Audio-frequency Magnetotellurics Research Articles

Distributed wide-field electromagnetic method for coal mining goaf detection in a complex urban environment: A case study in Jinan, China

Urban expansion has resulted in many proposed projects located over coal mining zones, which has highlighted the importance of detecting the spatial scope and water abundance of goafs before the commencement of construction work. Although electromagnetic (EM) methods have proven effective for goaf detection, their applications in intensely noisy and urbanized environments remain limited. To address this challenge, we evaluate an investigation of a coal mining goaf in Jinan, China, using the distributed wide-field EM (DWFEM) method. A third-order [Formula: see text] sequence pseudorandom signal with 39 survey frequencies is transmitted to achieve long-time data acquisition at each station. Unlike the controlled-source audio-frequency magnetotellurics method, the DWFEM records only the electric field [Formula: see text] component. The synthetic model tests and field data demonstrate the consistency of the [Formula: see text] apparent resistivity and the Cagniard resistivity in the far field. The long-time acquisition and 1C recording greatly improve data quality and exploration efficiency. We also use an all-angle resistivity calculation formula and an electrode layout method parallel to the wire source to obtain electrical connections in different directions. The DWFEM inversion results are obtained using the 1D Gauss-Newton iterative method under a plane-wave assumption. By interpolating the data from different measurement stations, we image resistivity depth profiles and obtain 3D subsurface electrical data for the subsurface from 0 to 1000 m. We interpret the obtained profiles with geologic and mining information, revealing two significant water-enriched goaf areas. Validation is performed using seismic data and drill cores. The results significantly enhance our understanding of the characteristics of the coal mine under our project and highlight the applicability of the DWFEM for detecting goafs in complex urban environments.

Denoising CSAMT signals in the time domain based on long short-term memory

Abstract Controlled-source audio frequency magnetotellurics (CSAMT) is an artificial-source electromagnetic technique that partially mitigates the limitations of weak natural-field signals. However, practical field surveys inevitably encounter strong interference, severely affecting signal quality. Traditional methods such as Fourier transformation, which directly computes apparent resistivity from frequency-domain information, are inadequate in this context, so we need alternative denoising approaches. However, research on CSAMT denoising is currently limited. Given the excellent performance of long short-term memory (LSTM) neural networks in the processing of magnetotelluric (MT) data, as demonstrated by previous studies, this paper proposes the use of LSTM to denoise CSAMT signals in the time domain. Unlike traditional denoising methods, we aim to directly extract the target frequency signal from the time-series data for denoising. For MT data, target frequency signals and noise are all mixed together, so noise suppression can only be achieved by identifying noise characteristics in the time series. However, unlike MT data, CSAMT data has an artificial transmitting source, and the frequency of the valid signal is fixed within a time interval. This allows for the direct extraction of target frequency signals without considering the complex characteristics of noise. In this study, we developed a neural network based on bidirectional LSTM to accomplish the task of noise suppression. After conducting both simulated and measured data tests, this method was able to, on average, improve the signal-to-noise ratio (SNR) of CSAMT data by approximately 20 dB and partially address the challenge of denoising when the data's SNR falls below 0 dB.

Detecting and recovering critical mineral resource systems using broadband total-field airborne natural source audio frequency magnetotellurics measurements

