Alginate Hydrogel Research Articles

Collagen and Alginate Hydrogels Support Chondrocytes Redifferentiation In Vitro without Supplementation of Exogenous Growth Factors

Collagen and Alginate Hydrogels Support Chondrocytes Redifferentiation In Vitro without Supplementation of Exogenous Growth Factors

Chemical and physical modification of graphene oxide nano-sheets using casein, Zn-Al layered double hydroxide, alginate hydrogel, and magnetic nanoparticles for biomedical applications

In our study, we developed a novel nanobiocomposite using graphene oxide (GO), casein (Cas), ZnAl layered double hydroxide (LDH), sodium alginate (Alg), and Fe3O4 magnetic nanoparticles. To synthesize the GO, we used a modified Hummer's method and then covalently functionalized its surface with Cas protein. The functionalized GO was combined with as-synthesized ZnAl LDH, and the composite was conjugated with alginate hydrogel through the gelation process. Finally, we magnetized the nanobiocomposite using in-situ magnetization. The nanobiocomposite was comprehensively characterized using FT-IR, FE-SEM, EDX, and XRD. Its biological potential was assessed through cell viability, hemolysis, and anti-biofilm assays, as well as its application in hyperthermia. The MTT assay showed high cell viability percentages for Hu02 cells after 24, 48, and 72 h of incubation. The nanobiocomposite had a hemolytic effect lower than 3.84 %, and the measured bacterial growth inhibition percentages of E. coli and S. aureus bacteria in the presence of the nanobiocomposite were 52.18 % and 55.72 %, respectively. At a concentration of 1 mg.mL−1 and a frequency of 400 kHz, the nanocomposite exhibits a remarkable specific absorption rate (SAR) of 67.04 W.g−1, showcasing its promising prospects in hyperthermia applications.

A Comparative Analytical Study for the Different Water Pools Present in Alginate Hydrogels: Qualitative vs. Quantitative Approaches

A Comparative Analytical Study for the Different Water Pools Present in Alginate Hydrogels: Qualitative vs. Quantitative Approaches

Inhibition of Diabetic Wound Inflammatory Response by Photocrosslinked Gelatin-sodium Alginate Hydrogel Loaded with Metformin

Inhibition of Diabetic Wound Inflammatory Response by Photocrosslinked Gelatin-sodium Alginate Hydrogel Loaded with Metformin

Fermentation-inspired macroporous and tough gelatin/sodium alginate hydrogel for accelerated infected wound healing

Gelatin and sodium alginate (SA) are two important biological macromolecules, exhibiting excellent biocompatibility and gel-forming ability. However, traditional SA and gelatin hydrogel displays limited mass transport, low porosity, instability, and poor mechanical properties extremely restricted their therapeutic effect and application scenarios. Herein, microbial fermentation and synergistic toughening strategies were used for preparing macroporous and tough hydrogel. The study investigated the fermentation and toughening conditions of hydrogel. The hydrogel composed of CaCl2 cross-linked physically network and EDC/NHS cross-linked covalently network, exhibiting significantly improved mechanical properties, and excellent recovery efficiency. In addition, the hydrogel has a hierarchical macroporous structure of 100–500 μm, demonstrating high porosity of 10 times, swelling rate of 1541.0 %, and high mass infiltration capability. Further, after Ag+ treatment, the macroporous hydrogel dressing showed outstanding biocompatibility. Compared with non-porous hydrogel, the resulting macroporous hydrogel dressing displayed high antibacterial and antioxidant properties. It could effectively alleviate intracellular ROS formation induced by H2O2.In vivo experiments indicated that it has significantly better effect than non-porous hydrogel in accelerating wound healing. The overall results suggest that the gelatin/SA-based macroporous and tough hydrogel proposed in this study holds excellent prospects for application in wound dressings.

Nanostarch-Stimulated Cell Adhesion in 3D Bioprinted Hydrogel Scaffolds for Cell Cultured Meat.

