Silver Ions Research Articles

Protector-free, non-plasmonic silver quantum clusters by femtosecond pulse laser irradiation: in situ binding on nanocellulose filaments for improved catalytic activity and cycling performance.

This study introduces a new, facile method to synthesize silver clusters from aqueous silver ion solution by using high intensity femtosecond pulse laser irradiation. The particles obtained in the absence of reducing or capping agents are 1-17 nm in size and presented quantum properties, as characterized by fluorescence, but did not exhibit plasmon signals, which is not a common characteristic of conventional silver nanoparticles. In a further development, small silver quantum clusters (∼1 nm) were bound in situ to wet-spun filaments of cellulose nanofibrils by pulsed laser irradiation. The obtained hybrid filaments as well as free silver quantum clusters revealed a catalytic activity remarkably higher than that of free gold quantum clusters; moreover, the hybrid filaments were found to show improved stability and cycling performance for silver-based catalysis. The present results indicate the potential of femtosecond laser irradiation to generate clusters as well as hybrid systems with excellent performance and reactivity.

Highly sensitive and selective fluorescent "turn-on" sensor for Ag+ detection using MAPbBr3@PCN-221(Fe): An efficient Ag+-bridged energy transfer from perovskite to MOF.

Metal ion-induced water pollution is attracting increasing public attention. Perovskite quantum dots and metal-organic frameworks (MOFs), owing to their outstanding properties, hold promise as ideal probes for detecting metal ions. In this study, a composite material, MAPbBr3@PCN-221(Fe), was prepared by encapsulating MAPbBr3 quantum dots with PCN-221(Fe), demonstrating high chemical stability and good reusability. The composite material shows a sensitive fluorescence turn-on signal in the presence of silver ions. The fluorescence intensity of the composite material exhibits a linear relationship with the concentration of Ag+ in the solution, with a low detection limit of 8.68 µM. Moreover, the fluorescence signal exhibits a strong selectivity for Ag+, enabling the detection of Ag+ concentration. This fluorescence turn-on signal originates from the Ag+-bridged energy transfer from the conductive band of MAPbBr3 to the excited state of the MOF, which is directly proportional to the concentration of silver ions. Simultaneously, this finding may open up a new possibility in artificial controlled energy transfer from perovskite to MOF for future development.

Enhanced Mechanical Strength and Sustained Drug Release in Carrier-Free Silver-Coordinated Anthraquinone Natural Antibacterial Anti-Inflammatory Hydrogel for Infectious Wound Healing.

The persistent challenge of healing infectious wounds and the rise of bacterial resistance represent significant hurdles in contemporary medicine. In this study, based on the natural small molecule drug Rhein self-assembly to form hydrogels and coordinate assembly with silver ions (Ag+), a sustained-release carrier-free hydrogel with compact structure is constructed to promote the repair of bacterial-infected wounds. As a broad-spectrum antimicrobial agent, Ag+ can avoid the problem of bacterial resistance caused by the abuse of traditional antibiotics. In addition, due to the slow-release properties of Rhein hydrogel, continuous effective concentration of Ag+ at the wound site can be ensured. The assembly of Ag+ and Rhein makes the hydrogel system with enhanced mechanical stability. More importantly, it is found that Rhein effectively promotes skin tissue regeneration and wound healing by reprogramming M1 macrophages into M2 macrophages. Further mechanism studies show that Rhein realizes its powerful anti-inflammatory activity through NRF2/HO-1 activation and NF-κB inhibition. Thus, the hydrogel system combines the excellent antibacterial properties of Ag+ with the excellent anti-inflammatory and tissue regeneration ability of Rhein, providing a new strategy for wound management with dual roles.

Developing new Hydrazine Carbothioamide Molecules for Selective Colorimetric/Fluorometric Detection of Environmentally Essential Hg2+ and Ag+ Metal Ions in Mixed Aqueous Media

Developing new Hydrazine Carbothioamide Molecules for Selective Colorimetric/Fluorometric Detection of Environmentally Essential Hg2+ and Ag+ Metal Ions in Mixed Aqueous Media

Green Synthesis of Silver Nanoparticles and their Potential Applications in Mitigating Cancer.

