Bulk Heterojunction Organic Solar Cells Research Articles

Advancing Integration of Direct C-H Arylation-Derived Star-Shaped Oligomers as Second Acceptors for Ternary Organic Solar Cells.

Organic solar cells (OSCs) could benefit from the ternary bulk heterojunction (BHJ), a method that allows for fine-tuning of light capture, cascade energy levels, and film shape, in order to increase their power conversion efficiency (PCE). In this work, the third components of PM6:Y6 and PM6:BTP-eC9 BHJs are a set of four star-shaped unfused ring electron acceptors (SSUFREAs), i.e., BD-IC, BFD-IC, BD-2FIC, and BFD-2FIC, that are facilely synthesized by direct C-H arylation. The four SSUFREAs all show complete complementary absorption with PM6, Y6, and BTP-eC9, which facilitates light harvesting and exciton collection. When BFD-2FIC is added as a third component, the PCEs of PM6:Y6 and PM6:BTP-eC9 binary BHJs are able to be improved from 15.31% to 16.85%, and from 16.23% to 17.23%, respectively, showing that BFD-2FIC is useful for most effective ternary OSCs in general, and increasing short circuit current (JSC) and better film morphology are two additional benefits. The ternary PM6:Y6:BFD-2FIC exhibits a 9.7% percentage of increase in PCE compared to the PM6:Y6 binary BHJ, which is one of the highest percentage increases among the reported ternary BHJs, showing the huge potential of BFD-2FIC for ternary BHJ OSCs.

Tactic of A−D−A scheme organic photocatalyst with broad spectral feature of absorption enables photocatalytic performance improvement

Breakthrough in organic pollutant photodegradation is achieved by linking the photocatalysis technology with the excellent photovoltaic nature of bulk heterojunction organic solar cell (BHJ-OSC) active layers. The first pure organic photocatalytic system built to degrade methylene blue (MB)-laden water by associating biochar supporter with active layers, fabricating a subset of organic photocatalysts, it is the first result of A−D−A scheme to date. The champion catalyst C-PM6:TPA-PDI:PIID-ClBF with excellent wide absorption spectra and fine tunable energy level exhibits greater potential in solar harvesting and prolonging charge lifetime, as well as high reusability and no insoluble residuals after treatment. As a result, this strategy both benefits the production of reactive oxygen species and eliminates concerns regarding insoluble residuals, subtly coping with the common disadvantages of most existing photocatalysts. The C-PM6:TPA-PDI:PIID-ClBF successfully degraded MB with a remarkable efficiency of 100 % achieved in 12 min, while also can maintain this high efficiency for up to 100 cycles, as long as the active materials remain active. These findings step forward in developing photocatalysts that are environmentally friendly and affordable, elucidating significant implications of advancing series of BHJ-OSCs-like photocatalysts for the removal of organic pollutants.

Modulation of Phase Separation Morphology by Configuration Engineering in Bulk Heterojunction Organic Solar Cells

For bulk‐heterojunction organic solar cells (OSCs), molecular structure design to control molecular stacking is crucial to obtain ideally phase‐separated morphology and high device performance. Herein, the investigation focuses on two polythiophene‐quinoxaline (PTQ) derivatives (PTQ8 and PTQ10) blended with Y6, utilizing coarse‐grained molecular dynamics simulations based on the Lennard–Jones static potential (LJSP) method. The study reveals that the diminished photovoltaic efficiencies of PTQ8:Y6 blends, compared to PTQ10:Y6 blends, are not solely attributed to reduced driving forces. The introduction of fluorine‐substituted sites in the thiophene group of PTQ polymer is identified as a significant factor. This alteration causes PTQ polymers in PTQ8:Y6 blends to coil, compromising the crystalline structure. PTQ8's bifluorine group induces a repulsive effect on the quinoxaline group, leading to a coiled‐chain structure that hinders chain stacking. Conversely, PTQ10 exhibits a straighter chain conformation. Additionally, PTQ8's high solubility in chloroform prevents effective aggregation, further impeding suitable morphology formation. Coarse‐grained simulations employing LJSP prove effective in precisely exploring the morphology of OSCs, offering crucial insights for materials in this field.