Three-dimensional (3D) bioprinting has great potential in the applications of tissue engineering, including cell culturing meat, because of its versatility and bioimitability. However, existing bio-inks used as edible scaffold materials lack high biocompatibility and mechanical strength to enable cell growth inside. Here, we added starch nanoparticles (SNPs) in a gelatin/sodium alginate (Gel/SA) hydrogel to enhance printing and supporting properties and created a microenvironment for adherent proliferation of piscine satellite cells (PSCs). We demonstrated the biocompatibility of SNPs for cells, with increasing 20.8% cell viability and 36.1% adhesion rate after 5 days of incubation. Transcriptomics analysis showed the mechanisms underlying the effects of SNPs on the adherent behavior of myoblasts. The 1% SNP group had a low gel point and viscosity for shaping with PSCs infusion and had a high cell number and myotube fusion index after cultivation. Furthermore, the formation of 3D muscle tissue with thicker myofibers was shown in the SNP-Gel/SA hydrogel by immunological staining.

Characterizing an injectable alginate hydrogel as a co‐encapsulating system for beta cells and curcumin in type 1 diabetes therapy

AbstractEncapsulating insulin‐secreting cells within biocompatible hydrogels is a tissue engineering approach for type 1 diabetes treatment. Macroencapsulation is preferred over other encapsulation methods due to its easy implantation and retrieval. However, this treatment has challenges, including the need for invasive surgery for macrocapsule implantation and host response, resulting in fibrotic overgrowth around the implant and subsequent failure of the graft. Herein, an injectable alginate hydrogel, fabricated by different concentrations of as a retarding agent, was applied to avoid surgery. According to characterization tests, hydrogel made by 0.3 M showed a higher swelling ratio and diffusion coefficient, appropriate for the diffusion of nutrients, oxygen, and insulin. It was also stiffer with a lower swelling rate, demonstrating more robust elastic and solid‐like behaviour, suitable for cell attachment. Its small pore size (133.04 ± 53.28 μm), additionally, was essential for inhibiting immunoglobulins penetration. Thus, this hydrogel was used for RIN‐5F cells encapsulation and demonstrated good biocompatibility (>88% viability), and maintained the insulin‐releasing function of cells. Afterward, we co‐encapsulated beta cells with curcumin as an anti‐inflammatory drug and investigated the effect of this agent on cell behaviour in vitro. It was indicated that curcumin did not adversely affect viability and insulin secretion.

Novel colorimetric indicators based on alginate hydrogel beads containing anthocyanin for visual freshness monitoring of shrimp and minced chicken

Novel colorimetric indicators were developed by incorporating anthocyanins into alginate hydrogel beads through electrostatic extrusion for intelligent packaging. Two different sizes of hydrogel beads were produced and applied into shrimp and minced chicken packaging to visually detect freshness status during 4 °C storage. To assess the freshness of the products, the viable count of various types of bacteria (psychrotrophic, H2S-producing, mesophilic, and Pseudomonas spp.), total volatile basic nitrogen (TVB-N) content, pH, K-value, H-value, and biogenic amines level were analyzed. The indicators' color change (ΔE) was then correlated with these parameters. Color analysis of the indicators during storage indicated ΔE values below 10 and over 30 in the hydrogels incorporated into minced chicken and shrimp packaging, respectively. The color change of both indicators integrated into the shrimp package was strongly correlated with the change in viable counts, TVB-N, pH, K-value, and H-value (r ≥ 0.8, p < 0.016), as well as biogenic amines (r = 0.7, p < 0.05). The indicators applied to minced chicken packaging showed subtle color changes during storage, while those in shrimp packaging consistently reflected shelf-life variations. This innovative approach shows potential for improving food safety and quality monitoring, particularly in seafood packaging, where indicators have been effective in visually signaling product freshness.

Hydroxyapatite-loaded macroporous calcium alginate hydrogels: Preparation, characterization, and in vitro evaluation.