In recent years, the field of nanotechnology has brought about significant advancements that have transformed the landscape of disease diagnosis, prevention, and treatment, particularly in the realm of medical science. Among the various approaches to nanoparticle synthesis, the green synthesis method has garnered increasing attention. Silver nanoparticles (AgNPs) have emerged as particularly noteworthy nanomaterials within the spectrum of metallic nanoparticles employed for biomedical applications. AgNPs possess several key attributes that make them highly valuable in the biomedical field. They are biocompatible, cost-effective, and environmentally friendly, rendering them suitable for various bioengineering and biomedical applications. Notably, AgNPs have found a prominent role in the domain of cancer diagnosis. Research investigations have provided evidence of AgNPs' anticancer activity, which involves mechanisms such as DNA damage, cell cycle arrest, induction of apoptosis, and the regulation of specific cytokine genes. The synthesis of AgNPs primarily involves the reduction of silver ions by reducing agents. Interestingly, natural products and living organisms have proven to be effective sources for the generation of precursor materials used in AgNP synthesis. This comprehensive review aims to summarize the key aspects of AgNPs, including their characterization, properties, and recent advancements in the field of biogenic AgNP synthesis. Furthermore, the review highlights the potential applications of these nanoparticles in combating cancer.

Multifunctional Composite Scaffold with Nanosilver, Graphene Oxide, and Macrophage Membrane Vesicles for Sequential Treatment of Infected Bone Defects.

The management of infected bone defects poses a significant clinical challenge, and current treatment modalities exhibit various limitations. This study focuses on the development of a multifunctional composite scaffold comprising nanohydroxyapatite/polyethyleneglycol diacrylate matrix, silver nanoparticles, graphene oxide (GO), sodium alginate, and M2-type macrophage membrane vesicles (MVs) to enhance the healing of infected bone defects. The composite scaffold demonstrates several key features: first, it releases sufficient quantities of silver ions to effectively eliminate bacteria; second, the controlled release of MVs leads to a notable increase in M2-type macrophages, thereby significantly mitigating the inflammatory response. Additionally, GO acts synergistically with nanohydroxyapatite to enhance osteoinductive activity, thereby fostering bone regeneration. Through meticulous in vitro and in vivo investigations, the composite scaffold exhibits broad-spectrum antimicrobial effects, robust immunomodulatory capabilities, and enhanced osteoinductive activity. This multifaceted composite scaffold presents a promising approach for the sequential treatment of infected bone defects, addressing the antimicrobial, immunomodulatory, and osteogenic aspects. This study introduces innovative perspectives and offers new and effective treatment alternatives for managing infected bone defects.

Plant-assisted green preparation of silver nanoparticles using leaf extract of Dalbergia sissoo and their antioxidant, antibacterial and catalytic applications.

Plant-mediated preparation of silver nanoparticles (AgNPs) is thought to be a more economical and environmentally benign process in comparison to physical and chemical synthesis methods. In the present study, the aqueous leaf extract of Dalbergia sissoo was prepared and utilized to reduce silver ion (Ag+) during the green synthesis of silver nanoparticles (DL-AgNPs). The formation of DL-AgNPs was verified using UV-Vis spectra, exhibiting the surface plasmon resonance (SPR) band at around 450nm. FT-IR analysis revealed the kinds of phytochemicals that serve as reducing and capping agents while DL-AgNPs are being synthesized. Analysis of scanning electron microscope (SEM) and high-resolution transmission electron microscopy (HR-TEM) images verified the development of spherical and oval-shaped DL-AgNPs, with sizes ranging from 10 to 25nm. The stability and particle size distribution of synthesized DL-AgNPs were ensured by zeta potential and DLS (dynamic light scattering) investigations. Additionally, X-ray diffraction (XRD) analysis confirmed the crystalline nature of DL-AgNPs. In antioxidant experiments, DL-AgNPs demonstrated significant scavenging capacities of DPPH and ABTS radicals with EC50 values of 51.32 and 33.32μg/mL, respectively. The antibacterial activity of DL-AgNPs was shown to be significant against harmful bacteria, with a maximum zone of inhibition (21.5 ± 0.86mm) against Staphylococcus aureus. Furthermore, DL-AgNPs exhibited effective catalytic activity to degrade environment-polluting dyes (methylene blue, methyl orange, and Congo red) and toxic chemicals (p-nitrophenol). The results of all these studies suggested that DL-AgNPs made from the leaf extract of Dalbergia sissoo have merit for application in the environmental and biomedical fields.