Correction to [Thermally‐Induced Degradation in PM6:Y6‐Based Bulk Heterojunction Organic Solar Cells]

Correction to [Thermally‐Induced Degradation in PM6:Y6‐Based Bulk Heterojunction Organic Solar Cells]

A simulation of the photoconversion efficiency of P3HT:PCBM bulk heterojunction: An insight on the charge collection efficiency

In organic bulk heterojunction solar cells, the internal quantum efficiency can be considered as the product of the absorption efficiency, the exciton diffusion efficiency, the charge transfer efficiency, and the charge collection efficiency. In previous studies, it has been reported that charge transfer and charge collection is very high in these solar cells, approaching 100 %. With a Monte Carlo simulation approach that considers the hopping of charges within the two materials of the heterojunctions, it is highlighted that an estimate of the charge collection efficiency can be evaluated considering that a certain number of charges do not reach the electrodes because of the random arrangement of the two materials in the heterojunction. The case of P3HT:PCBM (1:1 ratio) has been analyzed in this study.

Chemisorption-Induced Robust and Homogeneous Tungsten Disulfide Interlayer Enables Stable PEDOT-Free Organic Solar Cells with Over 19% Efficiency.

Construction of a high-quality charge transport layer (CTL) with intimate contact with the substrate via tailored interface engineering is crucial to increase the overall charge transfer kinetics and stability for a bulk-heterojunction (BHJ) organic solar cell (OSC). Here, we demonstrate a surface chemistry strategy to achieve a homogeneous composite hole transport layer (C-HTL) with robust substrate contact by self-assembling two-dimensional tungsten disulfide (WS2) nanosheets on a thin molybdenum oxide (MoO3) film-evaporated indium tin oxide (ITO) substrate. It is found that over such a well-defined C-HTL, WS2 is homogeneously tethered on the ITO/MoO3 substrate stemming from the strong electronic coupling interaction between the building blocks, which enables a favorable interfacial configuration in terms of uniformity. As a result, the D18:L8-BO-based OSC with C-HTL exhibits a power conversion efficiency (PCE) of 19.23%, an 11% improvement over the WS2-based control device, and the highest efficiency among single-junction PEDOT-free binary BHJ OSCs.

Correlating the Photovoltaic Performance and Stability of the All-Small-Molecule Organic Solar Cells to Their Intermixed Phases Determined by Concentration-Dependent Ultraviolet-Visible Absorption Spectroscopy.

In addition to the donor-acceptor nano phases, the intermixed phase within the organic blends is crucial for the photovoltaic performance and stability of the bulk-heterojunction organic solar cells (OSCs). Here, the intermixed phase of a representative M-PhS:BTP-eC9 all-small-molecule organic solar cell was investigated by a concentration-dependent ultraviolet-visible (UV-vis) absorption spectroscopy method, where a shift of the absorption maximum wavelength was measured for the acceptor component with the increase of the acceptor concentration. The blend ratios of the acceptor to the donor in the intermixed phase, corresponding to the critical concentration for the formation of the acceptor nanophase (CAP), were determined to be 0.35, 0.20, and 0.15 for the as-cast, thermal annealing (TA), and the combined TA and solvent vapor annealing films. These results indicated that M-PhS and BTP-eC9 are kinetically well intermixed during spin coating, whereas TA and the following solvent annealing promote the crystallization of BTP-eC9 molecules out of the intermixed phase. The photovoltaic performance of the M-PhS:BTP-eC9 cells with different blend ratios was investigated. The formation of the BTP-eC9 nano phase in the blend film leads to stable VOC and fast increased JSC, which can be understood by the reduction of bimolecular charge recombination and the formation of electron transporting pathways within the photoactive layer. Similarly, the critical concentration for the formation of the donor phase was estimated to be 0.15 by measuring the stabilized VOC and increased JSC values of the cells with different donor blending ratios. More importantly, after a fast "burn-in" thermal degradation, the M-PhS:BTP-eC9 cell showed excellent thermal stability aging at 85 °C for over 1128 h, which is in good accordance with the unchanged intermixed phases measured by the UV-vis spectra of the annealed films. The current work demonstrates the feasibility of the spectroscopy method to investigate the intermixed phases for organic bulk-heterojunction solar cells and proves that all-small-molecule solar cells can be intrinsically very stable.

