Hydroxypropyl Research Articles

Influence of Ti-incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2.

Vapor-phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules ("solvent") near active sites even without a bulk liquid phase. Steady-state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2

Vapor‐phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.

A Low-Noble-Metal Ru@CoMn2O4 Spinel Catalyst for the Efficient Oxidation of Propane

Noble metals have become a research hotspot for the oxidation of light alkanes due to their low ignition temperature and easy activation of C-H; however, sintering and a high price limit their industrial applications. The preparation of effective and low-noble-metal catalysts still presents profound challenges. Herein, we describe how a Ru@CoMn2O4 spinel catalyst was synthesized via Ru in situ doping to promote the activity of propane oxidation. Ru@CoMn2O4 exhibited much higher catalytic activity than CoMn2O4, achieving 90% propane conversion at 217 °C. H2-TPR, O2-TPD, and XPS were used to evaluate the catalyst adsorption/lattice oxygen activity and the adsorption and catalytic oxidation capacity of propane. It could be concluded that Ru promoted synergistic interactions between cobalt and manganese, leading to electron transfer from the highly electronegative Ru to Co2+ and Mn3+. Compared with CoMn2O4, 0.1% Ru@CoMn2O4, with a higher quantity of lattice oxygen and oxygen mobility, possessed a stronger capability of reducibility, which was the main reason for the significant increase in the activity of Ru@CoMn2O4. In addition, intermediates of the reaction between adsorbed propane and lattice oxygen on the catalyst were monitored by in situ DRIFTS. This work highlights a new strategy for the design of a low-noble-metal catalyst for the efficient oxidation of propane.

Synergizing tetra-coordinated Ti sites anchored onto micropore-free silica with Au sites to boost propylene hydro-oxidation

Constructing tetra-coordinated Ti sites on the micropore-free oxide surface as a substitute for the Ti-containing zeolites to synergize with Au sites for propylene epoxidation with H2 and O2 to propylene oxide (HOPO) can solve the problems resulting from micropores but remains a great challenge. Here, we report a facile strategy to anchor tetra-coordinated Ti sites onto micropore-free silica by precisely cleaving the surface hydroxyl and siloxane bridges of silica to generate under-coordinated O sites to bind Ti sites. Multiple spectroscopic characterizations, including ultraviolet Raman, UV–vis and Fourier transformation infrared and 29Si solid nuclear magnetic resonance spectroscopy, demonstrate the anchored Ti sites on the surface of silica are mainly the target tetra-coordinated ones. It is further unveiled that the removal of surface hydroxyl also improves the hydrophobicity of synthesized Ti-SiO2, which enhances the desorption of PO. Benefitting from the weak acidic properties, high hydrophobicity and micropore-free structures, the tetra-coordinated Ti sites on silica synergize well with Au sites in propylene epoxidation, demonstrating high activity, selectivity and stability, which are superior to those achieved on the most extensively researched Au/TS-1 catalysts.

DEVELOPMENT AND OPTIMIZATION OF A DOLUTEGRAVIR NANOSUSPENSION USING BOX BEHNKEN DESIGN

Objective: This study aimed to develop and optimize a nanosuspension of Dolutegravir, an integrase inhibitor with low aqueous solubility, using the sonoprecipitation technique. The objective was to enhance the drug's solubility and oral bioavailability by preparing nanosuspension. Methods: A box-behnken design was employed to systematically investigate the impact of stabilizer concentration, sonication amplitude, and time on the particle size and polydispersibility of the nanosuspension formulations. Various stabilizers, including Soluplus®, Poloxamer 188, Poly Vinyl Pyrrolidone (PVP) K90, Hydroxy Propyl Methyl Cellulose (HPMC), and Tween 80, were evaluated. Fourier transform infrared spectroscopy confirmed drug-polymer interactions, while differential scanning calorimetry and X-ray diffraction revealed partial amorphization. Scanning electron microscopy confirmed nanoscale particle size and morphology. Results: The optimized formulation (NS6) with 1% Soluplus®, 65 W amplitude, and 10 min sonication exhibited nanoparticles of 75.3 nm with low polydispersity. NS6 demonstrated enhanced drug release compared to the pure drug, attributed to particle size reduction and amorphization. In vitro tests indicated acceptable stability over time and temperature. Conclusion: The application of Box-Behnken design resulted in an optimized nanosuspension formulation capable of improving the oral bioavailability of poorly soluble Dolutegravir. The formulation exhibited favorable characteristics, including reduced particle size, amorphization, and enhanced drug release, highlighting its potential as an effective delivery system for Dolutegravir in Human Immuno Deficiency Virus (HIV) treatment.

