Abstract
In the present study, non-contact techniques for estimating the deformation of a sheet specimen of aluminium alloy AA5051 (AMg2) subjected to Erichsen cupping test are considered. It is shown that it is possible to get reliable information by numerical simulation, however, for the case when the coefficients of the yield and fracture equations of the material are well-known and validated. This requires the application of confirmatory techniques based on the results of real experiments, for example, through optical 3D-scanning. The realization of the techniques requires preparing the blank prior the experimental stage. The combined technique of speckle interferometry and digital image correlation allows estimating deformations on the outer linear surfaces, but does not indicate deformations of products with curved surfaces and inside the specimen, which requires performing an additional numerical simulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.