Site Occupancy Research Articles

Effect of Dynamic and Preferential Decoration of Pt Catalyst Surfaces by WOx on Hydrodeoxygenation Reactions.

Catalysts containing Pt nanoparticles and reducible transition-metal oxides (WOx, NbOx, TiOx) exhibit remarkable selectivity to aromatic products in hydrodeoxygenation (HDO) reactions for biomass valorization, contrasting the undesired aromatic hydrogenation typically observed for metal catalysts. However, the active site(s) responsible for the high selectivity remains elusive. Here, theoretical and experimental analyses are combined to explain the observed HDO reactivity by interrogating the organization of reduced WOx domains on Pt surfaces at sub-monolayer coverage. The SurfGraph algorithm is used to develop model structures that capture the configurational space (∼1000 configurations) for density functional theory (DFT) calculations of a W3O7 trimer on stepped Pt surfaces. Machine-learning models trained on the DFT calculations identify the preferential occupation of well-coordinated Pt sites (≥8 Pt coordination number) by WOx and structural features governing WOx-Pt stability. WOx/Pt/SiO2 catalysts are synthesized with varying W loadings to test the theoretical predictions and relate them to HDO reactivity. Spectroscopy- and microscopy-based catalyst characterizations identify the dynamic and preferential decoration of well-coordinated sites on Pt nanoparticles by reduced WOx species, consistent with theoretical predictions. The catalytic consequences of this preferential decoration on the HDO of a lignin model compound, dihydroeugenol, are clarified. The effect of WOx decoration on Pt nanoparticles for HDO involves WOx inhibition of aromatic ring hydrogenation by preferentially blocking well-coordinated Pt sites. The identification of preferential decoration on specific sites of late-transition-metal surfaces by reducible metal oxides provides a new perspective for understanding and controlling metal-support interactions in heterogeneous catalysis.

Kenoargentotetrahedrite-(Zn), [Ag6]4+(Cu4Zn2)Sb4S12□, a new member of the tetrahedrite group from the Yindongpo Au deposit, China

Abstract. The new mineral kenoargentotetrahedrite-(Zn), [Ag6]4+(Cu4Zn2)Sb4S12□, was discovered at the Yindongpo Au deposit, Henan Province, China. It occurs as black metallic anhedral grains or equant crystals up to 40 µm in size. It is opaque in transmitted light and shows a greenish-grey colour in reflected light. Electron microprobe analysis for the studied material gave the empirical formula (on the basis of total cations being equal to 16 atoms per formula unit, apfu): M(2)(Ag3.75Cu2.25)Σ6M(1)[Cu3.90(Zn1.18Fe0.69Cd0.26)Σ2.13]Σ6.03X(3)(Sb3.69As0.27)Σ3.96S(1)S11.94 S(2)□. Kenoargentotetrahedrite-(Zn) is cubic, I4‾3m (no. 217), with a = 10.4624(4) Å, V= 1145.23(13) Å3, and Z= 2. The crystal structure has been refined to a final value of R1= 0.0247 on the basis of 274 independent reflections (Fo > 4σ (Fo)) by using single-crystal X-ray diffraction data. The seven strongest X-ray powder diffraction lines (d in Å (I) (hkl)) are the following: 3.010 (100) (222), 1.844 (30) (044), 2.606 (22) (004), 1.572 (15) (226), 2.046 (9) (134), 7.35 (6) (011), and 1.909 (5) (125). Kenoargentotetrahedrite-(Zn) is isostructural with other keno-member tetrahedrites with the [Ag6]4+ cluster. The structure refinement result confirms the coupling between the site occupancy factor of subvalent hexasilver clusters at the M(2) site and that of the vacancy at the S(2) site. This relationship further substantiates the charge balance substitution mechanism of S-deficiency tetrahedrites: 6M(2)Ag++S(2)S2-= M(2)[Ag6]4++S(2)□.

Evidence and Practical Applications of Site Occupancy Theory (SOT) of Eu3+ in Scheelite Compounds.