Migration roles of different oxygen species over Cu/CeO2 for propane and soot combustion

Determining the migration rules of oxygen species in catalytic combustion, especially for catalysts composed of transition metal oxides, is essential yet challenging. This study hydrothermally synthesized nanosphere-structured cerium dioxide (CeO2) and its copper-loaded catalysts (Cu/CeO2) to identify the distinct functions of superficial oxygen species (O) and lattice oxygen (O2–). The presence of Cu-Ce solid solution at the Cu/CeO2 interface lowered the apparent activation energy for the catalytic combustion of propane and soot. The catalytic combustion of propane followed the Mars-van Krevelen mechanism, with O2– serving as the dominant reactive phase while O played a subordinate role. The solid–solid reaction between soot and superficial oxygen of the catalyst was responsible for catalyzed soot combustion. The O species produced by surface defective sites exhibited higher activity than O2–, which drained easily at the beginning of the reactions. The isotopic oxygen exchange tests revealed the mechanism of metal oxide (CuO/CeO2) interactions for active oxygen species migration, with the results demonstrating the solid solution at the phase interface as portholes for oxygen migration, thus increasing oxygen mobility between the gaseous phase and the surface by lowering the migration activation energy. In situ, infrared results showed that the reaction path of soot catalytic combustion was single, without any intermediate production formation, compared to multiple paths in the propane oxidation process. This study provided an easily implemented and widely applicable method, which deepens our understanding of the characterization of the function and migration of predominant oxygen species in diverse combustion reactions involving oxide-based catalysts. Additionally, this study clarified differences and similarities between the reaction mechanisms of solid–solid and solid–gas catalysis.

Novel strategy to regulate the geometric and electronic structure of Pt catalyst for efficient propane combustion

The geometric and electronic structure of Pt active sites plays a crucial role in determining the catalysts performance, but precise regulation remains challenging. Herein, we propose a novel approach to modulate the nature of Pt active sites by combining photo-deposition of Pt nanoparticles with ultra-low Mo loading (0.1 wt%) modification on Pt/SiO2 catalysts. The addition of ultra-low loading Mo promoter not only effectively reduces the size of Pt particles but also donates electrons to the Pt particles. Furthermore, the photo-deposited Pt particles exhibit a higher proportion of metallic Pt species, which is more stable than that metallic Pt species obtained by H2 reduction, compared to those prepared using traditional wetness impregnation methods. Propane oxidation activity evaluations confirm that the photo-deposited and Mo-modified Pt/0.1Mo/SiO2-P catalyst exhibits the highest activity among all the prepared catalysts. Combined with experiments of C3H8-TPSR and in-situ DRIFT spectra of propane oxidation, it is found that the Pt/0.1Mo/SiO2-P catalyst remarkably promotes propane activation and C-H bond cleavage due to the nature change of Pt active sites, and the presence of gaseous oxygen benefits propane cleavage on active sites. Our primary results provide a promising strategy for designing superior platinum catalysts by regulating Pt active sites nature for efficient propane complete oxidation.