Airborne geophysical methods offer a substantial advantage compared to ground-based techniques in exploring territories of different sizes, ranging from entire metallogenic provinces to the deposit scale, including those hosting critical minerals. An airborne method with measurements of natural magnetic field variations, known as audio frequency magnetotellurics (a passive field method), significantly increases the depth of investigation and expands the resistivity detection range compared with some controlled-source primary-field methods. We describe the technical solutions used in an airborne electromagnetic passive system with a mobile sensor of the total magnetic field variations and the stationary sensor of electric field variations, and its applications to recovering the complex geology of hydrothermal-magmatic systems often associated with critical minerals. The system’s ability to explore depths, typically beginning from the near-surface and down to 1–2 km, by recording responses in three orthogonal inductive coils over a broad bandwidth from 22 Hz to 21,000 Hz allows for mapping resistivities across a broad range. This capability is crucial for obtaining more comprehensive exploration models. Field case studies of the natural field system include application in exploring for unconformity uranium mineralization, along with other associated minerals, epithermal gold and polymetallic-bearing structures, and ferromanganese and polymetallic deposits formed in a continental rift valley. An extra case study involving kimberlites was incorporated as a proven example of the natural field system’s capability in conducting near-surface and deep investigations. The case histories illustrate the airborne natural electromagnetic field technology capabilities in recovering geoelectric models and their specific patterns.

Delineation of shallow volcanic structures from audio-frequency magnetotelluric data beneath Ulleung Island, East Sea (Sea of Japan)

As volcanoes are closely related to the living environment of humans, in particular via natural hazards and geothermal energy, scientific studies on volcanic edifice structures are required. Ulleung Island is a Quaternary volcanic island located in the mid-western East Sea (Sea of Japan). In this study, we conducted an audio-frequency magnetotelluric (AMT) survey to image the substructure of the Ulleung volcanic edifice. In addition, the electrical structure was interpreted from the geothermal system perspective, geochemical compositions of volcanic rocks, and the possibility of the presence of a magma reservoir. AMT data were obtained from 25 stations and processed using the remote reference technique. Then, the three-dimensional (3-D) approach was reasonably adopted according to dimensionality analysis. Before conducting the 3-D inversion, the effects on topography and ocean were analyzed using a simplified 3-D synthetic model, because Ulleung Island is surrounded by sea and the topography is undulating. Most AMT stations on Ulleung Island are distorted by topographical and oceanic effects; in particular, oceanic effects are significant at frequencies lower than 10 Hz. The 3-D inversion was conducted with full impedance components and vertical magnetic transfer functions in a frequency range of 10,000–1 Hz. The results show that the Ulleung volcanic edifice is characterized by two layers of electrical structures as follows: near-surface resistive anomalies and an underlying conductive layer. Considering the high geothermal gradient on Ulleung Island, we suggest that the conductive layer of the volcanic edifice is due to hydrothermal alteration of basaltic rocks, with a potential heat source underneath. Based on the geochemical characteristics of the Ulleung volcanic rocks, the possibility of heat transfer from a trachytic magma reservoir within the shallow crustal is suggested. In summary, this study presents a geological interpretation of shallow volcanic structures beneath Ulleung Island and the possibility of an active magma reservoir as a potential heat source for the volcanic edifice.Graphical

Evaluation of rock mass units using a non-invasive geophysical approach

Thorough and accurate assessment of rock mass units is important for development of engineering infrastructures and groundwater resources assessments. Rock mass units are widely evaluated by reliable geomechanical parameters namely rock quality designation (RQD) and rock core index (RCI). Conventionally, these parameters are acquired via an extensive number of geotechnical tests. Such tests, however, suffer efficiency for data coverage, cost, equipment and topographic constrictions, and hence cause ambiguity in geological models for a detailed evaluation of rock mass integrity. Conversely, geophysical surveys offer fast, more user-friendly, less invasive, more cost-effective and less time-consuming approach for geological investigations. The past research confirms a useful link between geophysical and geotechnical parameters. But, none of the past studies provides a suitable and generalized relation between these parameters which can reduce geotechnical model uncertainty mostly caused by inadequate data and subsurface heterogeneity. This paper proposes a meaningful and feasible method to obtain geomechanical parameters using a certain number of drillings and geophysical data of four different sites. Based on electrical resistivity obtained from electrical resistivity tomography (ERT) and controlled-source audio-frequency magneto telluric (CSAMT), this research provides the general and adaptable formulas for geotechnical parameter estimation and reduces geological model uncertainty for more detailed 2D/3D imaging of RQD and RCI covering the whole sites where even no drilling data exists. Thus, the investigated sites are assessed laterally and vertically along each geophysical profile via distinct value ranges of geological parameters for a thorough and reliable evaluation of rock mass units in highly heterogeneous setting. Our research reduces the ambiguity caused by structural heterogeneities and scarce data, fills the gap between inadequate well tests and the true geological models, and gives new insights into the rock mass units for proper engineering design and groundwater exploitation.