The determination of the site occupancy of activators in phosphors is essential for precise synthesis, understanding the relationship between their luminescence properties and crystal structure, and tailoring their properties by modifying the host composition. Herein, one simple method was proposed to help determine the sites at which the doping of rare earth ions or transition metal ions occupies in the host lattice through site occupancy theory (SOT) for ions doped into the matrix lattice. SOT was established based on the fact that doping ions preferentially occupy the sites with the lowest bonding energy deviations. In order to provide detailed experimental evidence to prove the feasibility of SOT, several scheelite-type compounds were successfully synthesized using a high-temperature solid-phase method. When Eu3+ ions occupy a similar surrounding environment site, the photoluminescence spectra of the activators Eu3+ are similar. Therefore, by comparing the intensity ratio of photoluminescence spectra and the mechanism of all transitions of KEu(WO4)2, KY(WO4)2:Eu3+, Na5Eu(WO4)4, and Na5Y(WO4)4:Eu3+, it was proved that SOT can successfully confirm the site occupation when doped ions enter the matrix lattice. SOT was further applied to the sites occupied by Eu3+ ion-doped LiAl(MoO4)2 and LiLu(MoO4)2.

Symmetry-Reduction Enhanced Polarization-Sensitive Photoresponse Based on One-Dimensional van der Waals Materials.

Designing high-performance polarization-sensitive photodetectors is essential for photonic device applications. Anisotropic one-dimensional (1D) van der Waals (vdW) materials have provided a promising platform to that end. Despite significant advances in 1D vdW photonic devices, their performance is still far from delivering practical potential. Herein, we propose the design of high-performance polarization-sensitive photodetectors using unique 1D vdW materials. By leveraging the chemical vapor transport technique, we successfully fabricate high-quality 1D vdW Nb2Pd1-xSe5 (x = 0.29) nanowires. The 1D vdW Nb2Pd1-xSe5 photodetector exhibits a high mobility of ∼56 cm2/(V s) and superior photoresponse performance, including a high responsivity of 1A/W and an ultrafast response time of ∼8 μs under 638 nm illumination. Moreover, the 1D vdW Nb2Pd1-xSe5 photodetector demonstrates excellent polarization-sensitive photoresponse with a degree of linear polarization (DOLP) up to 0.85 and can be modulated by adjusting the gate voltage, laser power density, and wavelength. Those exceptional performance are believed to be relevant to the symmetry-reduction induced by the partial occupation of Pd sites. This study offers feasible approaches to enhance the anisotropy of 1D vdW materials and the modulation of their polarization-sensitive photoresponse, which may provide deep insights into the physical origin of anisotropic properties of 1D vdW materials.

Changes of Nitrate Activity and Byproduct Distribution Characteristics for Synergistic NOx and Dioxin Abatement over V2O5/AC Catalyst.

The simultaneous removal of NOx and dioxins has been considered an economical and effective technology of controlling multipollutant flue gas in the context of "carbon peaking and carbon neutrality". However, this technology has not yet been implemented in practical situations, because the interactive relationship between the selective catalytic reduction (SCR) reaction and dioxin catalytic oxidation lacks a deep understanding, especially on a carbon-based catalyst. In this research, the influence of NO and NH3 on the oxidation characteristics and byproducts distribution of dibenzofuran (DBF) was studied on V2O5/AC catalyst. Results indicated that NH3 has a stronger inhibition effect for DBF catalytic oxidation than NO due to obvious competitive adsorption between NH3 and DBF on the V2O5/AC catalyst. In addition, although both NO and NH3 inhibit the complete degradation of DBF, their effects on the byproduct distribution are not consistent. NO primarily affects the level of oxygen-containing byproducts, while NH3 primarily affects the level of alkane byproducts. Furthermore, the SCR reaction activity demonstrated a reduction when DBF was present. The occupation of V2O5 sites by DBF and its oxidizing intermediates has hindered the production of monodentate nitrate and the reactivity of bridged nitrate, resulting in a decrease in SCR activity via the L-H mechanism. This work aims to provide theoretical guidance for simultaneous removal of NOx and dioxins in industrial fumes.