Low molar mass polycarbonate diols from degradation of terpolymers obtained by epoxide/o-phthalaldehyde/CO2 copolymerization

In this manuscript, we describe the synthesis of low molar mass polycarbonate diols by acid cleavage of labile acetal linkages included in high molar mass poly(ether-co-carbonate-co-acetal) terpolymers. These copolymers were prepared by terpolymerization of propylene oxide (PO) with o-phthalaldehyde (OPA) and carbon dioxide (CO2), using triethyl borane (TEB) as activator and an onium salt as initiator. The advantage of this strategy of synthesis of poly(propylene carbonate) diols (PPC-diols) lies in the minute amounts of TEB and initiator required. Moreover, OPA could be isolated through post-hydrolysis of the terpolymers and recycled for subsequent use. We also demonstrated that this strategy works for the synthesis of low molar mass poly(ethylene carbonate) diols (PEC-diols). The structural integrity of the terpolymers before and after acid treatment, the characterization of low molar mass PPC-diols, and recycling process of OPA were carried out by 1H NMR spectroscopy, gel permeation chromatography, and matrix-assisted laser desorption ionization time of flight (MALDI-TOF) MS.

Effect of hydroxy propyl cellulose grade and foam quality on foam granulation of a high drug load formulation

Foam granulation is a relatively newer wet granulation process whereby foamed binder solutions are added to the powders in the mixer to reduce localized over-wetting encountered during the wet granulation. This study is the first to investigate the effect of binder grade and foam quality on foam granulation process and granule properties of a high drug load formulation. Two different HPC grades, HPC LF (two times more viscous) and HPC EXF at an equivalent 7.4%w/w solution concentration, and foam quality of 50%, 90% and binder solution dripped were added to a high drug load (81%w/w) formulation for wet granulation. The granules were evaluated for compactibility and resultant compact strengths. The 50% foam quality of either HPC LF and HPC EXF resulted in lowest impeller power reading and water activity compared to 90% foam quality or dripped HPC solution. Granules prepared with 50% foam quality also exhibited smaller granule size, wider size distribution and higher specific surface area, resulting in higher compactibility. Whilst the granules prepared with different foamed HPC grades were not significantly different in compression behavior, they were higher in compact strengths, suggesting that foam mixing was more efficient in binder distribution compared to binder liquid penetration and distribution.

Low-temperature activated porous carbon with functional groups derived from waste tea powder as a potential catalyst for CO2 fixation into cyclic carbonates

The globe is currently confronted with two main environmental problems: environmental solid waste and greenhouse gases. Thus, it is urgent to mitigate these issues and convert them into value-added products. In this context, this work demonstrated the mitigation of two global issues with a single approach. This work established a facile process for a hierarchical porous carbon from abundant bio-waste, such as waste tea powder, and employed it as a heterogeneous catalyst for CO2 fixation into cyclic carbonate. Derived porous carbon catalysts, WTC-1 (Waste tea carbon), WTC-2, AWTC-2-400 (Activated waste tea carbon), AWTC-2a-400, AWTC-2-600, and AWTC-2-800, were produced without the use of solvent by acid-free washing and KOH-free activation. These WTC catalysts were characterized by several standard techniques: XRD, FTIR, XPS, SEM, BET, and TPD. Among the low-temperature activated carbon catalysts, AWTC-2a-400 with potassium-based salt, KI exhibited excellent conversion of propylene oxide (98 %) and ≥ 99 % selectivity of propylene carbonate without solvent under mild conditions of 2.5 MPa, 120 oC, and 2 h. It was observed that the catalytic activity of the WTC catalyst was attributed to the presence of Lewis acidic and basic sites, CaO/CaCO3, MgO, -COOH/OH, and -NH, which are capable of activating the CO2 molecule. Further, the developed catalytic system (AWTC-2a-400/KI) demonstrated superior catalyst versatility for various epoxides under optimized conditions. Moreover, AWTC-2a-400 showed good stability and reusability. Importantly, all reactions were conducted on a gram scale, and the proposed catalyst was effective, which might be favorable for future industrial applications.

