Single Crystal Structure Research Articles

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La3Ni2O7

AbstractRecently, superconductivity at high temperatures is observed in bulk La3Ni2O7−δ under high pressure. However, the attainment of high‐purity La3Ni2O7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La3Ni2O7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La3Ni2O7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni2+/Ni3+ in Sr‐doped La3Ni2O7, aligning them with those of “La3Ni2O7.05”, thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La3Ni2O7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La3Ni2O7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La3Ni2O7−δ, despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

Variation of (001) surface structures of strontium titanate single crystals caused by flash event under direct/alternative current electric fields

Variation of (001) surface structures of strontium titanate single crystals caused by flash event under direct/alternative current electric fields

Optofluidic crystallithography for directed growth of single-crystalline halide perovskites

Crystallization is a fundamental phenomenon which describes how the atomic building blocks such as atoms and molecules are arranged into ordered or quasi-ordered structure and form solid-state materials. While numerous studies have focused on the nucleation behavior, the precise and spatiotemporal control of growth kinetics, which dictates the defect density, the micromorphology, as well as the properties of the grown materials, remains elusive so far. Herein, we propose an optical strategy, termed optofluidic crystallithography (OCL), to solve this fundamental problem. Taking halide perovskites as an example, we use a laser beam to manipulate the molecular motion in the native precursor environment and create inhomogeneous spatial distribution of the molecular species. Harnessing the coordinated effect of laser-controlled local supersaturation and interfacial energy, we precisely steer the ionic reaction at the growth interface and directly print arbitrary single crystals of halide perovskites of high surface quality, crystallinity, and uniformity at a high printing speed of 102 μm s−1. The OCL technique can be potentially extended to the fabrication of single-crystal structures beyond halide perovskites, once crystallization can be triggered under the laser-directed local supersaturation.

Self-condensation-assisted chemical vapour deposition growth of atomically two-dimensional MOF single-crystals

Two-dimensional metal-organic frameworks (MOFs) have a wide variety of applications in molecular separation and other emerging technologies, including atomically thin electronics. However, due to the inherent fragility and strong interlayer interactions, high-quality MOF crystals of atomic thickness, especially isolated MOF crystal monolayers, have not been easy to prepare. Here, we report the self-condensation-assisted chemical vapour deposition growth of atomically thin MOF single-crystals, yielding monolayer single-crystals of poly[Fe(benzimidazole)2] up to 62 μm in grain sizes. By using transmission electron microscopy and high-resolution atomic force microscopy, high crystallinity and atomic-scale single-crystal structure are verified in the atomically MOF flakes. Moreover, integrating such MOFs with MoS2 to construct ultrathin van der Waals heterostructures is achieved by direct growth of atomically MOF single-crystals onto monolayer MoS2, and enables a highly selective ammonia sensing. These demonstrations signify the great potential of the method in facilitating the development of the fabrication and application of atomically thin MOF crystals.

Pore walls as high-way for efficient bulk charge transfer in porous SrTiO3 single crystals boosting photocatalytic overall water splitting

Suppressing carrier recombination in bulk and facilitating carrier transfer to surface via rational structure design is of great significance to improve solar-to-H2 conversion efficiency. We demonstrate a facile hydrothermal method to synthesize porous SrTiO3 single crystals (SrTiO3-P) with exposed (001) facets by introducing carbon spheres as templates. The obviously increased surface photovoltage and photocurrent response indicate that the interconnected pore walls act as enormous charge transfer “highways”, accelerating carrier transport from bulk to surface. Furthermore, the absence of grain boundaries and high crystallinity could also lower the carrier recombination rate. Thus, the SrTiO3-P photocatalyst loaded with Rh/Cr2O3 as cocatalyst exhibits 1.5 times higher overall water splitting activity than that of solid SrTiO3, with gas evolution rate of 19.99 μmol h−1 50 mg−1 for H2 and 11.37 μmol h−1 50 mg−1 for O2. Additionally, SrTiO3-P also shows superior stability without any decay during cycling testing. This work provides a new insight into designing efficient multicomponent photocatalysts with a single-crystal porous structure.

