Abstract

본 논문에서는 전기 결합 구조와 추가된 개방 스터브를 이용해 제이 가능한 4개의 전송 영점을 갖는 저역 통과 필터를 설계 및 제작하였다. 필터의 통과 대역은 GSM 대역이며, 전기 결합에 의해 WiBro 및 위성 DMB 대역에서 전송 영점이 각각 발생한다. 또한, 임의의 상측 주파수에서 개방 스터브에 의해 추가적인 2개의 전송 영점이 발생하는 구조이다. 적은 기생 성분을 갖는 준집중 소자를 이용해 필터를 구현함으로써 차단 대역의 고조파 성분을 억제하였다. 유한 전송 영점의 제어를 위한 등가 회로의 전기 결합 성분인 <TEX>$C_M$</TEX>은 필터 구조의 개방 스터브 간 간격 조절을 통해 구현하였다. 유전율 2.6인 테프론 기판을 사용하여 제작된 필터의 전체 크기는 급전선로를 포함하여 <TEX>$38{\times}20{\times}0.79mm^3$</TEX>이다. 측정된 3dB 차단 주파수는 1.55GHz이며, 전송 영점의 위치는 각각 2.20, 2.43, 4.11 및 6.84 GHz이다. In this paper, design and fabrication of the LPF with controllable four transmission zeros using electric coupling and added open stub is presented. Pass-band of the LPF is GSM band, and two transmission zeros are generated by the electric coupling at the WiBro and S-DMB band, And the other two transmission zeros are generated by the open stub at the upper frequencies. Harmonic frequency of the stop-band is suppressed by the realization of the filter using quasi-lumped element with small parasitic values. <TEX>$C_M$</TEX>, which is the electric coupling element of the equivalent circuit, is realized by the distance control between the open stubs of the filter structure. The fabricated LPF used teflon substrate with relative permittivity of 2.6. And it has a size of <TEX>$38{\times}20{\times}0.79 mm^3$</TEX>, which is including a feed line. The measured 3 dB cut-off frequency is 1.55 GHz, and locations of the transmission zeros are 2.20, 2.43, 4.11 and 6.84 GHz, respectively.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.