Development of Stable Water-Soluble Supratomic Silver Clusters Utilizing A Polyoxoniobate-Protected Strategy: Giant Core-Shell-Type Ag8@Nb162 Fluorescent Nanocluster.

Atomically precise low-nuclearity (n<10) silver nanoclusters (AgNCs) have garnered significant interest due to their size-dependent optical properties and diverse applications. However, their synthesis has remained challenging, primarily due to their inherent instability. The present study introduces a new feasible approach for clustering silver ions utilizing highly negative and redox-inert polyoxoniobates (PONbs) as all-inorganic ligands. This strategy not only enables the creation of novel Ag-PONb composite nanoclusters but also facilitates the synthesis of stable low-nuclearity AgNCs. Using this method, we have successfully synthesized a small octanuclear rhombic [Ag8]6+ AgNC stabilized by six highly negative [LiNb27O75]14- polyoxoanions. This marks the first PONb-protected superatomic AgNC, designated as {Ag8@(LiNb27O75)6} (Ag8@Nb162), with an aesthetically spherical core-shell structure. The crystalline Ag8@Nb162 is stable under ambient conditions, What's more, it is water-soluble and able to maintain its molecular cluster structure intact in water. Further, the stable small [Ag8]6+ AgNC has interesting temperature- and pH-dependent reversible fluorescence response, based on which a multiple optical encryption mode for anti-counterfeit technology was demonstrated. This work offers a promising avenue for the synthesis of fascinating and stable PONb-protected AgNCs and sheds light on the development of new-type optical functional materials.

Insights on the effect of process conditions on the optical properties of silver ion exchanged soda-lime silicate glass

The effects of ion exchange time and temperature on the optical properties and plasmonic response of silver ion exchanged soda-lime silicate glass were investigated using scanning electron microscopy (SEM) in energy dispersive spectrometry (EDS) configuration, m-lines spectroscopy, photoluminescence (PL) spectroscopy, and UV–visible absorption spectroscopy. SEM analyses in EDS mode provided profiles of silver oxide molar concentration. These profiles were directly correlated to the silver diffusion coefficient using an adjustment procedure. The effective indices of ion exchanged glasses measured by the standard prism coupling technique (m-lines) allowed access to refractive index distributions in ion exchange regions. These ion-exchanged glasses underwent evaluation to determine their potential suitability for use in multimode planar systems. The PL results acquired after ion exchange demonstrated that the creation of Ag0 atoms from Ag+ ions was responsible for the decline and quenching of PL intensity at ion exchange times and temperatures increase. Silver nanoparticles were generated in the samples subjected to ion exchange at 480 °C without the need for post-exchange treatments. The emergence of the surface plasmon resonance band around 427 nm in the optical absorption spectra confirmed the formation of Ag nanoparticles in annealed glasses. Estimates of the UV–visible absorption spectra indicated an average size of silver nanoparticles ranging from 1.8 to 2.4 nm.