Application of audio-frequency magnetotelluric data to cover characterisation – validation against borehole petrophysics in the East Tennant region, Northern Australia

The characterisation of the thickness and geology of cover sequences significantly improves targeting for mineral exploration in buried terrains. Audio-frequency Magnetotelluric (AMT) data is applicable to characterise cover sequences, where their conductivity (inverse resistivity) can be differentiated. We present a regional study from the under-cover East Tennant region in the Northern Territory (Australia) where we have applied deterministic and probabilistic inversion methods to derive 2D and 1D resistivity models. We integrated these models with information of co-located basement penetrating boreholes (lithological and geophysical logs) to ground-truth and validate the models and to improve geophysical interpretations. In the East Tennant region, borehole lithology and wireline logging demonstrate that the modelled AMT response is largely controlled by the mineralogy of the cover and basement rocks. The bulk conductivity is due primarily to bulk mineralogy and the success of using the AMT models to predict cover thickness is shown to be dependent on whether the bulk mineralogy of cover and basement rocks are sufficiently different to provide a detectable conductivity contrast. Our investigation of a range of geological scenarios that differ in thickness, complexity and geology of the cover and basement rocks suggests that in areas where there is sufficient difference in bulk mineralogy and where the stratigraphy is relatively simple, AMT models predict the cover thickness with high certainty. In more complex scenarios interpretation of AMT models may be more ambiguous and requires integration with other data (e.g. drilling, wireline logging, potential field modelling). Overall, we conclude that the application of the method has been validated and the results compare favourably with borehole stratigraphy logs once geological (i.e. bulk mineralogical) complexity is understood. This demonstrates that the method is capable of identifying major litho-stratigraphic units with resistivity contrasts. Our results have assisted with the planning of regional drilling programs and have helped to reduce the uncertainty and risk associated with intersecting targeted stratigraphic units in covered terrains.

Anatomy of the convective geothermal system from geophysical and hydrochemical data: A case study from the Changshou geothermal field, South China

There are abundant low-medium temperature geothermal resources in southern China; however, a lack of research into their properties restricts the utilization of the geothermal energy. To expand the geothermal energy potential in southern China, it is vital to clarify the nonvolcanic geothermal system mechanisms. This study aimed to elucidate the mechanisms for the Changshou geothermal field, as a representative structurally controlled convective geothermal system, by analyzing the geophysical and hydrochemical data. The surface-to-subsurface (400 m depth) electrical resistivity structure of the geothermal field was obtained by 2D inversion of two intersecting controlled-source audio-frequency magnetotellurics and electrical resistivity tomography geophysical profiles. We identified the cap rock, reservoir, and fluid pathways of the geothermal system and verified them via drilling results. The cap was composed of Quaternary sediments and Cretaceous sandstone with moderate resistivity (10–50 Ωm), and the geothermal reservoir and fluid pathways were composed of dolomites and fracture zones with low resistivity (less than 5 Ωm), respectively. The hydrochemical results showed that the geothermal water was of the type HCO3·SO4−Ca·Mg, with low values of total dissolved solids resulting from shallow groundwater mixing. Isotope analyses indicated that the geothermal water was derived from precipitation in the Dahong Mountains, southeast of the geothermal field. The average temperature of the geothermal reservoir, as estimated by chalcedony and K-Mg geothermometers, was 53°C. Based on the geothermal gradient calculation, the circulation depth of the groundwater was 1500 m, with the circulation process driven by heat flows originating deep within the earth. The Changshou geothermal field was identified as a potential source of energy for residential heating in winter, owing to the large flow (2700 m3/d) and high permeability (24.03 m/d) of the geothermal reservoir.

