Abstract

Concrete is a fundamental material of modern construction due to its reliability, the ability to harden in air and under water, the ability to build structures of any shape and sizes. In particular, it is used in the construction of advanced structures and their parts: nuclear power plants, large hydraulic struc-tures, bridges, massive foundations of multi-storey buildings, etc. This paper is devoted to relevant objective in the field of construction of buildings and structures with a high level of responsibility, the study of thermal crack resistance of massive concrete structures, taking into account the temperature effects during the building period. The calculations are given of the thermal crack resistance of the foundation plate of the reactor department of Leningrad NPP-2 under continuous concreting with one block at full height. It is highlighted that the use of the simplest calculation model, which does not con-sider fluctuations in air temperature during the building period, leads to a significant error of the sur-face insulation thickness that is optimal from the point of view of providing the thermal crack re-sistance of a massive concrete structure.

Highlights

  • Concrete is a fundamental material of modern construction due to its reliability, the ability to harden in air and under water, the ability to build structures of any shape and sizes. It is used in the construction of advanced structures and their parts: nuclear power plants, large hydraulic structures, bridges, massive foundations of multi-storey buildings, etc

  • This paper is devoted to relevant objective in the field of construction of buildings and structures with a high level of responsibility, the study of thermal crack resistance of massive concrete structures, taking into account the temperature effects during the building period

  • The calculations are given of the thermal crack resistance of the foundation plate of the reactor department of Leningrad NPP-2 under continuous concreting with one block at full height

Read more

Summary

Температурные поля

Сравнение основных характеристик темпе- для всех расчетных моделей носит одинаковый ратурных полей, полученных для моделей, пока- характер: существенный нагрев (свыше 60 °C для зывает: плиты толщиной 2 метра) в первые несколько су-. 1. Расчеты с учетом колебаний температуры ток (трое для плиты толщиной 2 метра) и затем воздуха 3. Для всех расчетных моделей, в зависимости от высоты плиты, максимальная температура в центре массива наблюдается в один и тот же момент времени. График изменения разности температур (центр-верх) в зависимости от высоты плиты приведён на рис. 6. График изменения разности температур (центр-верх) в зависимости от высоты плиты. Термическая трещиностойкость невыполнения (дельта) зависит от времени и при Результаты расчета температурной трещи- расчете по среднемесячной температуре воздуха ностойкости показывают, что на первые сутки значительно занижен по сравнению с расчетами после укладки бетонной смеси критерий трещи- с учетом колебаний температуры воздуха 7): значеверхности для плиты толщиной 2 метра, с 1-е по ние относительных деформаций в расчетах при сутки – для плиты толщиной 1 метр, с 1-е по 7- почасовой температуре воздуха наибольшие Наглядно сопоставление моделей видно на критерия наблюдается с 1-е по 5-е сутки на по- графике изменения деформаций (рис. 7): значеверхности для плиты толщиной 2 метра, с 1-е по ние относительных деформаций в расчетах при сутки – для плиты толщиной 1 метр, с 1-е по 7- почасовой температуре воздуха наибольшие

Расчет при почасовой температуре воздуха Тчас
БИБЛИОГРАФИЧЕСКИЙ СПИСОК
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call