Hydrogels from natural polysaccharides are of great interest for tissue engineering. This study aims (1) to prepare hydroxyapatite-loaded macroporous calcium alginate hydrogels by novel one-step technique using internal gelation in water-frozen solutions; (2) to evaluate their physicochemical properties; (3) to estimate their ability to support cell growth and proliferation in vitro. The structure of the hydrogel samples in a swollen state was studied by confocal laser scanning microscopy and was shown to represent a system of interconnected macropores with sizes of tens micron. The swelling behavior of the hydrogels, their mechanical properties (Young's moduli) in function of a hydroxyapatite content (5-30 mass%) were studied. All hydrogel samples loaded with hydroxyapatite were found to support growth and proliferation of mouse fibroblasts (L929) at long-term cultivation for 7 days. The obtained macroporous composite Ca-Alg-HA hydrogels could be promising for tissue engineering.

Droplet Microfluidics-Assisted Fabrication of Shape Controllable Iron-Alginate Microgels with Fluorescent Property.

Droplet-based microfluidics-assisted fabrication of alginate microgels has extensive applications in biomaterials, biomedicines, and related fields. This approach is typically achieved by crosslinking droplets of an aqueous solution of sodium alginate with various divalent and trivalent ions, such as Ca2+, Ba2+, Sr2+, etc. Despite the exceptional features exhibited by bulk alginate hydrogels when using iron ions as the crosslinking reagent, including stimulus responsiveness and complex chemistry, no attention has been given to studying the fabrication of Fe-alginate microgels through droplet microfluidics. In this work, a facile method is presented for fabricating Fe-alginate microgels using single emulsion droplets as templates and an off-chip crosslinking technique to solidify the droplets. The morphologies of the resulting microgels can be systematically adjusted by manipulating different parameters such as viscosities and ionic strength of the collecting solutions. It should be noted that these resulting microgels undergo a color change from light brown to dark brown due to presumed self-oxidation of iron ions within their skeleton structure. Furthermore, these Fe-alginate microgels are functionalized by decorating them with a positively charged linear polymer via electrostatic interactions to impart them with stable fluorescent property. These functionalized Fe-alginate microgels may find potential applications in drug delivery carriers and biomimetic structures.

Beyond the permeability barriers: Unveiling the potential of dual-crosslinking hydrogel nanofiltration membranes for high-performance molecular/ion sieving

Membrane separation technology has shown great potential in resource recovery, energy utilization, and environmental protection, attracting extensive attention for the various practical applications. The alginate-based hydrogel membrane, derived from natural biomass, possesses sustainability and anti-fouling properties, effectively reducing the burden of waste membrane disposal. However, the limitations of alginate hydrogel include its high swelling ability, low permeability, and poor mechanical properties. In this study, we propose a straightforward method to fabricate orderliness hydrogels by employing lanthanide ion via dual cross-linking with CaAlg, resulting in the formation of lanthanum calcium alginate (La-CaAlg) hydrogel membrane. The La-CaAlg membrane exhibits superior mechanical performance and anti-swelling properties compared to LaAlg and CaAlg membranes. Additionally, through small-angle scattering and low-field nuclear magnetic resonance studies on the membrane's spatial orientation, and pore size distribution, we gained the comparable results into its internal structure for the design insight. Notably, the La-CaAlg membrane demonstrates outstanding performance in dye/salt separation, showcasing high selectivity and permeability. We propose the strategy that enhances the orderliness and durability of the alginate hydrogel membrane, providing the separation design insight to overcome the limitations associated with the permeability and rejection trade-off.

Immobilization of Coprinus comatus with magnetic alginate hydrogel microsphere for improving the antioxidant activity of fermentation products

Coprinus comatus is an edible mushroom and its fermented product possesses antioxidant activity. In this study, to further enhance the antioxidant activity and improve the reusability of the strain, calcium alginate hydrogel was used as the carrier for embedding and immobilizing Coprinus comatus. The effects of CaCl2 concentration, sodium alginate concentration, microsphere diameter, and the amount of magnetic particle on the antioxidant activity of fermented products were investigated. The results showed that the magnetic immobilized microsphere prepared by 2.50% CaCl2, 2.00% sodium alginate and 0.50% Fe3O4 had the best fermentation antioxidant activity (EC50 was 0.43 ± 0.01 mg/mL) when the diameter was 5 mm, which increased by 24.56% compared to the initial activity. Besides, the microsphere showed strong reusability, the antioxidant activity was still better than the free strain after being used five times. This study not only enhanced the antioxidant activity of Coprinus comatus fermented product through immobilization, but also provided an effective method for microbial fermentation.

