Abstract
스터럽 보강 선설치 앵커의 동적 전단하중 하의 파열파괴강도를 평가하기 위한 실험 연구를 수행하였다. 전단 하중은 ACI 355.2 및 ETAG 001에 제시된 지진모의실험 방식으로 재하하였다. 시험체는 M36 앵커(연단거리 180mm)를 D10 스터럽(간격 100mm)으로 보강하였다. 이들 시험체는 거의 극한 파열파괴 강도에 도달한 후 앵커의 파단이 발생하였다. 이에 M42 앵커(연단거리 160mm)를 D6 스터럽(간격 100mm)으로 보강한 시험체에 대한 실험을 추가로 수행하였다. 실험 결과, 동적 전단강도는 정적 강도에 비해 낮은 값을 보이지 않았다. 또한, ACI 318 및 ETAG 001 기준은 스터럽 보강이 많을수록 파열파괴강도를 안전측으로 평가하는 것으로 나타났다. An experimental study was conducted to evaluate the breakout strength of stirrup-reinforced cast-in anchors under dynamic shear loadings. The shear loadings were applied in the manner specified in the ACI 355.2 and ETAG 001 for the seismic qualification tests. Test specimens were fabricated with M36 anchor (edge distance, 180mm) reinforced with D10 stirrups (spacing, 100mm). The specimens reached almost the breakout strength and thereafter fracture of anchor occurred. Additional tests with M42 anchor (edge distance, 160mm) reinforced with D6 bars (spacing, 100mm) were also conducted. The experimental results showed that the dynamic shear strength was not less than the static resistance. Based on the test results, it was shown that ACI 318 and ETAG 001 specifications estimate the breakout strength of stirrup-reinforced anchors conservatively as more reinforcement is provided.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