Exploring photoexcited spin states for fullerene-derivatives based organic bulk heterojunction solar cells using magneto-photocurrent

Fullerene-derivatives based bulk heterojunctions hold an exceptionally important role on the roadmap of highly efficient organic solar cells (OSCs). In recent years, the utilization of the non-fused ring acceptors based OSCs has further improved photovoltaic power conversion efficiencies. Among these, one of the fundamental issues is to explore and to understand the spin-related polaron dissociation at charge transfer states because they act as the central unit for the photovoltaic action. It is also eagerly important to quantify some internal fields, such as hyperfine fields and the spin–orbit coupling. The aim of the work is to develop a method for unraveling the photoexcited spin states, particularly for the fullerene-derivative based OSC. Furthermore, it helps to elucidate a long-standing issue regarding the relatively high production of photocurrent for the P3HT:PC71BM system, which is indeed contrary to its counterpart the P3HT:PC61BM system. Their corresponding Jablonski diagrams have been determined in order to understand interior spin dynamics. The method of the study offers an alternative route for an understanding of device performance from the spin-related aspect.

The role of interfacial donor–acceptor percolation in efficient and stable all-polymer solar cells

Polymerization of Y6-type acceptor molecules leads to bulk-heterojunction organic solar cells with both high power-conversion efficiency and device stability, but the underlying mechanism remains unclear. Here we show that the exciton recombination dynamics of polymerized Y6-type acceptors (Y6-PAs) strongly depends on the degree of aggregation. While the fast exciton recombination rate in aggregated Y6-PA competes with electron-hole separation at the donor–acceptor (D–A) interface, the much-suppressed exciton recombination rate in dispersed Y6-PA is sufficient to allow efficient free charge generation. Indeed, our experimental results and theoretical simulations reveal that Y6-PAs have larger miscibility with the donor polymer than Y6-type small molecular acceptors, leading to D–A percolation that effectively prevents the formation of Y6-PA aggregates at the interface. Besides enabling high charge generation efficiency, the interfacial D–A percolation also improves the thermodynamic stability of the blend morphology, as evident by the reduced device “burn-in” loss upon solar illumination.

A Three-Dimensional Non-Fullerene Acceptor with Contorted Hexabenzocoronene and Perylenediimide for Organic Solar Cells.

Although fullerene derivatives such as [6,6]-phenyl-C61/C71-butyric acid methyl ester (PC61BM/PC71BM) have dominated the the photoactive acceptor materials in bulk heterojunction organic solar cells (OSCs) for decades, they have several drawbacks such as weak absorption, limited structural tunability, prone to aggregation, and high costs of production. Constructing non-fullerene small molecules with three-dimensional (3D) molecular geometry is one of the strategies to replace fullerenes in OSCs. In this study, a 3D molecule, contorted hexa-cata-hexabenzocoronene tetra perylenediimide (HBC-4-PDI), was designed and synthesized. HBC-4-PDI shows a wide and strong light absorption in the whole UV-vis region as well as suitable energy levels as an acceptor for OSCs. More importantly, the 3D construction effectively reduced the self-aggregation of c-HBC, leading to an appropriate scale phase separation of the blend film morphology in OSCs. A preliminary power conversion efficiency of 2.70 % with a champion open-circuit voltage of 1.06 V was obtained in OSCs with HBC-4-PDI as the acceptor, which was the highest among the previously reported OSCs based on c-HBC derivatives. The results indicated that HBC-4-PDI may serve as a good non-fullerene acceptor for OSCs.

Suppressing Exciton‐Vibration Coupling to Prolong Exciton Lifetime of Nonfullerene Acceptors Enables High‐Efficiency Organic Solar Cells

AbstractThe limited exciton lifetime (τ, generally <1 ns) leads to short exciton diffusion length (LD) of organic semiconductors, which is the bottleneck issue impeding the further improvement of power conversion efficiencies (PCEs) for organic solar cells (OSCs). However, efficient strategies to prolong intrinsic τ are rare and vague. Herein, we propose a facile method to efficiently reduce vibrational frequency of molecular skeleton and suppress exciton‐vibration coupling to decrease non‐radiative decay rate and thus prolong τ via deuterating nonfullerene acceptors. The τ remarkably increases from 0.90 ns (non‐deuterated L8‐BO) to 1.35 ns (deuterated L8‐BO‐D), which is the record for organic photovoltaic materials. Besides, the inhibited molecular vibration improves molecular planarity of L8‐BO‐D for enhanced exciton diffusion coefficient. Consequently, the LD increases from 7.9 nm (L8‐BO) to 10.7 nm (L8‐BO‐D). The prolonged LD of L8‐BO‐D enables PM6 : L8‐BO‐D‐based bulk heterojunction OSCs to acquire higher PCEs of 18.5 % with more efficient exciton dissociation and weaker charge carrier recombination than PM6 : L8‐BO‐based counterparts. Moreover, benefiting from the prolonged LD, D18/L8‐BO‐D‐based pseudo‐planar heterojunction OSCs achieve an impressive PCE of 19.3 %, which is among the highest values. This work provides an efficient strategy to increase the τ and thus LD of organic semiconductors, boosting PCEs of OSCs.

