Анализ влияния плазменной активации на энергию поверхности волокон сверхвысокомолекулярного полиэтилена, на прочность волокон и армированных волокнами композитов

Abstract

Completely saturated chemical bonds in ultrahigh-molecular-weight polyethylene (UHMWPE) fibers — are a reason for their low surface energy (FSE), i.e. inert properties. Elongated crystal structure of UHMWPE molecules ensures high anisotropic tensile strength of the fibers. An inertness is a problem for utilization these fibers in high-strength composites production. Surface energy (SE) difference of the fibers and a binder in fiber/matrix system hinders chemical interaction at interphase boundary and worsens fiber wettability. Increase in their FSE is a topical task for this problem decision. Necessary condition of FSE increase is the integrity of molecule structure, lying under modified surface. Low temperature, nonequilibrium plasma (LTP) treatment in a medium of argon and argon/propane mixture, used in this work for plasma activation of fibers’ surface, permits to abide by this condition. However, plasma ion bombardment during a process of activation can modify interior crystal structure and, as a result, decrease their strength. The rovings SK75 (Holland) and D800 (China) were used for study of the properties of UHMWPE fibers after plasma treatment. Activation effect on FSE, strength, and fibers’ wetting by water and epoxy binder before and after ageing was studied. Capillary wetting of the fibers by distilled water used for FSE evaluation. The data of filaments surface structure and their diameter change at maximal load, obtained by optical microscope study, were used for the analysis of FSE and epoxy matrix effect on the strength of fiber/matrix systems. Essential distinction of SK75 and D800 fibers properties is ascertained. Negative effect of fibers’ and matrix’s stiffness, as well as increased FSE of stiff fibers on the strength of fiber/matrix system is revealed.