A Water-Soluble Wavy Coordination Polymer of Cu(II) as a Turn-On Luminescent Probe for Histidine and Histidine-Rich Proteins/Peptides.

Histidine plays an essential role in most biological systems. Changes in the homeostasis of histidine and histidine-rich proteins are connected to several diseases. Herein, we report a water-soluble Cu(II) coordination polymer, labeled CuCP, for the fluorimetric detection of histidine and histidine-rich proteins and peptides. Single-crystal structure determination of CuCP revealed a two-dimensional wavy network structure in which a carboxylate group connects the individual Cu(II) dimer unit in a syn-anti conformation. The weakly luminescent and water-soluble CuCP shows turn-on blue emission in the presence of histidine and histidine-rich peptides and proteins. The polymer can also stain histidine-rich proteins via gel electrophoresis. The limits of quantifications for histidine, glycine-histidine, serine-histidine, human serum albumin (HSA), bovine serum albumin, pepsin, trypsin, and lysozyme were found to be 300, 160, 600, 300, 600, 800, 120, and 290 nM, respectively. Utilizing the fluorescence turn-on property of CuCP, we measured HSA quantitatively in the urine samples. We also validated the present urinary HSA measurement assay with existing analytical techniques. Job's plot, 1H NMR, high-resolution mass spectrometry (HRMS), electron paramagnetic resonance (EPR), fluorescence, and UV-vis studies confirmed the ligand displacement from CuCP in the presence of histidine.

Preorganization Effects on Eu(III) Ion Coordination by Dipyridyl-Phenanthroline Ligands: A Combined Experimental and Theoretical Analysis.

Although 1,10-phenanthroline has been proven to hold a strong complexing capacity for f-block elements and their derivatives have been applied in many fields, research on more highly or completely rigid phenanthroline ligands is still rare due to the challenging syntheses. Here, we reported three tetradentate ligands 2,9-di(pyridin-2-yl)-1,10-phenanthroline (L1), 12-(pyridin-2-yl)-5,6-dihydroquinolino[8,7b][1,10]phenanthroline (L2), and 5,6,11,12-tetrahydrobenzo[2,1-b:3,4-b']bis([1,10]phenanthroline) (L3) with increasing preorganization on the side chain; among which, L3 is fully preorganized. Their complexation reactions with Eu(III) were systematically investigated by electrospray ionization mass spectrometry (ESI-MS), UV-vis titrations, and single-crystal structures. It is found that all three ligands form only 1:1 M/L complexes with Eu(III). The single-crystal structures revealed that the three ligands hold similar coordination modes, while their stability constants determined by UV-vis titrations were L3 (4.80 ± 0.01) > L2 (4.38 ± 0.01) > L1 (3.88 ± 0.01). This trend is supported not only by the thermodynamic stability of rigid ligands compared to free ligands but also by the conclusion that rigid ligands exhibit faster reaction rates (lower energy barrier) than free ligands kinetically. This work is helpful in providing theoretical guidance for the subsequent development of highly preorganized chelating ligands with strong coordination ability and high selectivity for f-block elements.

Single-crystal oxygen-rich bismuth oxybromide nanosheets with highly exposed defective {10–1} facets for the selective oxidation of toluene under blue LED irradiation

Reactive radicals are crucial for activating inert and low-polarity C(sp3)-H bonds for the fabrication of high value-added products. Herein, novel single-crystal oxygen-rich bismuth oxybromide nanosheets (Bi4O5Br2 SCNs) with more than 85 % {10–1} facets exposure and oxygen defects were synthesized via a facile solvothermal route. The Bi4O5Br2 SCNs demonstrated excellent photocatalytic performance in the selective oxidation of toluene under blue light. The yield of benzaldehyde was 1876.66 μmol g−1 h−1, with a selectivity of approximately 90 %. Compared to that of polycrystalline Bi4O5Br2 nanosheets (Bi4O5Br2 PCNs), the activity of Bi4O5Br2 SCNs exhibit a 21-fold increase. Experimental studies and density functional theory (DFT) calculations have demonstrated that the defect Bi4O5Br2 (10–1) facets exhibits exceptional adsorption properties for O2 molecules. In addition, the single-crystal structure in the presence of surface defects significantly increases the separation and transport of photogenerated carriers, resulting in the effective activation of adsorbed O2 into superoxide radicals (•O2–). Subsequently, the positively charged phenylmethyl H is readily linked to the negatively charged superoxide radical anion, thereby activating the CH bond. This study offers a fresh perspective and valuable insights into the development of efficient molecular oxygen-activated photocatalysts and their application in the selective catalytic conversion of aromatic C(sp3)-H bonds.

