Abstract
Cast aluminium composite materials based on AD0 aluminium, reinforced with carbon nanotubes and aluminium oxide nanofibers are obtained. It is shown that the additives of 0.05 wt % of single wall carbon nanotubes (SWCNT) and aluminum oxide nanofibers (AONF) allow increasing ultimate tensile strength of cast metal by 15 % and 16 % respectively. Strengthening of the metal is maintained after cold deformation and annealing. Aluminum AD0 with additives SWCNT or AONF retains high strength after annealing, while aluminum without additives is significantly weakened, this allows to obtain annealed aluminum wire, with a strength limit of 54 – 69 % and yield strength of 53 – 78 % higher than that of metal without additives. The influence of SWCNT and AONF on the size of aluminum grain AD0 in the cast state, after cold deformation and annealing has been studied. Nano-additives have been found to inhibit the growth of metal grains at the stage of collective recrystallization, as well as to influence the process of primary recrystallization of aluminum.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