The Effects of Propylene oxide Fumigation on the Mortality of Plodia interpunctella (Hubner) (Lepidoptera: Pyralidae)

This study was carried out in 2014-2015 at Kahramanmaraş Sütçü İmam University, Faculty of Agriculture, Department of Plant Protection, Entomology Laboratory. This study aims to evaluate the viability of propylene oxide (PPO) as an alternative fumigant to methyl bromide (MeBr) for the efficient control of Plodia interpunctella (Hubner) (Lepidoptera: Pyralidae) and to model the mortality rates of P. interpunctella insects using different regression techniques. The biological effectiveness of PPO was assessed across all life stages of P. interpunctella during a brief exposure period (4 hours) under three conditions: normal atmospheric pressure (PPO alone), low pressure (PPO+Vacuum), and an atmosphere enriched with carbon dioxide (CO2) (PPO+CO2). For all PPO treatments, PPO was directly introduced into the fumigation chamber at seven or more concentrations using different micro-syringes of different volume ranges: 2.5-25 µl l-1, 1.5-45 µl l-1, 1.5-30 µl l-1, and 0.5-15 µl l-1 for eggs, larvae, pupae, and adults, respectively. The results indicate that 100% mortality was observed in eggs at concentrations of 25 µl l-1, 20 µl l-1 and 20 µl l-1; in larvae at concentrations of 45 µl l-1, 30 µl l-1 and 40 µl l-1; in pupae at concentrations of 30 µl l-1, 15 µl l-1 and 25 µl l-1; and in adults at concentrations of 15 µl l-1, 10 µl l-1 and 10 µl l-1 for the PPO alone, PPO+Vacuum, and PPO+CO2 treatments, respectively. The results obtained from the developed regression models for insect mortality reveal that these models generally exhibited a better fit when described by exponential and third-order polynomial functions. In summary, this study indicates that PPO treatments hold significant promise for rapid insect control, particularly in the case of the Indian meal moth, rendering them invaluable for quarantine purposes.

Spatial decoupling of bromide-mediated process boosts propylene oxide electrosynthesis

The electrochemical synthesis of propylene oxide is far from practical application due to the limited performance (including activity, stability, and selectivity). In this work, we spatially decouple the bromide-mediated process to avoid direct contact between the anode and propylene, where bromine is generated at the anode and then transferred into an independent reactor to react with propylene. This strategy effectively prevents the side reactions and eliminates the interference to stability caused by massive alkene input and vigorously stirred electrolytes. As expected, the selectivity for propylene oxide reaches above 99.9% with a remarkable Faradaic efficiency of 91% and stability of 750-h (>30 days). When the electrode area is scaled up to 25 cm2, 262 g of pure propylene oxide is obtained after 50-h continuous electrolysis at 6.25 A. These findings demonstrate that the electrochemical bromohydrin route represents a viable alternative for the manufacture of epoxides.

A comparison between solvent casting and electrospinning methods for the fabrication of HPMC fast-dissolving films: investigation of the physicochemical, mechanical and drug release characteristics

The fast-dissolving film is an innovative dosage form that rapidly delivers the loaded drug upon contact with saliva. Many studies have been conducted on the fabrication of fast-dissolving films using hydroxy propyl methyl cellulose (HPMC) as a common film-forming agent with solvent-casting method or sometimes with electrospinning. However, there is no comparison of these two methods on the physicochemical, mechanical, and drug-release behavior of HPMC films. This paper aims to compare bisoprolol-containing fast-dissolving films composed of HPMC and polyethylene glycol (PEG) as plasticizer constructed by solvent-casting and electrospinning methods. Given the formulation parameters (e.g., plasticizer and polymer concentrations) and process parameters (e.g., tip-to-needle distance, voltage, and feed rate), various solvent-casting films and nanofiber mats were prepared. Films were characterized in terms of disintegration time, folding endurance, thermal behavior (using DSC), crystallin structure (using XRD), drug content, and drug release. The size and morphology of nanofibers were also evaluated by SEM. Solvent-casting film composed of 6% w/v HPMC and 6% v/v PEG400, as well as nanofiber mat composed of 13% w/v HPMC and 3% w/v PEG2000 were successfully constructed. DSC and XRD analysis revealed that the crystalline structure of bisoprolol converted into the amorphous structure in the polymeric films. Nanofibers were smooth and free of beads with a mean size of 0.66 ± 0.19 μm. In terms of flexibility, the nanofiber mats outperformed the solvent-casting films. The disintegration time of the nanofiber mat was less than that of the solvent-casting film (3 s versus 30 s). Besides, nanofibers indicated faster release. The superior performance of nanofiber mats can be attributed to their nanostructure. The results showed that the characteristics of the fast-dissolving films fabricated of HPMC, including disintegration time, release rate, and flexibility could be improved through the electrospinning process.