Suppressing Exciton-Vibration Coupling to Prolong Exciton Lifetime of Nonfullerene Acceptors Enables High-Efficiency Organic Solar Cells.

The limited exciton lifetime (τ, generally <1 ns) leads to short exciton diffusion length (LD ) of organic semiconductors, which is the bottleneck issue impeding the further improvement of power conversion efficiencies (PCEs) for organic solar cells (OSCs). However, efficient strategies to prolong intrinsic τ are rare and vague. Herein, we propose a facile method to efficiently reduce vibrational frequency of molecular skeleton and suppress exciton-vibration coupling to decrease non-radiative decay rate and thus prolong τ via deuterating nonfullerene acceptors. The τ remarkably increases from 0.90 ns (non-deuterated L8-BO) to 1.35 ns (deuterated L8-BO-D), which is the record for organic photovoltaic materials. Besides, the inhibited molecular vibration improves molecular planarity of L8-BO-D for enhanced exciton diffusion coefficient. Consequently, the LD increases from 7.9 nm (L8-BO) to 10.7 nm (L8-BO-D). The prolonged LD of L8-BO-D enables PM6 : L8-BO-D-based bulk heterojunction OSCs to acquire higher PCEs of 18.5 % with more efficient exciton dissociation and weaker charge carrier recombination than PM6 : L8-BO-based counterparts. Moreover, benefiting from the prolonged LD , D18/L8-BO-D-based pseudo-planar heterojunction OSCs achieve an impressive PCE of 19.3 %, which is among the highest values. This work provides an efficient strategy to increase the τ and thus LD of organic semiconductors, boosting PCEs of OSCs.

Density Functional Theory Simulation of Dithienothiophen[3,2-b]-pyrrolobenzothiadiazole-Based Organic Solar Cells

We have simulated the effect of changing the end groups in BTP core with five organic units of 1,3-Indandione (IN), 2-thioxothiazolidin-4-one (Rhodanine), propanedinitrile (Malononitrile), (2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) (CPTCN) and 2-(3-oxo-2,3-dihydroinden-1-ylidene (IC), and two halogenated units of (4F) IC and (4Cl) IC on the optical and photovoltaic properties of the BTP DA’D core molecular unit. Thus modified, seven molecular structures are considered and their optical properties, including HOMO and LUMO energies and absorption spectra are simulated in this paper. On the basis of HOMO and LUMO energies, it is found that two of the seven molecules, BTP-IN and BTP-Rhodanine, can act as donors and the other four, BTP-(4F) IC, BTP-(4Cl) IC, BTP-CPTCN and BTP-IC, as acceptors in designing bulk heterojunction (BHJ) organic solar cells (OSCs). Using these combinations of donors and acceptors in the active layer, eight BHJ OSCs, such as BTP-IN: BTP-(4F) IC, BTP-IN: BTP-(4Cl) IC, BTP-IN: BTP-CPTCN, BTP-IN: BTP-IC, BTP-Rhodanine: BTP-(4F) IC, BTP-Rhodanine: BTP-(4Cl) IC, BTP-Rhodanine: BTP-CPTCN and BTP-Rhodanine: BTP-IC, are designed, and their photovoltaic performance is simulated. The photovoltaic parameters Jsc, Voc and FF for all eight BHJ OSCs and their power conversion efficiency (PCE) are simulated. It is found that the BHJ OSC of the BTP-IN: BTP-CPTCN donor–acceptor blend gives the highest PCE (14.73%) and that of BTP-Rhodanine: BTP-(4F) IC gives the lowest PCE (12.07%). These results offer promising prospects for the fabrication of high-efficiency BHJ OSCs with the blend of both donor and acceptor based on the same core structure.