Development of Stable Water‐Soluble Supratomic Silver Clusters Utilizing A Polyoxoniobate‐Protected Strategy: Giant Core‐Shell‐Type Ag8@Nb162 Fluorescent Nanocluster

Atomically precise low‐nuclearity (n&lt;10) silver nanoclusters (AgNCs) have garnered significant interest due to their size‐dependent optical properties and diverse applications. However, their synthesis has remained challenging, primarily due to their inherent instability. The present study introduces a new feasible approach for clustering silver ions utilizing highly negative and redox‐inert polyoxoniobates (PONbs) as all‐inorganic ligands. This strategy not only enables the creation of novel Ag‐PONb composite nanoclusters but also facilitates the synthesis of stable low‐nuclearity AgNCs. Using this method, we have successfully synthesized a small octanuclear rhombic [Ag8]6+ AgNC stabilized by six highly negative [LiNb27O75]14‐ polyoxoanions. This marks the first PONb‐protected superatomic AgNC, designated as {Ag8@(LiNb27O75)6} (Ag8@Nb162), with an aesthetically spherical core‐shell structure. The crystalline Ag8@Nb162 is stable under ambient conditions, What’s more, it is water‐soluble and able to maintain its molecular cluster structure intact in water. Further, the stable small [Ag8]6+ AgNC has interesting temperature‐ and pH‐dependent reversible fluorescence response, based on which a multiple optical encryption mode for anti‐counterfeit technology was demonstrated. This work offers a promising avenue for the synthesis of fascinating and stable PONb‐protected AgNCs and sheds light on the development of new‐type optical functional materials.

Nanocomposite of ZIF-67/reduced graphene oxide as sensing element for voltammetric detection of silver(I) ion: optimizing operational conditions by half-fraction central composite design

Nanocomposite of ZIF-67/reduced graphene oxide as sensing element for voltammetric detection of silver(I) ion: optimizing operational conditions by half-fraction central composite design

Maize leaves as a precursor for the synthesis of greened silver nanocomposite and nanoparticles

This study is aimed at the synthesis of nanoparticles (NPs) and nanocomposite (NC) using maize leave as precursor. Silver NPs (AgNPs) and AgNCs were synthesized from silver nitrate and maize leave extract using green approach. The maize leave NPs (AgNPs) and the maize leave NCs (AgNCs) were characterized using Fourier Transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersion x-ray (EDX), Brunauer–Emmett–Teller (BET) surface area measurement, and dynamic light scattering (DLS) particle size analysis. The phytochemical analysis revealed the presence of tannin, oxalate, and flavonoids in appreciable quantity, which have proven to be a powerful reducing agent that facilitates the reduction of silver ions for the synthesis of silver NPs and silver nano composites. FTIR revealed that all the peaks identified in AgNPs and AgNCs belong to the characteristic bands of reducing compounds such as flavonoid compounds. The SEM-EDX results showed that the peaks observed from 2.9 to 3.1 Kev in the spectra indicate the presence of elemental silver as it is reduced from Ag+ to Ag. DLS analysis results showed that the average size and polydispersity index (PdI) of the synthesized AgNPs and AgNCs were 42.30 and 68.29 nm, 0.691 and 0.270, respectively. The single point BET surface area (m2/g) obtained for AgNPs and AgNCs were 223.3 and 209.5, respectively. The results showed maize leave as a potential precursor for the preparation of NPs and NCs.

Development of an innovative colorimetric optical sensor for the detection of silver ions in environmental and biological samples

ABSTRACT A recently developed optical chemical sensor for silver assessment relies on polymer inclusion membranes (PIM) and avoids the use of plasticisers. This innovative optical sensor is constructed through a physical immobilisation process known as the encapsulation technique, resulting in an optical chemical membrane. The suggested PIM integrates 2-(2`-hydroxynaphthylazo)benzo-thiazole (HNABT) was used as a colorimetric reagent, polyvinyl chloride (PVC) as the foundational polymer, and dinonyl naphthalene sulphonic acid (DNNS) as an extractant. The created PIM demonstrates heightened responsiveness within the described approach, credited to the sensor membrane, in contrast to the optical sensor without PIM. The achieved results demonstrated that the sensor response was based on some factors such as plasticiser, film thickness, stirring effect, HNABT concentration, DNNS concentration and pH of the aqueous solution. Within the measurement range spanning from 7.5 to 250 ng mL−1 of Ag+ at pH 7.75, the absorbance response exhibits a notable correlation, achieving detection and quantification limits of 2.3 and 7.3 ng mL−1, respectively. The λmax for the PIM-based sensor registers at 577 nm. Additionally, the reproducibility and repeatability of the system are characterised by RSD of 2.25% and 1.13%, respectively, with a swift response time of approximately 3.0 min. The optode membrane’s selectivity is scrutinised in pH-buffered solutions concerning Ag+ ions. The proposed sensor is effectively applied for Ag+ assessment in food, water, environmental, and biological samples. The obtained results are corroborated by the FAAS procedure.