Microwave-Assisted Hydrothermal Synthesis, Characterization and Catalytic Performance of α-Bi2Mo3O12 in the Selective Oxidation of Propene

Microwave-Assisted Hydrothermal Synthesis, Characterization and Catalytic Performance of α-Bi2Mo3O12 in the Selective Oxidation of Propene

New Insights on Solvent-Induced Changes in Refractivity and Specific Rotation of Poly(propylene oxide) Systems Extracted from Channeled Spectra.

Investigation of chiroptical polymers in the solution phase is paramount for designing supramolecular architectures for photonic or biomedical devices. This work is devoted to the case study of poly(propylene oxide) (PPO) optical activity in several solvents: benzonitrile, carbon disulfide, chloroform, ethyl acetate, and p-dioxane. To attain information on the interactions in these systems, rheological testing was undertaken, showing distinct variations of the rheological parameters as a function of the solvent type. These aspects are also reflected in the refractive index dispersive behavior, from which linear and non-linear optical properties are extracted. To determine the circular birefringence and specific rotation of the PPO solutions, the alternative method of the channeled spectra was employed. The spectral data were correlated with the molecular modeling of the PPO structural unit in the selected solvents. Density functional theory (DFT) computational data indicated that the torsional potential energy-related to the O1-C2-C3-O4 dihedral angle from the polymer repeating unit-was hindered in solvation environments characterized by high polarity and the ability to interact via hydrogen bonding. This was in agreement with the optical characterization of the samples, which indicated a lower circular birefringence and specific rotation for the solutions of PPO in ethyl acetate and p-dioxane. Also, the shape of optical rotatory dispersion curves was slightly modified for PPO in these solvents compared with the other ones.

Modulation mechanism of Mn-O strength in α-MnO2 catalyst for high-efficiency catalytic combustion of propane

The cleavage of C-H with high energy impedes the catalytic combustion of propane. Herein, α-MnO2 with modulation of Mn-O strength by changing the calcination temperature was applied in propane catalytic combustion. α-MnO2 calcinated at 350 °C (α-MnO2-350) exhibited superior performance (T20=150 °C, T90= 220 °C) in propane oxidation due to the synergistic effect of oxygen vacancies (OVs) and Lewis acidity. Density functional theory (DFT) calculations revealed that the lowest o-vacancy formation energy on α-MnO2-350 (Evo=0.74 eV) with its lowest Mn-O strength prompted the existence of abundant OVs and propane oxidation. Moreover, the highest Lewis acidity in α-MnO2-350 displayed the strongest propane adsorption, promoting the activation of C-H. The mineralization of propane on α-MnO2-350 dropped steeply after 68 h while could recover to 90 % in long-term water vapor stability test owing to the H2O adsorbed at OVs and the carbonaceous intermediates adsorbed at the Lewis acid sites.

Manganese supported on Sr-induced AlO4 and AlO6 catalyst for complete oxidation of propene: effect of preparation methods

Manganese supported on Sr-induced AlO4 and AlO6 catalyst for complete oxidation of propene: effect of preparation methods

Preparation of Non-Isocyanate Polyurethanes from Mixed Cyclic-Carbonated Compounds: Soybean Oil and CO2-Based Poly(ether carbonate).

