Solution Of Boundary Value Problem Research Articles

On the existence and uniqueness results for fuzzy fractional boundary value problem involving Caputo iractional derivative

In this paper, we investigate the existence and uniqueness of solutions for fuzzy boundary value problems involving fuzzy Caputo fractional derivatives of order q 2 (2, 3). As a preliminary step, we construct a generic structure of the solution associated with our proposed model by utilizing the Green’s function. We establish the existence of a unique solution of the proposed model paired with the given initial conditions by using Banach fixed point theorem. At last, as application, an illustrative example is given to show the applicability of our theoritical results.

The improved residual power series method for the solutions of higher-order linear and nonlinear boundary value problems

AbstractIRPSM is the extended form of RPSM that gives an approximate solution to boundary value problems without requiring an exact solution. This method creates a truncated series for the determination of the missing initial conditions. The present study is conducted to evaluate semi-numerical solutions to differential equations using the Improved Residual Power Series Method (IRPSM). Our main objective is to check whether the proposed scheme is efficient for solving such equations or not. The solution of differential equations has been approximated using truncated residual power series. The method is used to solve differential equations for higher-order linear and non-linear boundary value problems. Absolute errors for the solved problems are calculated to ensure accuracy. It is also compared with some known methods, like the Differential Transform Method (DTM) and the Homotopy Perturbation Method (HPM). For the calculations, Mathematica 12.0 software is used. The computed results are compared to the exact solutions as well as the available results in the literature. The results showed that the results obtained by IRPSM are closely related to the exact solution when compared to the DTM and HPM results.

Nonlocal boundary value problems for functional hybrid differential equations involving generalized w-Caputo fractional operator

In this manuscript , we establish the existence and uniqueness of solutions for boundary value problems of nonlinear hybrid fractional differential equations involving generalized $\omega-$Caputo fractional derivatives. The proofs are based on Krasnoselskii fixed point theorem and some basic concept of $\omega-$Caputo fractional analysis. As application, an nontrivial example is given in the last part of this paper to illustrate our theoretical results.

Existence of solutions for boundary value problems for first order impulsive difference equations

  In this work, we establish sufficient conditions for the existence of nonnegative solutions for a class of first order impulsive difference equations with a family of nonlinear boundary conditions. To prove our main result we use a new topological approach on the fixed point index theory for the sum of two operators in Banach spaces. An example is given to illustrate the main result.

LYAPUNOV-TYPE INEQUALITY FOR CERTAIN HALF-LINEAR LOCAL FRACTIONAL ORDINARY DIFFERENTIAL EQUATIONS

In this paper, we establish a Lyapunov-type inequality for the half-linear local fractional ordinary differential equation based on the formulation of the local fractional derivative. In addition, we apply the inequality to investigate the non-existence and uniqueness of solutions for related homogeneous and non-homogeneous local fractional boundary value problems.

Three solutions for a discrete fourth-order boundary value problem with four parameters

This paper presents several sufficient conditions for the existence of at least three classical solutions of a boundary value problem for a fourth-order difference equation. Fourth-order boundary value problems act as models for the bending or deforming of elastic beams. In different fields of research, such as computer science, mechanical engineering, control systems, artificial or biological neural networks, economics and many others,the mathematical modelling of important questions leads naturally to the consideration of nonlinear difference equations. Our technical approach is based on variational methods. An example is included in the paper.Numerical computations of the example confirm our theoretical results.

Derivative block methods for the solution for fourth-order boundary value problems of ordinary differential equations

The application of block methods in the study of dynamical system is one area which needs more research. Therefore, this work presents block methods and its application to solve some problems in solid and fluid mechanics. The method was developed directly using the approaches of collocation and interpolation, and using power series polynomial as a trial solution. First, the system of linear equations is solved to obtain the unknown coefficients. The coefficients gotten are then substituted into the approximate solution to obtain continuous scheme. The continuous scheme, its first, second and third derivatives are evaluated at all the grid points to generate the block methods. The derived methods were applied to solve fourth-order boundary value problems of ordinary differential equations arising from beams and chemical problems. The results demonstrate the reliability and efficiency of the proposed method.

CONSIDERATION OF GEOMETRIC NONLINEARITY IN MATHEMATICAL MODELING OF PROBLEMS OF THE THEORY OF SPRING

Solutions to many problems that are important for practice that arise in modern technology cannot always be obtained by traditional methods of the theory of analytical functions or by means of integral transformations. This applies, for example, to contact problems in which the finite dimensions of the region are taken into account in at least one direction, or media with curvilinear anisotropy are studied, etc. The means of the mathematical theory of elasticity are not very effective for the study of such problems. In this case, it is advisable to use the achievements of the potential theory. The use of asymptotic methods at the same time, even in complex cases, makes it possible to obtain well-founded approximate equations, clarify qualitative regularities, and obtain analytical solutions to problems. This paper presents a generalization of the perturbation method, which makes it possible to reduce the study of complex problems of geometrically nonlinear elasticity theory (in the plane and spatial formulation) to the consistent solution of simpler boundary value problems of the potential theory. The geometrically nonlinear theory of elasticity contains some features that make it different from the classical (linear) theory. The main difference is to take into account the difference between the geometry of the undeformed and deformed states of the body under study, when there are movements that cause significant changes in the geometry of the body. At the same time, the equilibrium equation must be drawn up taking into account changes in the shape and size of structures. Taking into account finite deformations, which when creating mathematical models leads to significant difficulties in solving problems, but at the same time brings the model closer to the real problem.

