Abstract

The main components of high-energy compositions are nitramines: octogen (HMX) & hexogen (RDX). The solution to the problem of the lack of these components is possible through the use of returnable resources, which are obtained using a certain technology for the disposal of solid rocket fuel and ammunition, unsuitable for further use for its intended purpose. The purpose of this research is to develop a crystallization method for octogen extracted from solid rocket fuel and to obtain modified nitramine suitable for use in high-energy compositions (HEC). The parameters of the process of recrystallization of the extracted nitramine from an aqueous solution of dimethyl sulfoxide (DMSO) were determined in the laboratory: the dependence of the average particle size of the substance on the rotational speed of the mechanical stirrer and the cooling rate of the solution. The required crystal size of the modified nitramine is obtained in the process of crystallization with a rotational speed of a mechanical stirrer in the range of 200 – 330 rpm and a cooling rate of an aqueous solution of DMSO not higher than 2 °C / min, it was found. Addition of seed crystals of standard nitramine up to 10 % (by weight) and 0.5 % (by weight) modifier (isomethyltetrahydrophthalic anhydride) positively affects the crystalline form of the modified product with the formation of crystals of predominantly correct isometric form. The resulting modified nitramine has characteristics that satisfy the requirements for use in HЕC.

Highlights

  • Основними компонентами, що входять до складу багатьох високоенергетичних композицій є нітраміни октоген та гексоген

  • Одним з найефективніших є гідромеханічний метод, який полягає в гідродинамічному вилучені фрагментів твердого ракетного палива з подальшим його подрібненням [1]

  • Ж. прикл. химии. – 1961. – Vol 34, No5. – С. 986–993

Read more

Summary

Форму та розмір кристалів модифікованого нітраміну визначали на мікроскопі Leica

DMILM; густину вимірювали пікнометричним методом; гранулометричний склад визначали мокрим розсівом у етиловому спирті; диференційний термічний аналіз (ДТА). Процес модифікації проводився таким чином: Суміш 60 г вихідного нітраміну-сирцю, вилученого з полімерної матриці ТРП, та 180 г. Отриманий розчин фільтрують через 90 °С розчин нітраміну в ДМСО при складчастий паперовий фільтр і поміщують у перемішуванні мішалкою 5 Після охолодження отриманий розчин перемішують за даних умов ще протягом 30 хвилин та відфільтровують кристалічний осад модифікованого нітраміну через складчастий паперовий фільтр, промивають на фільтрі етиловим спиртом, сушать при кімнатній температурі до сталої маси. Результати та їх обговорення В основу процесу модифікації нітраміну, вилученого з твердого ракетного палива, покладена існуюча на ДП «НВО «ПХЗ» методика очистки та кристалізації, яка полягає в екстракції за допомогою ДМСО [24] з отриманої полімерної матриці ТРП нітраміну із подальшим відділенням екстракту від рафінованої крихти полімеру і висадженням нітраміну введенням в отриманий розчин екстракту компонента, що не розчиняє цільовий продукт – води.

Nitramine after modified
Корекцію форми кристалів нітраміну в ході його модифікації проводили шляхом
Findings
Compounds Containing Nitramine Groups Suitable as
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call