This study presents the synthesis and characterization of non-isocyanate polyurethanes (NIPU) derived from the copolymerization of cyclic-carbonated soybean oil (CSBO) and cyclic carbonate (CC)-terminated poly(ether carbonate) (RCC). Using a double-metal cyanide catalyst, poly(ether carbonate) polyol was first synthesized through the copolymerization of carbon dioxide and propylene oxide. The terminal hydroxyl group was then subjected to a substitution reaction with a five-membered CC group using glycerol-1,2-carbonate and oxalyl chloride, yielding RCC. Attempts to prepare NIPU solely using RCC and diamine were unsuccessful, possibly due to the low CC functionality and the aminolysis of RCC's linear carbonate repeating units. However, when combined with CSBO, solid NIPUs were successfully obtained, exhibiting good thermal stability along with enhanced mechanical properties compared to conventional CSBO-based NIPU formulations. Overall, this study underscores the potential of leveraging renewable resources and carbon capture technologies to develop sustainable NIPUs with tailored properties, thereby expanding their range of applications.

CO in situ directed highly efficient CrOx@silicalite-1 for propane oxidation dehydrogenation by CO2

The propane oxidation dehydrogenation assisted by CO2 (CO2-ODHP) is currently a hot research topic, not only to meet growing demand of propylene but also to favor the CO2 neutralization. In present work, a series of CrOx@S1-n-1.0 with different Cr contents (n= 2.2, 3.6 and 4.5 wt%) is synthesized based on a small gas molecule directing synthesis strategy, wherein the gaseous CO of 1.0 MPa was in situ introduced in the synthesis system to regulate the interaction and dispersion of CrOx over silicalite-1 (S1) support. The characterization results of XRD, XPS, H2-TPR, and Raman indicate that the CO can affect the oxidation state and dispersion of Cr species. As observed, the Cr species were highly dispersed over CrOx@S1–3.6 %-1.0 (in the form of Cr6+ valance state), which however would aggregate to generate Cr2O3 nanoparticles over the CrOx@S1–3.6 %-0a prepared by impregnation method in absence of CO. The activity measurement indicates that the CrOx@S1–3.6 %-1.0 possesses the highest activity by displaying an average propane conversion of 50.4 % and CO2 conversion of 23.6 % at 600 °C, which surpasses most of the literature reports. The CO2-ODHP reaction mechanism was further investigated by in situ DRIFTS, which indicates that dissociated H of propane can react with CO2 to form formate (-COOH), in turn further reacts with H to produce byproducts CO and H2O, and the formate species can also react with the CrO3 active site to form bicarbonate species (HCO-3). Generally, present work has proposed a small gas molecule directing strategy to adjust the dispersions and chemical states of the loaded guest meals over catalytic support. The study of present work would contribute to other highly efficient catalyst design.

Selective dissolution of micro-spherical Ca-Mn mixed oxides for efficient propane oxidation

The improvement of catalytic efficiency is of great significance to the removal of volatile organic compounds (VOCs), a class of key air pollutants leading to ground-level ozone pollution. Herein, a series of micro-spherical Ca-Mn mixed oxides (CaxMnyOz), namely CaMn3O6, Ca2Mn3O8 and CaMnO3, were prepared by a two-step precipitation method, and defects were constructed on which by selective dissolution to enhance the low-temperature catalytic performance in the oxidation of propane (C3H8) as a representative short-chain alkane VOCs. The synthesized CaxMnyOz oxides demonstrated drastically different response to the dissolution modification initiated by acid treatment. Specifically, after acid dissolution, while CaMn3O6 and Ca2Mn3O8 maintained largely their original structures, the perovskite-type CaMnO3 underwent lattice rearrangement and was transformed into γ-MnO2-like product with only a tiny amount of Ca. In C3H8 oxidation, the catalytic performance of CaMnO3 was significantly improved after selective dissolution, as indicated by a significant decrease of T90, i.e. the temperature to achieve 90% C3H8 conversion, from 455 °C to 240 °C. Mechanistic investigation by in-depth X-ray photoelectron spectroscopy studies revealed that selective dissolution led to higher Mn4+ concentrations and more oxygen vacancies on the oxide surfaces, thus facilitated electron transfer and O2 activation in C3H8 oxidation reactions. This study paves a new path for the design of cost-effective oxide catalysts toward the abatement of short-chain alkane VOCs.