Impact of Two Vertical Porous Barriers in Reflection of Water Waves and Mitigation of Wave Forces on a Rigid Floating Structure with Consideration of Uniform Current Over a Porous Sea-Bed

This work examines an oblique water wave scattering by a rigid floating structure with the consideration of uniform current and no current, in the presence of two porous barriers with distinct height and porous properties placed in front of the structure. The objective is to study the associated reflection and to find means to mitigate the waveload on the floating structure. These barriers are considered at some distance apart from each other. It is assumed that the train of water waves interacts with the porous barriers and the floating structure due to which it undergoes partial reflection. The fluid domain is considered in terms of five distinct sub-regions in each of which the solution of the relevant boundary value problem in terms of the velocity potential is obtained through the employment of the techniques of separation of variables and eigenfunction expansion. The resulting system of equations is obtained by utilizing the matching conditions corresponding to the continuity of mass flux and pressure across each virtual vertical boundary. The roots of the dispersion relation are evaluated and utilized while solving the system of linear equations through a standard matrix technique which gives the unknown coefficients. For understanding the role of the porous barriers, the reflection coefficient and the hydrodynamic forces are evaluated and analyzed. In this context, the impact of the space between these two porous barriers, their height, and the values of the porous-effect parameters are thoroughly examined. It is observed that placing of these barriers at an appropriate distance from each other can substantially mitigate both horizontal force and vertical force acting on the floating structure. This study reveals a periodic nature of the reflection coefficient corresponding to an increase in the distance between the barriers. Further, another important observation is that the reflection coefficient results in an increment as the height of these porous barriers is increased. It, as a result, produces a reduction of the wave forces acting on the floating structure. The study of the oblique wave scattering by the floating structure is extended to the case of the presence of a uniform current. In this case, an enhancement in the reflection coefficient is observed, and subsequently, horizontal and vertical forces on the floating structure decrease. The impact of some other parameters on the reflection coefficient and the forces is also studied, and some observations are recorded. The results are validated against two established results which shows a very close match.

A Signed Maximum Principle for Boundary Value Problems for Riemann–Liouville Fractional Differential Equations with Analogues of Neumann or Periodic Boundary Conditions

Sufficient conditions are obtained for a signed maximum principle for boundary value problems for Riemann–Liouville fractional differential equations with analogues of Neumann or periodic boundary conditions in neighborhoods of simple eigenvalues. The primary objective is to exhibit four specific boundary value problems for which the sufficient conditions can be verified. To show an application of the signed maximum principle, a method of upper and lower solutions coupled with monotone methods is developed to obtain sufficient conditions for the existence of a maximal solution and a minimal solution of a nonlinear boundary value problem. A specific example is provided to show that sufficient conditions for the nonlinear problem can be realized.

Infinitely Many Nodal Solutions of Superlinear Third Order Two-Point Boundary Value Problems

Infinitely Many Nodal Solutions of Superlinear Third Order Two-Point Boundary Value Problems

Boundary value problems associated with Hamiltonian systems coupled with positively-(p, q)-homogeneous systems

We study the multiplicity of solutions for a two-point boundary value problem of Neumann type associated with a Hamiltonian system which couples a system with periodic Hamiltonian in the space variable with a second one with positively-(p, q)-homogeneous Hamiltonian. The periodic problem is also treated.

Fast initialization of the indirect optimization problem in the solar sail circle-to-circle orbit transfer

This Short Communication presents a procedure to approximate, in an analytical form, the solution of the optimization problem that gives the minimum-time trajectory of a low-performance solar sail, in a classical circle-to-circle heliocentric transfer. More precisely, the proposed procedure gives an accurate approximation of the solution of the two-point boundary value problem associated to the optimization process, when an indirect approach is exploited to obtain the optimal transfer trajectory and an ideal force model is used to describe the solar sail thrust vector. In particular, the analytical results illustrated in this work extend the model discussed in the recent literature, obtained with an ideal electric thruster, to the case of a flat, perfectly reflecting, solar sail-based scenario.

Stability of a Multi-Span Current-Carrying Beam Resting on Periodic Supports and Exposed to an External Magnetic Field

Abstract The stability of a current-carrying beam in an external magnetic field is studied in this paper. The beam rests on periodic supports and is modeled as an Euler–Bernoulli elastic beam. Based on the linearized stability equation and propagator transfer matrix approach for a multi-span finite-length beam, the stability equation and solutions of the several boundary value problems are obtained. While the Floquet–Bloch theory is widely used in the dynamic problem of phononic and photonic structure conditions, its application to the solution of infinite length beam static stability problem is novel. The stability values of the periodic infinite beam model are in very good agreement with one of the finite-length multi-span beams.