Features of obtaining composite material from hydrophobic clay with antimicrobic properties

A method for obtaining a nanocomposite from hydrophobic clays with bactericidal properties is considered, which plays the role of a drug matrix intercalated agar-agar. Such nanocomposite materials are increasingly used in medicine as matrices for medicines and vitamins using their adsorption properties and long-term exposure. It was established using TEM analysis that halloysite particles from Beloye Glinische deposit are nanoscale and have a cylindrical shape with a length from 200 nm to 1000 nm and a diameter of nanoparticles from 50 nm to 80 nm. The first stage of the bionanocomposites manufacturing process was the treatment of halloysite nanoparticles with silver ions to impart antimicrobial properties, and hydrophobization with a cationic surfactant was carried out at the next stage. It was established by the X-ray diffraction method that the interlayer space of HNT has been expanded from 9.998 Å to 17.5 Å on the result of the cationic adsorption on the HNT. FTIR spectroscopy also proved the adsorption of surfactant molecules on halloysite by the presence of an appropriate absorption band. The adsorption of silver on a nanotube made of halloysite was revealed by the method of energy-dispersive X-ray spectroscopy. Antimicrobial properties of silver-treated and organophilic halloysite have been established and proved by in vitro analyses in microbiological laboratories about Escherichia coli. Hydrophobic samples of these organophilic clays had edge angles higher than 90° and this proves that all samples are hydrophobic. The resulting organophilic clays were intercalated into an agar-agar matrix and were thrown into a solution of calcium chloride, which gave them stability in a liquid medium. It has been practically established that the most optimal bionanocomposite microsphere is a 50% ratio of organohalloysite and agar-agar.

Antimicrobial properties of bimetallic-containing mesoporous bioglass against Enterococcus faecalis

Background/purpose:Various pulp-covering materials offer advantages in regenerative root canal treatment, but each has limitations, highlighting the need for more effective antibacterial strategies for pulp repair and regeneration. Mesoporous bioactive glasses (MBG) show significant biological activity, making them valuable in tissue/dental repair. Silver-incorporated MBG exhibits promising antibacterial effects against various bacteria; copper ions are crucial in regulating angiogenesis signals. Co-loading copper and silver in bioactive glasses has been explored to address clinical challenges. This study modified the preparation of silver-copper bimetallic mesoporous bioactive glass, analyzing their textural properties and antibacterial activity against Enterococcus faecalis. Materials and methodsThe silver-copper co-loaded bioactive glass (designated as AgCu/80S) was synthesized using a sol–gel technique with modifications. Textural analyses were carried out via X-ray diffraction, UV–Vis spectroscopy, Brunauer–Emmett–Teller analysis, and transmission electron microscope. The ion-releasing activity determined using inductively coupled plasma-mass spectrometry, and the antibacterial activity against E. faecalis was assessed through disk diffusion and kinetic bacterial growth curve. ResultsThe modification led to weaker crystallization of calcium silicate, altering ion-releasing and antibacterial activities. Ag3Cu2/80S exhibited the highest released silver ion concentration at 112.6 ppm, with an inhibition zone of 9.09 ± 0.09 mm in disk diffusion assays. However, the inhibition zone of Ag2Cu3/80S was 9.92 ± 0.04 mm, implying that the antibacterial activity may not only be influenced by silver ions. ConclusionThe AgCu/80S showed a potential antibacterial activity against E. faecalis, whereas further research on AgCu/80S glasses is necessary to optimize ion release conditions, assess bioactivities, and explore potential dental applications.