Enhancing performance and scalability of HTL-free organic solar cells with keggin polyoxometalates-type additive

Interfacial layers play a crucial role in enhancing the performances and stabilities of organic solar cells (OSCs). Despite achieving high efficiencies from OSCs, the challenges associated with large-area manufacturing and the need for nanoscale uniformity during coating have hindered the large-scale production of these devices. To address these issues, we propose the concept of hole transport layer (HTL)-free OSCs to simplify the fabrication processes and improve the efficiency of production. In this study, we explore the potential of phosphotungstic acid (PTA), a Keggin polyoxometalate, both as a promising HTL and as an additive in HTL-free OSCs to enhance device performances and scalabilities in cell-to-module OSCs. Remarkably, incorporating PTA as an annealing-free HTL and as an additive in the photoactive layer (PM6:Y6:PC71BM) significantly increases power conversion efficiency (PCE) up to 17.28 % and 16.33 %, respectively, with respect to that of the reference device with PEDOT:PSS (15.88 %). We successfully fabricate a large-area OSC module, exhibiting an impressive PCE of 15.18 % and an active area of 54 cm2, achieving approximately 85 % of the effectiveness of small-area OSCs. The improved performance is attributed to the enhanced transmittance, excellent carrier-dynamic capacity, suppressed carrier recombination, and reduced trap-states in the ternary bulk-heterojunction OSCs. This study demonstrates the promising versatility of PTA for application in OSCs, offering potential enhancements in device performance and scalability for future applications.

Regulation of photoinduced charge transfer in all-small-molecule organic solar cells through the synergistic effect of external electric field and solvent

The donor (BTR-Cl) and acceptor (BTP-FCl-FCl) have well-defined small molecule properties and excellent repeatability, and they can form charge transfer complexes with a wide spectral absorption range. Using density functional theory (DFT), we simulate the photoinduced charge transfer of bulk-heterojunction (BHJ) organic solar cell (OSC) materials modulated by the external electric field (Fext) at the microscopic level. The excited-state properties, reorganization energy (λ), Gibbs free energy (ΔG), electron coupling matrix elements (VDA) and intermolecular charge transfer (ICT) rate dependent on Fext are systematically analyzed. The results manifest that Fext has apparent positive regulation on the charge separation rate (KCS), and VDA is the main factor affecting KCS. The synergistic effect of solvent and Fext on charge transfer process is further investigated. It is found that the charge transfer rate in solvent is lower than that in solvent-free conditions, and the charge transfer rate in chlorobenzene (CB) solvent does not change significantly under the control of Fext. At the same time, Fext has a positive effect on the charge transfer rate in tetrahydrofuran (THF) solvent. Considering the charge transfer rate under different solvents and Fext intensities, it is found that the solvent and Fext play an essential role in determining the KCS and charge recombination rate (KCR).

Hybrid Steroid‐[60]Fullerene as n‐Type Material for Organic Photovoltaics

AbstractFullerene derivatives have been used as electron acceptor and transport materials in organic photovoltaics as well as in perovskite solar cells. Among them, [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC61BM) has been one of the most widely used, in combination with poly‐3‐hexylthiophene (P3HT) as an electron donor semiconducting polymer, for the fabrication of organic bulk heterojunction solar cells (BHJ‐OSC). In this work, a steroid‐fullerene hybrid was synthesized through the Bingel–Hirsch reaction to compare its properties with PC61BM as the reference structure. Different spectroscopic techniques were employed to characterize the new fullerene derivative, namely 1D and 2D nuclear magnetic resonance (NMR), Fourier Transform Infrared Spectroscopy (FTIR), and high‐resolution mass spectrometry (HRMS). In addition, thermogravimetric analysis (TGA), and cyclic voltammetry were also performed. The characterization was completed by transmission electron microscopy (TEM), which explore the hybrid‘s morphology, where the presence of the steroid moiety increases the solubility of the fullerene material. DFT/PBE−D3(BJ)/6‐311G(d,p) calculations for both the steroid‐fullerene hybrid and PC61BM allowed to obtain geometry optimizations and electronic structure data. A comparative study to analyze the nature of the electronic properties of the synthesized steroid‐[60]fullerene hybrid and PC61BM with an oligomer of ten thiophene units, used in the active layer of organic solar cells, was carried out. Electron density maps using the [CIS|CNDOL/21] approach illustrate the photoexcitation of the donor followed by an electron‐charge transfer to the acceptor fullerene.

Selectively Modulating Componential Morphologies of Bulk Heterojunction Organic Solar Cells.