On one method for solving a mixed boundary value problem for a parabolic type equation using operators AT <sub>ƛ, J</sub>

A new method for obtaining a generalized solution of a mixed boundary value problem for a parabolic equation with boundary conditions of the third kind and a continuous initial condition is proposed. Generalized functions are understood in the sense of a sequential approach. The representative of the class of sequences, which is a generalized function, is obtained using the function interpolation operator, constructed using solutions of the Cauchy problem. The solution is obtained in the form of a series that converges uniformly inside the domain of the solution.

Viscous Dissipation and Mixed Convection Effects on the Induced Magnetic Field for Peristaltic Flow of a Jeffrey Nanofluid

The issue of Jeffrey nanofluid peristaltic flow in an asymmetric channel being affected by an induced magnetic field was studied. In addition, mixed convection and viscous dissipation were considered. Under the supposition of a long wave length and a low Reynolds number, the problem was made simpler. The system and corresponding boundary conditions were solved numerically by using the built-in package NDSolve in Mathematica software. This software ensures that the boundary value problem solution is accurate when the step size is set appropriately. It computes internally using the shooting method. Axial velocity, temperature distribution, nanoparticle concentration, axial induced magnetic field, and density distribution were all calculated numerically. An analysis was conducted using graphics to show how different factors affect the flow quantities of interest. The results showed that when the Jeffrey fluid parameter is increased, the magnitude of axial velocity increases at the upper wall of the channel, while it decreases close to the lower walls. Increasing the Hartmann number lads to increases in the axial velocity near the channel walls and in the concentration of nanoparticles. Additionally, as the Brownian motion parameter is increased, both temperature and nanoparticle concentration grow.

Diagnostics of Mathematical Models of Thermoelasticity. Part 1. Weak Solutions of Boundary-Value Problems and Formulation of the Problems of Diagnostics

Diagnostics of Mathematical Models of Thermoelasticity. Part 1. Weak Solutions of Boundary-Value Problems and Formulation of the Problems of Diagnostics

Research on Lateral Load Bearing Characteristics of Deepwater Drilling Conductor Suction Pile

The vast reserves of natural gas hydrates in offshore areas present significant challenges to development. Surface well construction technology is crucial for the extraction of deepwater natural gas hydrates. To ensure the safety of the subsea wellhead during the drilling process for deepwater natural gas hydrates, a novel conductor suction pile device has been designed, comprising a combination of suction piles and surface conductors. And research has been conducted to investigate the lateral stability characteristics of the conductor suction pile. Drawing upon the pile foundation load-bearing theory and the equilibrium of the differential element, a theoretical analysis model and corresponding governing equations of the conductor suction pile system are established. A solution for a multi-point boundary value problem by simplifying the conductor suction pile system into a two-end free beam is proposed. The governing equations are then converted into a first-order differential equation system, and the four-stage Lobatto IIIa collocation method program for the multi-point boundary value problem is developed and resolved using MATLAB 2023a. Furthermore, a case study of a well in the South China Sea elucidates the effects of wellhead load and seabed soil properties on the lateral load-bearing capacity of the conductor suction pile system, verifying the collocation method’s validity against the results from the finite difference method. After conducting a comparative analysis of the lateral load-bearing performance between conductor suction piles and traditional surface conductors, it is observed that conductor suction piles exhibit lower horizontal displacement and bending moments compared to surface conductors. Therefore, conductor suction piles demonstrate a substantial safety margin. The research findings provide a theoretical basis for the lateral stability of conductor suction piles during deepwater natural gas hydrate drilling. This offers a safe and efficient method for surface well construction in the extraction of natural gas hydrates.

Multiplicity of Solutions for Discrete 2n-TH Order Periodic Boundary Value Problem with φp-Laplacian

The purpose of this paper is to investigate the existence and multiplicity of nontrivial solutions with the φp-Laplacian for the discrete 2n-th order periodic boundary value issue. To support these conclusions, we have employed variational techniques and contemporary critical point theory. A few new findings are expanded upon and enhanced. We give an example to show how our key findings can be applied.

A novel Picard–Ishikawa–Green's iterative scheme for solving third‐order boundary value problems

The purpose of this paper is to introduce a novel fixed point iterative scheme based on Green's function, called the Picard–Ishikawa–Green's iterative scheme and use it in approximating the solution of boundary value problems (BVPs). It is proved that Picard–Ishikawa–Green's scheme converges strongly for an integral operator which represents the solution of BVP and the scheme is stable. Moreover, we prove that the integral operator is a contraction. Furthermore, it is shown that the novel scheme converges faster than all of Ishikawa–Green's, Khan–Green's, and Mann–Green's schemes. Finally, numerical examples are given to substantiate the validity of our results for third‐order BVPs. Our results extend and generalize several other results in literature.