Site occupancy of native terrestrial mammals in oil palm landscapes is driven by the synergy of land sparing and sharing strategies

The conversion of tropical rainforests into industrial oil palm monocultures has detrimental effects of local biodiversity. Although some medium-sized mammals have demonstrated a degree of adaptability in oil palm landscapes, the factors that influence their ability to persist in such human-altered environments remain obscure. Here, we investigated the site occupancy and activity pattern of the mammals in oil palm landscapes in Peninsular Malaysia. We deployed 81 camera traps throughout six oil palm cultivation areas with two distinct management styles (three sites each in organized smallholdings and industrial plantations). Smallholdings had higher site occupancy of native animal species than industrial plantations. The site occupancy of the mammals was influenced by the proximity to continuous forest, forest patches and riparian vegetation. Landscape metrics are characteristics that affect land sparing strategy, allowing wildanimals in agricultural landscapes to thrive in their habitat despite human threats. At stand-level, the detection of animals was determined by elevation, undergrowth vegetation cover/height, canopy cover, oil palm height, quantity of oil palm fruits, and prune stack thickness. Mammal occupancy was higher in the smallholdings due to the proximity to continuous forest. We recommend improving landscape heterogeneity and connectivity in oil palm matrix to promote species mobility and diversifying oil palm management away from monoculture farming. Our findings indicate that incorporating land sharing and sparing strategies into the oil palm matrix is necessary to conserve biodiversity and maintain ecological services. This implies that industry stakeholders ought not to disregard either land sparing or land sharing.

Modification of Local Site Preference for Achieving Tunable Color Emission from Blue to Near-White in Sr3(PO4)2:Dy3+ Phosphor

The color tunability of Sr3(PO4)2:1%Dy3+ phosphor from blue to near white is studied at various annealing conditions. Higher temperature annealing promotes agglomerated rhombohedral (α) phase formation. Experimental and theoretical analysis reveal dopant preference at the low-symmetry Sr(II) site, altering electric (4F9/2→6H13/2) and magnetic (4F9/2→6H15/2) dipole transitions, thereby affecting the yellow-to-blue (Y/B) ratio. The luminescence intensity variation and color tunability are explained based on the local site symmetry and occupation probability of the dopant in the host lattice. An increase in the luminescence intensity up to an annealing temperature of 1200°C, followed by quenching is observed due to the oxygen vacancies. Commission Internationale d'Eclairage (CIE) color coordinates of (0.31, 0.38), Correlated Color Temperature (CCT) of 6341 K, and color purity of 22.57% confirm the potential of Sr3(PO4)2:1%Dy3+ phosphor annealed at (1200°C, 6hrs) for white light generation. A probable photoluminescence mechanism involving 4f→5d→4f transitions in Sr3(PO4)2:1%Dy3+ is proposed.

Mean-field model for BaFe[formula omitted]Ti[formula omitted]O19 ([formula omitted] = 0 and 0.2) hexaferrite: Structural and magnetic properties

An experimental and theoretical investigation of the magnetic properties of Ti-doped barium hexaferrite (BaM) is conducted. Polycrystalline samples of BaFe12−xTixO19 with x≤ 0.2 were synthesized using the solid-state reaction method. X-ray diffraction (XRD) analyses, along with Rietveld refinement, confirmed the presence of BaFe12O19 as the predominant BaM phase and a minor amount of hematite in all samples. Structural analysis revealed a slight increase in lattice parameters a and c for x=0.2. A result mostly related to the preferential occupation of Ti4+ ions at the 4f2 and 12k sites, coupled with the reduction of Fe3＋ ions to Fe2＋. It was also found that the magnetic response of samples is affected by Ti4+ substitution. Saturation magnetization slightly decreased from ∼ 45 (x = 0) to ∼ 44 emu/g (x = 0.2), the anisotropy constant from ∼4.08× 105 to ∼4.06× 105 erg/g2, while coercivity slightly increased from ∼ 2456 to ∼ 2468 Oe, and the anisotropy field from ∼ 18.2 to ∼ 18.6 kOe. The magnetic features of the samples were analyzed in terms of a proposed model based on the mean-field theory. Results indicated that the substitution of Ti4+ ions resulted in a decrease in the magnetic moment of the 2b sublattice. Such behavior is influenced by its closest neighboring sites 12k and 4f2 sublattices, which are the preferred occupancy sites for the Ti4+ cations.

