on kinematic model of human body and walking cycle analysis. A kinematic model of lower body consisting of 9 coordinate frames and 7 links is used to estimate walking trajectory of the body based on rotation angles of the lower body measured by IMU. In this method, the position of left or right end frame of the lower body which is in contact with the ground is first identified and set as the reference position. The position of the base frame attached on the center of pelvis is then computed using the kinematic model and the reference position. One can switch the reference position with the position of the other end frame at the moment of heel strike. The proposed position tracking method was experimentally validated. Experimental result showed that position tracking errors were within 1.4% of walking distance for straight walking and 2.2% for circular walking.