Alginate Improves the Chondrogenic Capacity of 3D PCL Scaffolds In Vitro: A Histological Approach.

Polycaprolactone (PCL) scaffolds have demonstrated an effectiveness in articular cartilage regeneration due to their biomechanical properties. On the other hand, alginate hydrogels generate a 3D environment with great chondrogenic potential. Our aim is to generate a mixed PCL/alginate scaffold that combines the chondrogenic properties of the two biomaterials. Porous PCL scaffolds were manufactured using a modified salt-leaching method and embedded in a culture medium or alginate in the presence or absence of chondrocytes. The chondrogenic capacity was studied in vitro. Type II collagen and aggrecan were measured by immunofluorescence, cell morphology by F-actin fluorescence staining and gene expression of COL1A1, COL2A1, ACAN, COL10A1, VEGF, RUNX1 and SOX6 by reverse transcription polymerase chain reaction (RT-PCR). The biocompatibility of the scaffolds was determined in vivo using athymic nude mice and assessed by histopathological and morphometric analysis. Alginate improved the chondrogenic potential of PCL in vitro by increasing the expression of type II collagen and aggrecan, as well as other markers related to chondrogenesis. All scaffolds showed good biocompatibility in the in vivo model. The presence of cells in the scaffolds induced an increase in vascularization of the PCL/alginate scaffolds. The results presented here reinforce the benefits of the combined use of PCL and alginate for the regeneration of articular cartilage.

Photocatalytic Conversion of Methane to Ethanol at a Three-Phase Interface with Concentration-Matched Hydroxyl and Methyl Radicals.

The direct oxidation of CH4 to C2H5OH is attractive but challenging owing to the intricate processes involving carbon-chain growth and hydroxylation simultaneously. The inherent difficulty arises from the strong tendency of CH4 to overoxidize in the commonly used pressurized powder suspension systems rich in reactive oxygen radicals (ROR), which are specifically designed for CH4 concentration and activation. Meanwhile, the strong tendency of nucleophilic attack of potent ROR on the C-C bond of the resulting product C2H5OH ultimately leads to a higher selectivity for C1 oxygenates. This study addresses this multifaceted issue by designing a three-phase interface based on a hydrophilic floating Fe(III)-cross-linked macroporous alginate hydrogel film encapsulated with C3N4 [Fe(III)@ACN] to simultaneously enhance the accessibility of H2O and CH4 molecules to the active sites and species within the macroporous channel. The hydrophilic properties of Fe(III)@ACN allow the in situ production of H2O2 from C3N4 through the water oxidation reaction under irradiation. The concurrent photoinduced Fe(II) triggers Fenton reaction with H2O2 to produce •OH. The enhanced mass transfer of CH4 at the three-phase interface ensures the efficient formation of •CH3 by reacting with •OH, ultimately facilitating carbon-chain growth in the conversion pathway from CH4 to CH3OH and finally to C2H5OH with •CH3 and •OH present in comparable concentrations. Thus, the Fe(III)@ACN catalyst exhibits a remarkable 96% selectivity for alcohol, achieving a 90% selectivity for C2H5OH in the alcohol products. The C2H5OH production rate reaches 171.7 μmol g-1 h-1 without the need for precious-metal additive.