Exploration of geothermal resources using comprehensive electromagnetic method

Geothermal resource is a kind of crucial clean, renewable energy with high potential development and application. However, it involves great exploiting risks since it buried deep beneath the crust of the Earth. The location and depth of geothermal resources can be determined using the geophysical methods. Controlled source audio-frequency magnetotellurics (CSAMT) and transient electromagnetic method (TEM) have relatively high efficiency and robustness. In this paper, a simplified geothermal system resistivity model was established, which allowed TEM and CSAMT to differentiate target faults with various characteristics (resistivity, dip angle and width). Through a comprehensive electromagnetic exploration in Huairen County, Shanxi Province, China as an example, the performance of TEM and CSAMT in determining geothermal resources was evaluated. The results showed that both methods could examine the geoelectrical structures from various perspectives, and the effectiveness of comprehensive electromagnetic method for geothermal resources was presented.

Comprehensive Evaluation of Goaf Range in a Coal Mine with a Complex Terrain through CSAMT and an Activated-Carbon Method for Radon Measurement

Underground goaves were left in many mining areas due to the continuous exploitation of coal resources. These mining areas seriously affect the production safety of the mines and the safety of life and property of the surrounding residents. Enormous safety hazards will be generated if the goaf range is not accurately controlled. In this study, we proposed a method for the detection of goaves in coal mines with a complex terrain by combining controlled source audio-frequency magnetotellurics (CSAMT) and an activated-carbon method for radon measurement. The disadvantage of failing to interpret goaf depth for the activated-carbon method for radon measurement was compensated by the advantage of the capability of goaf-depth sounding for CSAMT. Subsequently, the reference for CSAMT data was provided by the immunity of the activated-carbon method for radon measurement to the influences of terrain, earth electricity, and EMF. On this basis, the proposed method was employed to detect the goaf of Houjiagou Coal Mine in Liulin County, China, and obtained reliable detection results. The feasibility of the comprehensive geophysical prospecting method in the complex terrain was verified and it provides a new reference for the detection method of goaves with other conditions.

Shallow resistivity structure around the 2018 craters of Mt. Motoshirane of Kusatsu-Shirane Volcano, Japan, revealed by audio-frequency magnetotellurics

In 2018, a phreatic eruption occurred at Mt. Motoshirane, a pyroclastic cone group of the Kusatsu-Shirane Volcano in central Japan. The eruption was abrupt, and no signs of volcanic activity have been observed in recent years, in contrast to the other major pyroclastic cone group, Mt. Shirane, which hosts the active crater lake and has endured repeated phreatic eruptions. To understand the mechanism of the eruption at Mt. Motoshirane, information on the shallow hydrothermal system, which is thought to be the source region of phreatic eruptions, is required; however, few studies have been conducted on this particular cone group. In this study, we conducted an audio-frequency magnetotelluric survey in 2020 to reveal the shallow resistivity structure around the 2018 craters. A three-dimensional resistivity structure model showed generally two layers, with high resistivities at shallow depths overlain by low resistivities underneath. The boundary between the layers corresponded to the top boundary of the Neogene basement rocks. These low resistivities were not found beneath the 2018 craters; therefore, part of the Neogene basement rocks could have been lost by the eruption beneath the 2018 craters. This is consistent with the geochemical study on the mineral assemblage of the erupted deposits, which suggested that the explosions reached the depth of the basement.Graphical

Hydrogeological Study in Tongchuan City Using the Audio-Frequency Magnetotelluric Method