Hierarchical Self-assembly of Multidimensional Functional Materials from Sequence-defined Peptoids.

Hierarchical self-assembly represents a powerful strategy for the fabrication of functional materials across various length scales. However, achieving precise formation of functional hierarchical assemblies remains a significant challenge and requires a profound understanding of molecular assembly interactions. In this study, we present a molecular-level understanding of the hierarchical assembly of sequence-defined peptoids into multidimensional functional materials, including twisted nanotube bundles serving as a highly efficient artificial light harvesting system. By employing synchrotron-based powder X-ray diffraction and analyzing single crystal structures of model compounds, we elucidated the molecular packing and mechanisms underlying the assembly of peptoids into multidimensional nanostructures. Our findings demonstrate that incorporating aromatic functional groups, such as tetraphenyl ethylene (TPE), at the termini of assembling peptoid sequences promotes the formation of twisted bundles of nanotubes and nanosheets, thus enabling the creation of a highly efficient artificial light harvesting system. This research exemplifies the potential of leveraging sequence-defined synthetic polymers to translate microscopic molecular structures into macroscopic assemblies. It holds promise for the development of functional materials with precisely controlled hierarchical structures and designed functions.

A Cofacial Porphyrin Dimer Generated by Cooperative Zinc Ion Binding

Noncovalent cofacial porphyrin dimers have attracted interest due to their potential use as host materials or catalysts. In this study, we introduce a novel coordination‐directed cofacial porphyrin dimer from a meso‐tetraphenylporphyrin derivative modified with 2,2'bipyridine moieties at the meta positions of the phenyl groups. Spectroscopic investigation has shed light on the binding processes and the structure of the dimer in solution in detail. Initial Zn2+ ion binding to the porphyrin hinders the subsequent Zn2+ binding and the binding of the second porphyrin. However, once the dimer is formed, additional Zn2+ binding is notably enhanced, resulting in a pronounced S‐shaped binding curve. The detailed structure of the dimer in solution was established based on UV‐vis spectroscopy, various 1H NMR spectroscopy techniques and mass spectrometry. Simulations of ringcurrent‐induced chemical shift changes provided evidence for the face‐to‐face porphyrin structure with tetrahedral coordination of the bipyridine ligands. The X‐ray single crystal structure provided conclusive evidence for the structure of the face‐to‐face dimer, which remarkably resembles the model structure from the 1H NMR simulation. The stability of the dimer structure makes it promising for further exploration of this motif in developing new supramolecular structures and for their potential applications as host compounds and catalysts.

Hierarchical Self‐assembly of Multidimensional Functional Materials from Sequence‐defined Peptoids

Hierarchical self‐assembly represents a powerful strategy for the fabrication of functional materials across various length scales. However, achieving precise formation of functional hierarchical assemblies remains a significant challenge and requires a profound understanding of molecular assembly interactions. In this study, we present a molecular‐level understanding of the hierarchical assembly of sequence‐defined peptoids into multidimensional functional materials, including twisted nanotube bundles serving as a highly efficient artificial light harvesting system. By employing synchrotron‐based powder X‐ray diffraction and analyzing single crystal structures of model compounds, we elucidated the molecular packing and mechanisms underlying the assembly of peptoids into multidimensional nanostructures. Our findings demonstrate that incorporating aromatic functional groups, such as tetraphenyl ethylene (TPE), at the termini of assembling peptoid sequences promotes the formation of twisted bundles of nanotubes and nanosheets, thus enabling the creation of a highly efficient artificial light harvesting system. This research exemplifies the potential of leveraging sequence‐defined synthetic polymers to translate microscopic molecular structures into macroscopic assemblies. It holds promise for the development of functional materials with precisely controlled hierarchical structures and designed functions.