Dual-Emission Origins in Bi3+-Doped M2O3 Sesquioxides (M = Sc, Y, Gd and Lu): A First-Principles Study.

Bi3+-doped sesquioxides exhibit dual emissions, marked by distinct Stokes shift and bandwidth, meaning unraveling their underlying origins is particularly intriguing. In this study, we employ first-principles calculations to investigate the luminescence mechanisms within the M2O3:Bi3+ (M = Sc, Y, Gd, Lu) series, with the goal of addressing the posed inquiry. Our investigation commences with the analysis of the site occupancy and charge state of bismuth ions in the two cationic sites through formation energy calculations. Additionally, we examine the local coordination environments for various excited states of Bi3+ dopants, including the 3P0,1 state and two types of charge transfer states, by evaluating their equilibrium geometric structures. The utilization of the hybrid functional enables us to obtain results of electronic structures and optical properties comparable with experiments. Importantly, the calculated energies for the 6s-6p transitions of Bi3+ dopants in the M2O3 series align well with the observed dual-emission energies. This alignment challenges the conventional spectroscopic sense that emission bands with large Stokes shifts can be exclusively ascribed to charge transfer transitions. Consequently, the integration of experimental and theoretical approaches emerges as the optimal strategy for designing novel Bi3+-doped phosphors.

Synthesis and crystal structure of (NH4)[Ni3(HAsO4)(AsO4)(OH)2

The title compound, ammonium trinickel(II) hydrogen arsenate arsenate di-hydroxide, was synthesized under hydro-thermal conditions. Its crystal structure is isotypic with that of K[Cu3(HAsO4)(AsO4)(OH)2] and is characterized by pseudo-hexa-gonal (001) 2 ∞[Ni3As2O18/3(OH)6/3O1/1(OH)1/1]- layers formed from vertex- and edge-sharing [NiO4(OH)2] octa-hedra and [AsO3.5(OH)0.5] tetra-hedra as the building units. The hydrogen atom of the OH group shows occupational disorder and was refined with a site occupation factor of 1/2, indicating the equal presence of [HAsO4]2- and [AsO4]3- groups. Strong asymmetric hydrogen bonds between symmetry-related (O,OH) groups of the arsenate units [O⋯O = 2.588 (18) Å] as well as hydrogen bonds accepted by these (O,OH) groups from OH groups bonded to the NiII atoms [O⋯O = 2.848 (12) Å] link adjacent layers. Additional consolidation of the packing is achieved through N-H⋯O hydrogen bonds from the ammonium ion, which is sandwiched between adjacent layers [N⋯O = 2.930 (7) Å] although the H atoms could not be located in the present study. The presence of the pseudo-hexa-gonal 2 ∞[Ni3As2O18/3(OH)6/3O1/1(OH)1/1]- layers may be the reason for the systematic threefold twinning of (NH4)[Ni3(HAsO4)(AsO4)(OH)2] crystals. Significant overlaps of the reflections of the respective twin domains complicated the structure solution and refinement.

Different states of synaptic vesicle priming explain target cell type–dependent differences in neurotransmitter release

Pronounced differences in neurotransmitter release from a given presynaptic neuron, depending on the synaptic target, are among the most intriguing features of cortical networks. Hippocampal pyramidal cells (PCs) release glutamate with low probability to somatostatin expressing oriens-lacunosum-moleculare (O-LM) interneurons (INs), and the postsynaptic responses show robust short-term facilitation, whereas the release from the same presynaptic axons onto fast-spiking INs (FSINs) is ~10-fold higher and the excitatory postsynaptic currents (EPSCs) display depression. The mechanisms underlying these vastly different synaptic behaviors have not been conclusively identified. Here, we applied a combined functional, pharmacological, and modeling approach to address whether the main difference lies in the action potential-evoked fusion or else in upstream priming processes of synaptic vesicles (SVs). A sequential two-step SV priming model was fitted to the peak amplitudes of unitary EPSCs recorded in response to complex trains of presynaptic stimuli in acute hippocampal slices of adult mice. At PC-FSIN connections, the fusion probability (Pfusion) of well-primed SVs is 0.6, and 44% of docked SVs are in a fusion-competent state. At PC-O-LM synapses, Pfusion is only 40% lower (0.36), whereas the fraction of well-primed SVs is 6.5-fold smaller. Pharmacological enhancement of fusion by 4-AP and priming by PDBU was recaptured by the model with a selective increase of Pfusion and the fraction of well-primed SVs, respectively. Our results demonstrate that the low fidelity of transmission at PC-O-LM synapses can be explained by a low occupancy of the release sites by well-primed SVs.