Tongchuan City, located in Shaanxi Province, northwest China, has limited groundwater resources. Rational planning and exploitation of groundwater are crucial to the sustainable development of the city, for which investigating the distribution of groundwater is the premise. Traditional resistivity sounding methods are often used to detect groundwater; however, these methods are not applicable in the study area where thick Quaternary loess is extensively distributed. In this study, we arranged five audio-frequency magnetotelluric (AMT) profiles to detect the deep clastic rock groundwater and carbonate karst fissure groundwater in Tongchuan. Firstly, we analyzed the electromagnetic interference (EMI) noises in Tongchuan City, revealing that the main EMI is power frequency interference (PFI). We used the dictionary learning processing technology to suppress the PFI. Secondly, the two-dimensional (2D) nonlinear conjugate gradient method was employed to invert a 2D electrical structure model for the area shallower than 1 km. We analyzed the characteristics of the electrical structure and its geological significance. Lastly, the three-dimensional (3D) electrical structure model of the study area was inverted using the 3D nonlinear conjugate gradient method, and the spatial distribution characteristics of the water-bearing strata were further analyzed. The results show that the PFI in urban environment can be suppressed by the dictionary learning processing technology. In Tongchuan city, the distribution of clastic rock fissure water is controlled by folds and faults, as well as the thickness of sandstone layers, and that of the carbonate karst fissure water is mainly controlled by faults. On this basis, we infer that the water-bearing areas are in the middle east and south of the study area.

HYBRID PARTICLE SWARM OPTIMIZATION AND GREY WOLF OPTIMIZER ALGORITHM FOR CONTROLLED SOURCE AUDIO-FREQUENCY MAGNETOTELLURICS (CSAMT) ONE-DIMENSIONAL INVERSION MODELLING

The Controlled Source Audio-frequency Magnetotellurics (CSAMT) is a geophysical method utilizing artificial electromagnetic signal source to estimate subsurface resistivity structures. One-dimensional (1D) inversion modelling of CSAMT data is non-linear and the solution can be estimated by using global optimization algorithms. Particle Swarm Optimization (PSO) and Grey Wolf Optimizer (GWO) are well-known population-based algorithms having relatively simple mathematical formulation and implementation. Hybridization of PSO and GWO algorithms (called hybrid PSO-GWO) can improve the convergence capability to the global solution. This study applied the hybrid PSO-GWO algorithm for 1D CSAMT inversion modelling. Tests were conducted with synthetic CSAMT data associated with 3-layer, 4-layer and 5-layer earth models to determine the performance of the algorithm. The results show that the hybrid PSO-GWO algorithm has a good performance in obtaining the minimum misfit compared to the original PSO and GWO algorithms. The hybrid PSO-GWO algorithm was also applied to invert CSAMT field data for gold mineralization exploration in the Cibaliung area, Banten Province, Indonesia. The algorithm was able to reconstruct the resistivity model very well which is confirmed by the results from inversion of the data using standard 2D MT inversion software. The model also agrees well with the geological information of the study area.

Audio Magnetotellurics Study of the Geoelectric Structure across the Zhugongtang Giant Lead–Zinc Deposit, NW Guizhou Province, China

Non-invasive geophysical exploration methods a play key role in the exploration of ore deposits. In the present study, the audio-frequency magnetotelluric (AMT) method was applied to metallic mineral exploration. The metallic mineral deposit targeted was the recently discovered super large lead–zinc deposit of the Zhugongtang mining area of Hezhang County in the northwestern Guizhou province in China. The main objectives of this study were to estimate the geoelectric strike and generate geoelectric models that estimate both the depth and distribution of resistivity structures across the deposit. To achieve the objectives, we deployed sixty-one (61) AMT survey sites with an interstation separation of 20 m on a 1280 m survey track perpendicular to the geological strike across the Zhugongtang deposit. We operated in fifty-three (53) frequencies in the range 1–10,400 Hz to record the resistivity distribution of subsurface to a depth of more than 1200 m. The results from the AMT data computations estimated the geoelectric strike that varies between NE285° and NE315°. This range of strikes suggested that structures across the deposit are oriented in the NW–SE direction. Obtained two-dimensional (2D) models elucidated a remarkably low resistivity body (<15 Ωm) at an elevation of less than 1600 m above sea level (>0.50 km depth), thus extending to great depth and were interpreted as lead–zinc mineralization. Furthermore, low resistivity (<63 Ωm) features were imaged both in superficial and deeper depths and interpreted as shale, sandstone, claystone, and silty mudstone units. Dolomite and limestone lithologies were found widely distributed with high resistivity (>1000 Ωm). Bioclastic limestone and dolomite limestone were inferred and characterized by moderate-high resistivity (>250 Ωm) and were not widely distributed. A unit of basalts was found with moderate resistivity (>63 Ωm). In addition, it was also found that regions with high number of faults tend to have low resistivity values compared to regions with a low fault number. In summary, this case study presents the results of applying an AMT approach to explore the conductivity characteristics of structures across the Zhugongtang deposit. The findings may contribute to the literature about this deposit.