Unusual Stabilisation of Remarkably Bent Tetra-Cationic Tetra-radical Intermolecular Fe(III) μ-Oxo Tetranuclear Complexes.

A hitherto unknown series of air stable, π-conjugated, remarkably bent tetra-cation tetra-radical intermolecular Fe(III) μ-oxo tetranuclear complex, isolated from the dication diradical diiron(III) porphyrin dimers, has been synthesised and spectroscopically characterised along with single crystal X-ray structure determination of two such molecules. These species facilitate long-range charge/radical delocalisation through the bridge across the entire tetranuclear unit manifesting an unusually intense NIR band. Assorted spin states of Fe(III) centres are stabilised within these unique tetranuclear frameworks: terminal six-coordinate iron centres stabilise the admixed intermediate spin states while the central five-coordinate iron centres stabilise the high-spin states. Variable temperature magnetic susceptibility measurements indicated strong antiferromagnetic coupling for the Fe(III)-O-Fe(III) unit while the exchange interactions between the Fe centres and the porphyrin π-cation radicals are weaker as supported both by magnetic data and DFT calculations. The nature of orbital overlap between the SOMOs of Fe(III) and π* orbital of the porphyrin was found to rationalise the observed exchange coupling, establishing such a complex magnetic exchange in this tetranuclear model with a significant bioinorganic relevance.

Thermal cycle stability and microstructure of Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals

The Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) ferroelectric single crystals have been commercially available as important components in medical ultrasound transducers due to their excellent piezoelectric and electromechanical coupling performance. The variation in piezoelectric and dielectric properties of PMN-PT single crystals with ambient temperature is an important application indicator. In this work, the PMN-PT single crystals after direct current poling (DCP) and alternating current poling (ACP) were subjected to the cyclic thermal treatment process. The thermal cycling stability and microstructural changes in PMN-PT single crystals were investigated. The ACP single crystals exhibit a higher dielectric constant ε33T/ε0 (6500–7600) and piezoelectric coefficient d33 (2100–2500 pC N−1) compared to the DCP single crystals (ε33T/ε0 of 4100–5000, d33 of 1200–1300 pC N−1). Under thermal cycling at 60 °C, the DCP and ACP single crystals exhibit good thermal cycling stability after 150 cycles. Microstructural observations show that the domain structure of the DCP single crystals exhibits “staggered domain walls, inhomogeneous domain size, variety of domain structure,” while the relatively homogeneous stripe-like domains were observed in the ACP single crystals. After thermal cycling, new fine striped domains appear in both the DCP and ACP single crystals due to the instability of rotated polarization, but the piezoelectric and dielectric properties are not greatly affected. This work provides an intensive understanding of the effects of thermal cycling on the domain structure, which is useful for applications.

Multi-responsive luminescent complex for Fe3+, Cr2O72− and CrO42− species in aqueous solution based on aromatic polycarboxylic acid and imidazole-containing ligand: synthesis, crystal structure and selective detection

One Cadmium(II)-based complex, [Cd(LBIX)(HEA)]n (1), was synthesized using 4,4′-bis((1H-imidazol-1-yl)methyl)-1,1′-biphenyl (LBIX) and 1,2-phenylenediacetic acid (H2HEA) as ligands. The analysis of the single crystal structure reveals that 1 possesses a ladder-like chain structure, which extends into a 3D architecture through π···π interactions. 1 was identified through powder X-ray diffraction analysis (PXRD), elemental analysis (EA), infrared spectroscopy (IR) and thermogravimetric analysis (TGA). It can be seen from the luminescence experiment that 1 has high Ksv value (Cr2O72−: 1.51 × 104 M−1, CrO42−: 1.16 × 104 M−1 and Fe3+: 1.26 × 104 M−1) and lower detection limit (Cr2O72−: 1.14 μM, CrO42−: 1.88 μM and Fe3+: 1.14 μM), it is utilized as a multi-response sensor to recognition Fe3+, CrO42− and Cr2O72− in an aqueous solution. Mechanisms in which fluorescence quenching occurs have been examined using techniques such as PXRD, UV–vis absorption spectra, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Due to its excellent selectivity, high sensitivity and strong stability, it is suitable for detecting Fe3+, CrO42− and Cr2O72− ions as a fluorescent probe.