Natural polymer hydrogel based 3D printed bioreactor testing platform for cancer cell culture

Although two-dimensional cell cultures provide a time- and cost-effective method for testing drugs at the preclinical level, they do not capture the three-dimensional cellular interactions or tumor penetration that must occur in vivo. Therefore, these drugs often fail as they transition from two-dimensional culture models to more complex ones, including animal models or even human clinical trials. The goal of this research was to develop a three-dimensional bioprinted pancreatic cancer drug testing platform that could increase the effectiveness of drug testing during the early preclinical stages. Specifically, different natural polymer hydrogel formulations of cellulose, alginate, and gelatin were tested to find the optimal printability and cell viability. It was determined that a cellulose nanocrystal and alginate hydrogel provided the best printability because of its superior shear thinning properties. In addition, BxPC-3 cells, that were printed and then cultured within this hydrogel for four days, exhibited a range of cell viability between 80 % and 60 %. To simulate vasculature around the bioprinted cultures, a spinning bioreactor was manufactured; however, it disturbed the cells, leading to a decrease in cell viability compared to stagnant cultures. Overall, the platform demonstrated good printability and cell viability for future use in pancreatic cancer drug testing.

Cloisite® 20A and polymer hydrogel as nano-vehicle for targeted and sustained release of amitriptyline

A class of nanomaterials known as anionic and cationic clays has drawn a lot of interest as a potential medication delivery vehicle. Therefore, cloisite® 20A (C-20A), chitosan hydrogel (CH) and sodium alginate hydrogel (Alg) were used as a carrier for sustained release of amitriptyline drug (AMT) as oral osmotic drug delivery system. AMT was intercalated inside the interlayer space of C-20A as well as wrapped inside CH and Alg hydrogels and prepared AMT/C-20A, AMT/CH and AMT/Alg hybrids. The intercalation of AMT inside the layer of C-20A and hydrogels were confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The contents of intercalated AMT in the AMT/C-20A, AMT/CH and AMT/Alg was determined to be 10–12 %. The release of AMT from AMT/C-20A, AMT/CH and AMT/Alg were studied at a variable value of pH (1.2–7.4). The dissolution of AMT from the AMT/C-20A, AMT/CH and AMT/Alg into the release medium was found to be a maximum (97 %, 60 % and 80 %) at pH 6.8 as the optimum pH for AMT release, and further kinetics of the drug release from the hybrids were explored. The results were fitted well to Freundlich diffusion relationship. The high release of the AMT from C-20A and CH hydrogel indicates that C-20A and CH hydrogel enables the intercalation of the AMT and allows them to be released into the target site. By comparing the release of AMT from C-20A and CH hydrogel, AMT release from C-20A was quite efficient and fast. Thus, to make the release of the intercalated AMT in more sustained manner, and consequently reduce frequency of AMT administration, AMT/C-20A was further wrapped inside CH (AMT/C-20A/CH) and Alg hydrogels (AMT/C-20A/Alg) and found the release of AMT drug in more sustainable manner and reduced the frequency of AMT administration.

Evaluation of Alginate Hydrogel Microstrands for Stromal Cell Encapsulation and Maintenance.

Mesenchymal stromal cells (MSCs) have displayed potential in regenerating organ function due to their anti-fibrotic, anti-inflammatory, and regenerative properties. However, there is a need for delivery systems to enhance MSC retention while maintaining their anti-fibrotic characteristics. This study investigates the feasibility of using alginate hydrogel microstrands as a cell delivery vehicle to maintain MSC viability and phenotype. To accommodate cell implantation needs, we invented a Syringe-in-Syringe approach to reproducibly fabricate microstrands in small numbers with a diameter of around 200 µm and a porous structure, which would allow for transporting nutrients to cells by diffusion. Using murine NIH 3T3 fibroblasts and primary embryonic 16 (E16) salivary mesenchyme cells as primary stromal cell models, we assessed cell viability, growth, and expression of mesenchymal and fibrotic markers in microstrands. Cell viability remained higher than 90% for both cell types. To determine cell number within the microstrands prior to in vivo implantation, we have further optimized the alamarBlue assay to measure viable cell growth in microstrands. We have shown the effect of initial cell seeding density and culture period on cell viability and growth to accommodate future stromal cell delivery and implantation. Additionally, we confirmed homeostatic phenotype maintenance for E16 mesenchyme cells in microstrands.

Enhancing Alginate Hydrogels as Possible Wound-Healing Patches: The Synergistic Impact of Reduced Graphene Oxide and Tannins on Mechanical and Adhesive Properties.