Application of Audio Frequency Magnetotelluric Method in the Exploration of Water Conveying Tunnel in Dagouhe Area

Application of Audio Frequency Magnetotelluric Method in the Exploration of Water Conveying Tunnel in Dagouhe Area

An Asymmetric Beamforming Method Based on Arithmetic Phase Difference Weighting in CSAMT

Traditional controlled-source audio-frequency magnetotellurics (CSAMT) radiates symmetric beams using a grounded symmetric dipole (GSD). Only a tiny fraction of radiant energy is taken advantage of during the far-field (Ff) observation due to the low directivity of the GSD. In order to enhance the signal-to-noise ratio (SNR) during the Ff observation, it is necessary to reduce the transceiving distance (TD) or increase the transmitting power (TP), but both methods will cause many problems. Further, when using the tensor method for observation, GSDs in two vertical directions will be employed to radiate energy, and then a series of problems will occur such as an asymmetry of the SNR in two vertical directions if the geological conditions under the two GSDs vary widely. An arithmetic phase difference (APd) weighting asymmetric beamforming method (ABFM) in CSAMT is proposed in this paper, which uses a GSD array instead of a single GSD, and a signal with APd is transmitted to control the wavefront for beam steering. A significant enhancement (about 3 dB) of the SNR will occur by collecting the radiant energy in the region of concern (RoC) using ABFM. The analysis and simulation results demonstrate that under the premise of the same TD and TP, the ABFM has obvious advantages in improving energy utilization in CSAMT. In other words, the APd-weighted ABFM can deal with a complex noise environment in the field better than the traditional method.

Comparative study of a novel arithmetic amplitude-phase weighted beamforming method in vector and tensor CSAMT

Abstract Vector controlled-source audio-frequency magnetotellurics (CSAMT) emits electromagnetic waves with a low directivity coefficient using a grounded horizontal electric dipole (HED). During observations in the far-field region (FfR), only a fraction of radiation energy is used. To improve the signal-to-noise ratio (SNR) in the FfR, it is necessary to increase the power of the transmitter or shorten the transceiver distance, but it will restrict the development of vector CSAMT. Comparatively, the tensor CSAMT uses HEDs in two directions to measure geological bodies in every direction. If the geological conditions of two HEDs are vastly different, it is easy to cause issues, such as an imbalance of the SNR in two directions of the receiving point. This paper presents a comparative study of a novel arithmetic amplitude-phase (AAP) weighted beamforming method (BFM) in vector and tensor CSAMT, which uses multiple HEDs to transmit signals with controlled amplitude ratio and phase difference to modulate the wavefront, thereby achieving beam steering and other additional functions (such as amplitude compensation). By concentrating the radiation energy in the area of interest (AoI) using BFM, the SNR can be largely regulated. The comparative simulation and analysis demonstrate that the BFM has advantages in improving energy utilization and beam steering in vector and tensor CSAMT. On the premise of same power and transceiver distance, using the AAP-weighted BFM, the SNR received in the AoI can meet the requirements better than that received via the traditional method.