Crystal structure, spectral characterization, in vitro, molecular docking and DFT studies of pyranopyrazole derivatives

Two Pyranopyrazole derivatives, namely, methyl-11-(2-chlorophenyl)-16-methyl-8-[(4-methylbenzene)sulfonyl], -14-phenyl-12-oxa-8,14,15-triazatetracyclo[8.7.0.02,7.013,17] heptadeca-2(7), 3, 5, 13(17), 15-pentaene-10-carboxylate, C38H37N3S1O5 and butyl‑16-methyl-8-[(4-methylbenzene)sulfonyl]-11,14-diphenyl-12-oxa-8,14,15-triazatetracyclo[8.7.0.02,7.013,17] heptadeca-2(7),3,5, 13(17), 15-pentaene-10-carboxylate, C35 H30 Cl N3 O5 S with phenyl and chlorophenyl substitutions were synthesized successfully, and crystallized by the slow evaporation technique. The pyranopyrazole derivatives were characterized by spectroscopic techniques including UV–visible, FTIR, and mass spectroscopy, and their 3D-structural arrangements were also confirmed by single crystal XRD studies. Both compounds crystallize in the triclinic crystal system with the centrosymmetric space group P-1, which is identified by the X-ray single-crystal structure. These compounds were examined for in vitro and molecular docking studies with the enzymes 1hny, 1pgg, and 4 cox and thus correspond to diabetes and inflammation. The observed results showed better binding energy and inhibition constants for inflammation involving enzymes. The chemical reactivity and electronic arrangement of the compounds have been revealed by DFT studies.

Na3Ge2P3: A Zintl Phase Featuring [P3Ge-GeP3] Dimers as Building Blocks.

Recently, ternary lithium phosphidotetrelates have attracted interest particularly due to their high ionic conductivities, while corresponding sodium and heavier alkali metal compounds have been less investigated. Hence, we report the synthesis and characterization of the novel ternary sodium phosphidogermanate Na3Ge2P3, which is readily accessible via ball milling of the elements and subsequent annealing. According to single crystal X-ray structure determination, Na3Ge2P3 crystallizes in the monoclinic space group P21/c (no. 14.) with unit cell parameters of a = 7.2894(6) Å, b = 14.7725(8) Å, c = 7.0528(6) Å, β = 106.331(6)° and forms an unprecedented two-dimensional polyanionic network in the b/c plane of interconnected [P3Ge-GeP3] building units. The system can also be interpreted as differently sized ring structures that interconnect and form a two-dimensional network. A comparison with related ternary compounds from the corresponding phase system as well as with the binary compound GeP shows that the polyanionic network of Na3Ge2P3 resembles an intermediate step between highly condensed cages and discrete polyanions, which highlights the structural variety of phosphidogermanates. The structure is confirmed by 23Na- and 31P-MAS NMR measurements and Raman spectroscopy. Computational investigation of the electronic structure reveals that Na3Ge2P3 is an indirect band gap semiconductor with a band gap of 2.9 eV.

Elucidation of the Pyridine Ring-Opening Mechanism of 2,2'-Bipyridine or 1,10-Phenanthroline Ligands at Re(I) Carbonyl Complexes.