Preparation of silver nitroprusside nanoparticles for enhanced acid red 94 removal from effluent: A study on synergistic adsorption and photocatalytic processes, with toxicological assessment

Toxic dye pollution in water is an urgent global environmental issue. The synergistic action of adsorption and degradation has shown great removal effects for treating toxic dyes in aqueous environments. Silver ions and nitroprusside salts exhibit excellent antimicrobial, anticancer, and biocompatibility properties and are widely used in the pharmaceutical field; however, their application in environmental treatment has not been extensively explored. Hence, we prepared novel and highly efficient silver nitroprusside nanoparticles (Ag2[Fe(CN)5NO] NPs) through a one-pot reaction using sodium nitroprusside and silver nitrate for the first removal of acid red dye (AR 94). Furthermore, Ag2[Fe(CN)5NO] NPs were characterized using various analytical techniques. The Ag2[Fe(CN)5NO] NPs have both cubic and rod-like structures with a size of 107.46 ± 34.54 d.nm, the PDI is 0.263 ± 0.018 and the zeta potential is −46.9 ± 0.026 mV. In addition, the synergistic adsorption and degradation performance of Ag2[Fe(CN)5NO] NPs was evaluated. The removal efficiencies of Ag2[Fe(CN)5NO] NPs on AR 94 can reach more than 95 % under natural light irradiation and optimal reaction conditions of 60 mg/L AR 94 dye concentration, pH 6, temperature 45 °C, and time 6 h. After 5 cycles of recycling, the removal efficiency remained above 90 %. The aqueous solution obtained after removing AR 94 demonstrated no adverse effects on Zea mays L. seed growth. It also exhibited low toxicity to Artemia salina. These results emphasize the potential of Ag2[Fe(CN)5NO] NPs as an efficient and environmentally friendly material for the removal of dyes from aqueous environments.

Solution-processable polymers of intrinsic microporosity for selective silver removal from aqueous solution and subsequent disinfection by silver-laden coatings

Silver ions (Ag+) in waterways pose a growing threat to the environment and living organisms. Achieving an effective and green process for Ag+ removal requires an adsorbent with excellent specificity for silver ions and easy recoverability after fouling or blocking. However, this remains a major challenge. To address this concern, we developed a high-performance adsorbent by grafting polymers of intrinsic microporosity (PIM) with thioamide groups. This thioamide-modified PIM (TPIM-1) adsorbent exhibited an exceptional adsorption capacity of 656 mg g−1 and high selectivity (distribution coefficient of 833.3 mL g−1, selectivity coefficient of 346 over Cd2+) for aqueous Ag+ removal. TPIM-1 also features good solubility in selected solvents, allowing regeneration through a dissolution separation precipitation (DSP) procedure once fouling or blocking occurs. Over 80 % of the adsorption capacity was recovered after nine continuous regeneration cycles, showcasing potential cost-effective reusability. Density Functional Theory (DFT) results reveal that the grafted thioamide groups play a critical role in selective Ag+ adsorption, with a binding energy of 54 kcal mol−1. In addition, the Ag+-loaded PIM-coated glass surface showed excellent antibacterial ability, inhibiting the growth of Bacillus subtilis and E. coli. This study provides a viable strategy for the development of a low-carbon footprint silver removing adsorbent from wastewater.

Catalytic post-treatment of homogeneous Ag-S2O8 and Cu-H2O2 advanced oxidation processes: revealing the importance of capacitive-Faradaic electrochemical structure of Pt/AC