Hydrogels are three-dimensional crosslinked materials known for their ability to absorb water, exhibit high flexibility, their biodegradability and biocompatibility, and their ability to mimic properties of different tissues in the body. However, their application is limited by inherent deficiencies in their mechanical properties. To address this issue, reduced graphene oxide (rGO) and tannins (TA) were incorporated into alginate hydrogels (Alg) to evaluate the impact of the concentration of these nanomaterials on mechanical and adhesive, as well as cytotoxicity and wound-healing properties. Tensile mechanical tests demonstrated improvements in tensile strength, elastic modulus, and toughness upon the incorporation of rGO and TA. Additionally, the inclusion of these materials allowed for a greater energy dissipation during continuous charge-discharge cycles. However, the samples did not exhibit self-recovery under environmental conditions. Adhesion was evaluated on pig skin, revealing that higher concentrations of rGO led to enhanced adhesion, while the concentration of TA did not significantly affect this property. Moreover, adhesion remained consistent after 10 adhesion cycles, and the contact time before the separation between the material and the surface did not affect this property. The materials were not cytotoxic and promoted healing in human fibroblast-model cells. Thus, an Alg/rGO/TA hydrogel with enhanced mechanical, adhesive, and wound-healing properties was successfully developed.

Tuning Mechanical Characteristics and Permeability of Alginate Hydrogel by Polyvinyl Alcohol and Deep Eutectic Solvent Addition.

Alginate-based hydrogels are widely utilized for various applications, including enzyme immobilization and the development of drug delivery systems, owing to their advantageous characteristics, such as low toxicity, high availability and cost-effectiveness. However, the broad applicability of alginate hydrogels is hindered by their limited mechanical and chemical stability, as well as their poor permeability to hydrophobic molecules. In this study, we addressed the mechanical properties and chemical resistance of alginate hydrogels in a high-pKa environment by the copolymerization of alginate with polyvinyl alcohol (PVA). The addition of PVA resulted in a threefold improvement in the shear modulus of the copolymeric hydrogel, as well as enhanced chemical resistance to (S)-α-methylbenzylamine, a model molecule with a high pKa value. Furthermore, we addressed the permeability challenge by introducing a betaine-propylene glycol deep eutectic solvent (DES) into the PVA-alginate copolymer. This led to an increased permeability for ethyl 3-oxobutanoate, a model molecule used for bioreduction to chiral alcohols. Moreover, the addition of the DES resulted in a notable improvement of the shear modulus of the resulting hydrogel. This dual effect highlights the role of the DES in achieving the desired improvement of the hydrogel as an immobilization carrier.

Enhanced treatment of acute organophosphorus pesticide poisoning using activated charcoal-embedded sodium alginate-polyvinyl alcohol hydrogel.

The adsorption of activated charcoal is currently a major clinical treatment for acute organophosphorus pesticide poisoning (AOPP). However, the adsorption duration and efficiency of this method is unstable. In this study, a hydrogel embedding activated charcoal was prepared and its alleviating effects on AOPP were investigated. A composite hydrogel using sodium alginate and polyvinyl alcohol (SA-PVA) hydrogel was prepared in this study. The structural properties of the SA-PVA hydrogel were characterized via multiple analysis including FTIR, TGA, XRD, SEM, tensile strength and expansion rate. Based on these, activated charcoal (AC) was embedded within the SA-PVA hydrogel (SA-PVA-AC) and it was used for the treatment of AOPP. Structural characterization indicated SA-PVA hydrogel possesses excellent mechanical properties and biocompatibility. The invivo study demonstrated that SA-PVA-AC significantly alleviated the inflammation and oxidative damage in the liver, as evidenced by reduced levels of IL-6, TNF-α, and, IL-1β, SOD, and MDA. Furthermore, SA-PVA-AC treatment effectively re-regulated the activities of serum AST and ALT, exhibiting an improved effect on liver function. The findings suggest that activated charcoal embedded within SA-PVA hydrogel has significant potential as a therapeutic agent in treating AOPP, and offering a novel approach to managing pesticide-induced toxicity.