Deep exploration of Jiaodong type gold deposit, taking Shanhou gold deposit, southern part of Zhaoping fault as an example

Crustal response induced by the subduction of Paleo-Pacific Plate, is crucial to study the metallogenic law and prediction of Jiaodong type gold deposit. Gold deposits are preferentially hosted in the lithospheric-scale second-order faults, which provide migration channels, mineralization corridors, and the physicochemical conditions. Super-large gold deposits in northwestern Jiaobei Terrane are generally controlled by regional linear faults, such as Sansandao, Jiaojia, Zhaoping and Qixia faults. However, Zhaoping fault is exposed sporadically (in Xiadian and Jiangjiayao gold deposits) beneath a thick cover of Quaternary basalts, which indicating that limited information can be obtained by traditional geological survey. In this study, high-precision geophysical surveys such as gravity and controlled source audio frequency magnetotellurics (CSAMT) are conducted in the Shanhou gold deposit, which hosted in southern part of Zhaoping fault. Three integrated geophysical profiles results further identified the spatial distribution of second-order oblique-slip faults of Zhaoping fault and established the relationships between brittle deformation and mineralization. The spatial variability of stratum (high density 2.82 g/cm3 and intermediate to high specific resistivity 4000 Ω m), brittle-slip faults (intermediate density 2.73 g/cm3 and low specific resistivity 200 Ω m) and magmatite (low density 2.57 g/cm3 high specific resistivity 8000 Ω m) are identified by two inversion techniques, including the man-machine interactive inversion technology and nonlinear conjugate gradient technology. In addition, the geophysical inversion pseudo sections delicately portray a smooth-out waveform low specific resistivity anomaly, which strongly couples with the spatial ore-hosted locations and enrichment places. The gold mineralized alteration zones generally dips to southeast and the angle changing from 45° to 30°, which are strong coupling with the large-scale acid magmatic intrusion and extensional tectonics occurred in the late Mesozoic. Finally, according to the deep prospecting prediction, a gold ore body with 10 m in thickness was revealed by drilling below the depth of 1,015 m, which is hosting in the brittle deformation of Zhaoping fracture zone.

A novel phased-array transmitting source in controlled-source audio-frequency magnetotellurics

Abstract In traditional controlled-source audio-frequency magnetotellurics (CSAMT), the orthogonal magnetic and electric field components in the far-field region are recorded to calculate the apparent resistivity. However, as the distance between the receiver and the transmitter increases, the electromagnetic signal weakens considerably. Moreover, as the location of the transmitter is fixed, the location of the far-field region also is fixed, which limits the exploration range. In this study, a novel phased-array transmitting source was proposed to overcome this limitation. In traditional CSAMT, a grounded single-dipole long-line source is used to transmit the electromagnetic wave. This source has a low gain and no directionality, resulting in a low signal-to-noise ratio (SNR) in the area of interest (AoI). Conversely, by using a phased-array source, beam control and stable directional radiation will be achieved so that the electromagnetic energy should be capable of effectively focusing within the AoI. Without increasing the transmitting power, the SNR should be conveniently enhanced and the size of the AoI can be greatly increased. In this paper, the characteristics of the radiation field of a single-dipole long-line source and its application in traditional CSAMT are analyzed. The design principle and the method of implementation of a novel phased-array source are provided. The feasibility and effectiveness of the proposed source are verified by simulations and experiments, and a prototype is realized.

The Effects of Magnetic Susceptibility on Controlled-Source Audio-Frequency Magnetotellurics

The Effects of Magnetic Susceptibility on Controlled-Source Audio-Frequency Magnetotellurics

Application of controlled-source audio-frequency magnetotellurics (CSAMT) for goaf detection: a case study in the Fangzi coal mine China

Application of controlled-source audio-frequency magnetotellurics (CSAMT) for goaf detection: a case study in the Fangzi coal mine China