The application of Sn-Bi series solder is limited due to the brittleness of Bi phase. Sn-20Bi solder with less Bi element content has great research prospects, but it needs modification to make it a substitute for traditional Sn-Pb solder. In this article, we mixed graphene nanosheets with nanometer Sn powder by means of ultrasonic oscillation, and Sn-20Bi-qGNS (q = 0.01, 0.02, 0.04, 0.06, and 0.1 wt.%) solder alloys were prepared by the melt-casting method. The effects of graphene nanosheets (GNSs) on the microstructure, physical properties, mechanical properties, and corrosion resistance of solder alloys were investigated. Scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were used to determine the microstructural morphology and composition. The results showed that the melting point, density, and wettability of the solder decreased slightly with the addition of GNSs. The addition of GNSs as a second phase refined the solder structure and improved the tensile strength of the molten Sn-20Bi composite solder to 99.6 MPa, while elongation decreased with the addition of GNSs. Furthermore, GNSs prevented the MC Sn-20Bi-qGNSs/Cu intermetallic compound layers' growth by interfering with atomic diffusion and grain boundary movement. In addition, the addition of 0.02 wt.% GNSs enhanced the shear strength of MC Sn-20Bi solder joints to 46.3 MPa. The electrochemical experimental results show that the surface corrosion products of MC Sn-20Bi-qGNSs under 3.5% NaCl solution were Sn3O(OH)2Cl2, with MC Sn-20Bi-0.01GNSs exhibiting the best corrosion resistance.
Read full abstract7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access