Can large lattice volume always facilitate ion diffusion in solids?

Large lattice volume is usually expected to expand the bottleneck size and enlarge free volume for fast Li ion transport in solids. But the universality of lattice expansion decreasing activation energy barrier for Li ion migration is still debatable. Herein, our molecular dynamics simulations and density functional theory calculations detect the unconventional phenomenon of lattice expansion increasing activation energy barrier for Li ion migration in β-Li3PS4, Li4SnS4 and Li4GeS4 sulfides with the hcp-type anion sublattice, and discover the underlying mechanism. On one hand, lattice expansion enlarges the relative energies between the octahedral and tetrahedral Li sites, and correspondingly increase activation energy barrier for tetrahedral Li ions migration along the Tet-Oct-Tet migration paths in β-Li3PS4, Li4SnS4 and Li4GeS4. On the other hand, the lattice dynamics calculations show Li energy landscapes of β-Li3PS4, Li4SnS4 and Li4GeS4 are anharmonic and enlarging lattice volume make the local minimum of Li potential energy surface flatter, simultaneously reduce the relative energy of Li occupation site, eventually resulting in the higher activation energy barrier for Li ion migration. Thus, understanding the effect of lattice volume on ion migration in solids should not only consider the factor of bottleneck size and free volume, but also combine the aspects of Li ion occupation type, Li ion migration path and anion sublattice type. These new understandings of the lattice expansion increasing activation energy barrier for ion migration would further promote the further optimization and rational design of superionic conductors by element doping or strain engineering.

The Lower Paleolithic Engravings of Bilzingsleben, Germany

Some of the earliest known engravings are described, analyzed, and interpreted, following their microscopic examination. They are of significance in exploring the cognitive evolution of hominins several hundred thousand years ago and have not been described together before. The Steinrinne site near Bilzingsleben, north of Weimar, Germany, is one of Europe’s most important Lower Paleolithic occupation sites. Its extensive human habitation floor, excavated over 1000 square meters, comprises some of the world’s oldest evidence of dwellings, broadly matching or exceeding the age of examples proposed in Africa, India, and France. It has yielded numerous hominin remains, many wooden artefacts, other exquisitely preserved organic remains, and more portable engravings than any other Middle Pleistocene site. The latter are reviewed here, presenting the results of a detailed microscopic examination of the main finds. Bilzingsleben has so far produced the largest number of engraved Lower Paleolithic objects reported, which are particularly important to exploring the cognitive developments of hominins.

Thermal stability of refined Al6(Fe, Mn) phase formed in laser powder bed fusion process

The addition of Mn in Al–Fe alloys stabilizes the Al6Fe metastable phase (orthorhombic structure, oC28) owing to the partial occupation of Fe sublattice sites by Mn atoms (formation of Al6(Fe, Mn) phase), thereby achieving superior high-temperature strength of Al–Fe–Mn ternary alloys that are manufactured via laser powder bed fusion (L-PBF) process. This study aimed to fundamentally understand the thermal stability of the refined Al6(Fe, Mn) phase formed in the L-PBF fabricated Al–2.5%Fe–2%Mn alloy in terms of a thermodynamic approach and the kinetics of morphological changes in the Al6(Fe, Mn) phase at elevated temperatures ranging from 200 to 500 ℃. The L-PBF processed samples showed a high hardness of approximately 125 HV due to the formation of numerous dispersoids of the Al6(Fe, Mn) phase with sizes of several tens of nanometers in the α-Al matrix containing concentrated solute elements of Fe and Mn. The hardness and microstructure were almost unchanged even after exposure to a high temperature of 200 ℃ for an extended period of 1000 h. Upon exposure to 300 ℃, nucleation and growth of the Al6(Fe, Mn) phase occurred locally, particularly at grain boundaries in the α-Al matrix. Such a local growth contributed to a reduction in hardness upon thermal exposure. Simultaneously, numerous nanoscale precipitates were formed in the α-Al matrix, resulting in a suppressed reduction in hardness. Contrary to the result of the thermodynamic calculations, the θ-Al13Fe4 phase was scarcely found even after long-term exposure to 500 ℃. The θ-phase formation was accompanied by the dissolution of the refined Al6Fe metastable phase for strengthening, which significantly reduced the hardness during thermal exposure. The suppressed θ-phase formation could be associated with the thermodynamically stable Al6(Fe, Mn) phase developed during the L-PBF process, which predominantly contributed to the high microstructural stability of the L-PBF fabricated Al–Fe–Mn alloy at elevated temperatures.