Implementation of homogeneous advanced oxidation processes (HAOPs) catalysed by Cu and Ag metals is limited due to high residual concentrations of oxidants and dissolved metals. The proposed post-treatment process starts with recirculation of H2-enriched HAOP-treated water through the Pt-loaded activated carbon (AC). Hydrogen oxidation reaction (HOR) on Pt results in degradation of oxidants while silver and/or copper ions are reduced and deposited on the catalytic media. The subsequent aeration of the catalyst results in oxygen reduction reaction (ORR) and oxidation of the metals back into ionic forms. In doing so, the homogeneous metal catalysts can be reused in numerous HAOP cycles.The capacitive-Faradaic electrochemical structure of the Pt/AC catalyst with Pt acting as a Faradaic electrode and AC as a capacitive electrode plays an important role in the process. The HOR on Pt/AC results in accumulation of electrons in electrical double layer of AC. These electrons can be effectively used in a subsequent H2-free reduction of metal ions and oxidants. Thus, the degradation of H2O2 and S2O82- and reduction of Cu2+ and Ag+ ions proceed much faster if the H2-step of the process is split into two sub-processes: (i) hydrogenation of Pt/AC catalyst in an inert Na2SO4 solution to pre-charge the Pt/AC with electrons originating at HOR, followed by (ii) catalytic reduction of oxidants and metal ions by the capacitively stored electrons.The process was investigated using Ag-S2O82- ([S2O82-]0 =25 mM; [Ag+]0 =50 mg/L) and Cu-H2O2 ([H2O2]0 =100, [Cu]0 =635 mg/L) solutions. Total degradation of oxidants was achieved within < 2 h and complete metals’ recovery was obtained. Several cycles of HAOP experiments were performed for the degradation of 1,4-dioxane (10 mg/L) and phenol (25 mg/L) using Ag- S2O82- and Cu-H2O2 HAOPs, respectively. The residual oxidants were completely degraded in all experiments. The reactivation of Pt/AC catalysts inhibited by phenol derivatives was achieved by hydrogenation in Na2SO4 solution (i.e., using the pre-charge approach).

Design of defective silver phosphate photocatalyst using Nigella sativa seed aqueous extract for enhanced photocatalytic activity

New properties of the Ag3PO4 material have been successfully designed through surface modification of the material using natural extracts of Nigella sativa seeds. This research aims to induce changes in the band gap, defects, and atomic composition on the surface of Ag3PO4 through the coprecipitation method with Nigella sativa seed aqueous extract (NSE). The mixture of phosphate ion solution and NSE was reacted drop by drop with silver ion solution followed by aging treatment. The synthetic products were characterized using XRD, FE-SEM, FTIR, DRS, PL, Raman, and XPS. Rhodamine B dye was used as a target pollutant for photocatalytic evaluation. The results showed that NSE significantly induced changes in the band gap energy, defects, and atomic composition in the Ag3PO4 surface. The photocatalytic rate of Ag3PO4 treated with NSE increased up to 11 times higher than that of samples without NSE. This extraordinary activity is mainly due to the presence of active hole species in the valence band.

In Situ Photoactivated Antibacterial and Antioxidant Composite Materials to Promote Bone Repair.

Trauma and tumor removal usually cause bone defects; in addition, the related postoperative infection also shall be carefully considered clinically. In this study, polylactic acid (PLLA) composite fibers containing Cerium oxide (CeO2) are first prepared by electrospinning technology. Then, the PLLA/CeO2@PDA/Ag composite materials are successfully prepared by reducing silver ion (Ag+) to nano-silver (AgNPs) coating in situ and binding AgNPs to the materials surface by mussel structure liked polydopamine (PDA). In the materials, Ag+ can be slowly released in simulated body fluids. Based on the photothermal performance of AgNPs, the photothermal conversion efficiency of the materials is 21%, under NIR 808nm illumination. The effective photothermal conversion can help materials fighting with E. coli and S. aureus in 3 h, with an antibacterial rate of 100%. Additionally, the sustained Ag+ release contributes to the antibacterial in long term. Meanwhile, the materials can mimic the bio-behavior of superoxide dismutase and catalase in decreasing the singlet oxygen level and removing the excess reactive oxygen species. Furthermore, the materials are beneficial for cell proliferation and osteogenic differentiation in vitro. In this study, a promising bone-regenerated material with high photothermal conversion efficiency and antibacterial and anti-oxidation properties, is successfully constructed.