The cleavage of the C-N bonds of aromatic heterocycles, such as pyridines or quinolines, is a crucial step in the hydrodenitrogenation (HDN) industrial processes of fuels in order to minimize the emission of nitrogen oxides into the atmosphere. Due to the harsh conditions under which these reactions take place (high temperature and H2 pressure), the mechanism by which they occur is only partially understood, and any study at the molecular level that reveals new mechanistic possibilities in this area is of great interest. Herein, we unravel the pyridine ring-opening mechanism of 2,2'-bipyridine (bipy) and 1,10-phenanthroline (phen) ligands coordinated to the cis-{Re(CO)2(N-RIm)(PMe3)} (N-RIm= N-alkylimidazole) fragment under mild conditions. Computational calculations show that deprotonation of the pyridine ring, once dearomatized, is crucial to induce ring contraction, triggering extrusion of the nitrogen atom from the ring and cleavage of the C-N bond. It is noteworthy that different products (regioisomers) are obtained depending on whether the ligand used is bipy or phen due to the additional rigidity and stability conferred by the central ring of the phen ligand, an issue also addressed and clarified computationally. Strong support for the proposed mechanism is provided by the characterization and isolation, including three single-crystal X-ray diffraction structures, of several of the proposed reaction intermediates.

Effect of oxygen-ion implantation on the local electronic structures of strontium-titanate single crystals: An investigation using synchrotron-based x-ray diffraction and x-ray photoemission techniques

Effect of oxygen-ion implantation on the local electronic structures of strontium-titanate single crystals: An investigation using synchrotron-based x-ray diffraction and x-ray photoemission techniques

Supramolecular Entanglement in a Hydrogen-Bonded Organic Framework Enables Flexible-Robust Porosity for Highly Efficient Purification of Natural Gas.

The development of porous materials with flexible-robust characteristics shows some unique advantages to target high performance for gas separation, but remains a daunting challenge to achieve so far. Herein, we report a carboxyl-based hydrogen-bonded organic framework (ZJU-HOF-8a) with flexible-robust porosity for efficient purification of natural gas. ZJU-HOF-8a features a four-fold interpenetrated structure withdiatopology, wherein abundant supramolecular entanglements are formed between the adjacent subnetworks through weak intermolecular hydrogen bonds. This structural configuration could stabilize the whole framework to establish the permanent porosity, but also enable the framework to show some flexibility(so-called flexible-robust framework). The flexible-robust porosity of ZJU-HOF-8a was confirmed by gas sorption isotherms and SCXRDstudies, showing that the flexible pore pockets can be opened by C3H8and n-C4H10rather by C2H6and CH4. This leads to notably higher C3H8and n-C4H10uptakes with enhanced selectivities than C2H6over CH4, affording one of the highest n-C4H10/CH4selectivities. The gas-loaded single-crystal structures coupled with theoretical simulations reveal that the loading of n-C4H10can induce an obvious framework expansion along with pore-pocket opening to improve n-C4H10uptake and selectivity, while not for C2H6adsorption. This work suggests an effective strategy of designing flexible-robust HOFs for improving gas separation properties.

A Triply LinkedCopper(III) Dicarbacorrole Dimer.

A triply linked dicarbacorrole dimer (7) was synthesized from a new meso-meso singly linked dicarbacorrole dimer precursor (6) via an oxidative fusion reaction by 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) in the presence of trifluoromethanesulfonic acid (TfOH). Single crystal X-ray structure of 7 adopts a flat conformation with a length as ca. 15.946 Å and a width as 6.903 Å, which can be regarded as a short carbaporphyrinoid tape. Two coordinated Cu ions keeps the +3 oxidation state in 7, as confirmed by NMR spectroscopy, single crystal X-ray diffraction and X-ray photoelectron spectroscopy (XPS). This is in sharp contrast to the Osuka's triply linked tetrapyrrolic corrole dimers, where the inner 3NH form is not stable and thus can only act as a divalent ligand. Due to the non-aromatic nature of dicarbacorrole macrocycle, the largely decreased HOMO-LUMO gap and red-shifted absorption of 7 are best ascribed to the strong electronic interaction between two dipyrromethene-type chromophores. To our knowledge, this is the first fully fused carbaporphyrinoid dimer with β-β, meso-meso, β-β triply linkages prepared to date.