Site Occupancy Preference and Magnetic Properties in Nd2(Fe,Co)14B

Partial replacement of Fe by Co is an effective method to increase Curie temperature (TC), which improves the thermal stability of magnetic properties in Nd2Fe14B-based permanent magnets. The correlation between Fe substitution and magnetic properties has been studied in Nd2(Fe,Co)14B via a first-principles calculation. The calculated Fe substitution energies indicate that the Co atoms avoid the 8j2 site, which agrees with the experiments. The Co atoms are ferromagnetically coupled with Fe sublattice and show magnetic moments of about 1.2 to 1.7 μB at different crystallographic sites, less than that of Fe (2.1–2.7 μB), resulting in the decrease in total magnetization at ground state (0 K) with increasing Co content. The effective exchange interaction parameter, derived from the energy difference between varied magnetic structures, increases from 7.8 meV to 17.0 meV with increasing Co content from x = 0 to x = 14 in Nd2Fe14−xCoxB. This change in the effective exchange interaction parameter is responsible for the enhancement of TC in Nd2(Fe,Co)14B. The total magnetization at 300 K, derived from mean-field theory, shows a peak maximum value at x = 1 in Nd2Fe14−xCoxB. The phenomenon results from the interplay between the reduction of the magnetic moment in the Fe(Co) sublattice and the enhancement of TC with increasing Co content.

Manipulation of Luminescence via Surface Site Occupation in Ln3+-Doped Nanocrystals.

Ln3+-doped (Ln = lanthanide) nanocrystals are garnering strong interest for their potential as optical materials in various applications. For that reason, a thorough understanding of photophysical processes and ways to tune them in these materials is of great importance. This study, using Eu3+-doped Sr2YF7 as a well-suited model system, underscores the (not unexpected) significance of surface site occupation of Ln3+ and also challenges the prevailing views about their contribution to the luminescence of the system. High-temperature cation exchange and epitaxial shell growth allow nanocrystals to exclusively feature Eu3+ residing at the surface or in the interior, thereby separating their spectral responses. Meticulous experiments reveal that nanocrystals with high doping concentrations exhibit luminescence primarily from surface Eu3+, in contrast to the popular belief that luminescence from surface Ln3+ is largely negligible. The present study shows, on the one hand, the necessity to revise common ideas and also reveals the potential for manipulating the luminescence of such materials through an, until now, unperceived way of surface engineering.

Primary Stability of Implants Inserted into Polyurethane Blocks: Micro-CT and Analysis In Vitro.