Achieving precise control over the nanoscale morphology of bulk heterojunction films presents a significant challenge for the conventional post-treatments employed in organic solar cells (OSCs). In this study, a near-infrared photon-assisted annealing (NPA) strategy is developed for fabricating high-performance OSCs under mild processing conditions. It is revealed a top NIR light illumination, together with the bottom heating, enables the selective tuning of the molecular arrangement and assembly of narrow bandgap acceptors in polymer networks to achieve optimal morphologies, as well as the acceptor-rich top surface of active layers. The derived OSCs exhibit a remarkable power conversion efficiency (PCE) of 19.25%, representing one of the highest PCEs for the reported binary OSCs so far. Moreover, via the NPA strategy, it has succeeded in accessing top-illuminated flexible OSCs using thermolabile polyethylene terephthalate from mineral water bottles, displaying excellent mechanical stabilities. Overall, this work will hold the potential to develop organic solar cells under mild processing with various substrates.

Fine-Tuned Active Layer Morphology for Bulk Heterojunction Organic Solar Cells with Indene-C60 Bisadduct as a Third Component.

Active layer morphology is of vital importance for the photovoltaic performance of organic solar cells (OSCs). As fullerene derivatives and nonfullerene acceptors are highly complementary in many aspects, fullerene derivatives as a third component in nonfullerene OSCs could tune the blend morphology and improve the power conversion efficiency (PCE). Relative to PCBM, the indene-C60 bisadduct (IC60BA) as the third component in nonfullerene binary OSCs has not been extensively studied. Here, the fullerene derivative IC60BA is introduced into the PTZ1:IDIC blend system to finely tune the active layer morphology. Although the addition of IC60BA reduced the film absorption in the visible region and weakened the crystallinity, the more symmetric charge transport property, smaller domain size, and higher domain purity led to improved photovoltaic performance. This study indicates that IC60BA is a promising candidate to finely tune the morphology for achieving highly efficient OSCs.

Enhancing the Efficiency of PM6:Y6 Bulk-Heterojunction Organic Solar Cells through SCAPS Simulation Optimization

Organic solar cell (OSC) is becoming a point of attraction in the solar cell industry due to their benefits, such as light weight, flexibility, low cost, semi-transparency, and easy fabricating methods. By replacing fullerene with non-fullerene acceptors like Y6, ITIC, PCBM, and ICBA, the power conversion efficiency (PCE) of OSCs has surpassed the 15% benchmark. Here, the proposed OSC structure includes an ITO front contact electrode, SnO2 electron transport layer (ETL), PM6:Y6 active layer, Cu2O hole transport layer (HTL), and Ag back contact electrode. Systematic numerical simulation of the above proposed OSC has been performed using a solar cell capacitance simulator (SCAPS)-1D (Version 3.3.09). The device improvement analysis has been carried out in steps by analyzing the ETL-HTL effect, selecting the optimum thickness of the active layer, and the optimum value of defect density. In the first step, a PCE of 24.60% was achieved, followed by an improvement to 27.55% with the optimized defect density value. The best PCE of 27.74% was achieved in the third step with an optimized active layer thickness, leading to high fill factor (80.56%), open-circuit voltage (0.9461 V), and short-circuit current density (36.188 mA/cm2). These simulated results promote an in-depth understanding of the optical and electronic properties of PM6:Y6 blend-based OSC and show the potential of NFA-BHJ OSCs as promising candidates for solar cells in the near future.

The critical role of temperature-dependent mobilities in determining the open-circuit voltage of bulk-heterojunction organic solar cells

While solution-processed bulk-heterojunction organic solar cells (OSCs) continue to attract attention as their efficiencies approach 20%, the physical origin of the non-radiative energy loss in OSCs remains under debate. Understanding the temperature dependence of open-circuit voltage (VOC) is thus important because it provides unique insights into the origin of energy loss. Herein, we simulate the VOC vs T relation of PTB7-Th:PC71BM bulk-heterojunction OSCs within the range of 160–295 K by incorporating experimentally measured temperature-dependent mobilities into the drift-diffusion model, assuming bimolecular recombination as the primary recombination mechanism. Significantly, we find that the temperature dependence of VOC can only be correctly reproduced by the model when the temperature dependence of the carrier mobilities is taken into account. The effect of the Langevin reduction coefficient on the temperature dependence of VOC is also investigated.