Abstract
This paper presents a comparative assessment of the tribotechnical characteristics of friction pairs with solid lubricant coatings (SLC) based on the MoS2 suspension application of VNII NP 212 and SLCCFUBMSIP deposited by the closed field unbalanced magnetron sputter ion plating (CFUBMSIP) of combined compositions MoS2+Ti, MoS2+Zr, MoS2+Cr , MoS2+W. It was established that under normal atmospheric conditions in the friction modes corresponding to the contact friction temperature of 157 °С, the life of SLCCFUBMSIP was 42.1% higher, and the coefficient of friction (ffr) was on average 2 times lower than that of SLC VNII NP 212. The average value of the life reduction coefficient for SLCCFUBMSIP during the transition from normal atmospheric conditions to water was 2.98. Under normal atmospheric conditions and in water, the SLCCFUBMSIP coefficient of friction was in the range of 0.02–0.04, and in an oil environment it ranged from 0.03 to 0.08. SLCCFUBMSIP based on pure MoS2 in normal atmospheric conditions, in water and oil was practically unusable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of Higher Educational Institutions. Маchine Building
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