A total of 150 implant sites were prepared in rigid polyurethane blocks to simulate two distinct bone densities of 15 pounds per cubic foot (PCF) and 30 PCF, with a 1-mm-thick simulated cortex. The implant sites were equally distributed among piezoelectric surgery (PES), traditional drills (TD), and black ruby magnetic mallet inserts (MM). Two methods have been employed to evaluate the implant's primary stability, Osstell and micro-tomography. In the present study, we observed significant variations in the implant stability quotient (ISQ) values. More precisely, our findings indicate that the ISQ values were generally higher for 30 PCF compared to 15 PCF. In terms of the preparation technique, PES exhibited the greatest ISQ values, followed by MM, and finally TD. These findings corresponded for both bone densities of 30 PCF (PES 75.6 ± 1.73, MM 69.8 ± 1.91, and TD 65.8 ± 1.91) and 15 PCF (PES 72.3 ± 1.63, MM 62.4 ± 1.77, and TD 60.6 ± 1.81). By utilizing Micro-CT scans, we were able to determine the ratio of the implant occupation to the preparation site. Furthermore, we could calculate the maximum distance between the implant and the wall of the preparation site. The findings demonstrated that PES had a higher ratio of implant to preparation site occupation, followed by TD, and then the MM, at a bone density of 30 PCF (PES 96 ± 1.95, TD 94 ± 1.88, and MM 90.3 ± 2.11). Nevertheless, there were no statistically significant differences in the occupation ratio among these three approaches in the bone density of 15 PCF (PES 89.6 ± 1.22, TD 90 ± 1.31, and MM 88.4 ± 1.17). Regarding the maximum gap between the implant and the site preparation, the smallest gaps were seen when TD were used, followed by MM, and finally by PES, either in a bone density 15 PCF (PES 318 ± 21, TD 238 ± 17, and MM 301 ± 20 μm) or in a bone density 30 PCF (PES 299 ± 20, TD 221 ± 16, and MM 281 ± 19 μm). A statistical analysis using ANOVA revealed these differences to be significant, with p-values of < 0.05. The outcomes of this study indicate that employing the PES technique and osteo-densification with MM during implant insertion may enhance the primary stability and increase the possibility of early implant loading.

Luminescence-Monitored Progressive Chemical Pressure Implementation Realized through Successive Y3+ and Mg2+ Doping into Ca10.5(PO4)7:Eu2.

Chemical pressure generated through ion doping into crystal lattices has been proven to be conducive to exploration of new matter, development of novel functionalities, and realization of unprecedented performances. However, studies are focusing on one-time doping, and there is a lack of both advanced investigations for multiple doping and sophisticated strategies to precisely and quantitatively track the gradual functionality evolution along with progressive chemical pressure implementation. Herein, high-valent Y3+ and equal-valent Mg2+ is successively doped to replace multiple Ca sites in Ca10.5(PO4)7:Eu2+. The luminescence evolution of Eu2+ serves as an optical probe, allowing step-by-step and atomic-level tracking of the site occupation of Y3+ and Mg2+, interassociation of Ca sites, and ultimately functionality improvement. The resulting Ca8MgY(PO4)7:Eu2+ displays a record-high relative sensitivity for optical thermometry. Utilization of the environment-sensitive emission of Eu2+ as a luminescent probe has offered a unique approach to monitoring structure-functionality evolution in vivo with atomic precision, which shall also be extended to optimization of other functionalities such as ferroelectricity, conductivity, thermoelectricity, and catalytic activity through precise control over atomic diffusion in other types of substances.

Ancient mitogenomes from Pre-Pottery Neolithic Central Anatolia and the effects of a Late Neolithic bottleneck in sheep (Ovis aries).

Occupied between ~10,300 and 9300 years ago, the Pre-Pottery Neolithic site of Aşıklı Höyük in Central Anatolia went through early phases of sheep domestication. Analysis of 629 mitochondrial genomes from this and numerous sites in Anatolia, southwest Asia, Europe, and Africa produced a phylogenetic tree with excessive coalescences (nodes) around the Neolithic, a potential signature of a domestication bottleneck. This is consistent with archeological evidence of sheep management at Aşıklı Höyük which transitioned from residential stabling to open pasturing over a millennium of site occupation. However, unexpectedly, we detected high genetic diversity throughout Aşıklı Höyük's occupation rather than a bottleneck. Instead, we detected a tenfold demographic bottleneck later in the Neolithic, which caused the fixation of mitochondrial haplogroup B in southwestern Anatolia. The mitochondrial genetic makeup that emerged was carried from the core region of early Neolithic sheep management into Europe and dominates the matrilineal diversity of both its ancient and the billion-strong modern sheep populations.

Luminescence of iron ions in crystals: Site occupancy, valence states, and excited-state properties

Luminescence of iron ions in crystals: Site occupancy, valence states, and excited-state properties