К вопросу использования алюминиевых электродов для контроля защищенности от коррозии стальных корпусов судов и кораблей

Abstract

The article highlights the test results of a non-standard reference electrode made of a stripped of insulation strand of aluminum wiring, which were conducted on board an auxiliary marine vessel PM-15. The potential of the ship’s hull was measured at the same control point using three reference electrodes: silver chloride electrode No. 1; aluminum electrode No. 2; aluminum electrode No. 3. The vessel’s hull potential was measured over five days. All three reference electrodes were used daily. With the help of each electrode, fifty parallel measurements of the potential of the ship’s hull were carried out with a time interval between measurements of 5 seconds. To assess the accuracy of the measurement results, they were processed statistically. The factors that must be taken into account in the development of technologies for manufacturing non-standard reference electrodes are listed: using available inexpensive materials; avoiding expensive equipment in manufacturing the reference electrode; eliminating complex methods of storage of reference electrodes on ships. There has been given a diagram of measuring electrical circuits including the steel hull, a bulwark, a multimeter, a clamping device, switches, a silver chloride reference electrode, aluminum wires, etc. The results of the study can be used on sea-going vessels to organize the control of the protective effect of the hulls of ships and vessels in the absence of standard reference electrodes.