Algal Biomass Production Research Articles

Evaluating poultry excreta leachate for algal biomass and biodiesel production for resource recovery and circular economy

Evaluating poultry excreta leachate for algal biomass and biodiesel production for resource recovery and circular economy

Opportunities for biogas production from algal biomass

Energy security is a critical global challenge in the transition to sustainable development. Anaerobic digestion (AD) offers a promising renewable energy solution that mitigates environmental impacts. Algae, as biomass feedstock, have shown significant potential for bioenergy production; however, their complex chemical composition poses challenges to the efficiency of the AD process. To address these limitations, various pretreatment methods have been applied to enhance biogas production. In this study, we performed a comprehensive meta‐analysis to evaluate the effects of different pretreatments on methane (CH₄) yields from both microalgae and macroalgae. Our results demonstrate that biological, physical, and combined chemical–physical pretreatments significantly improve CH₄ production in microalgae, with increases of up to 141%, 125%, and 151%, respectively. For macroalgae, physical pretreatments were the most effective, leading to a 129% increase in CH₄ yield. We also estimate that utilizing just 10% of the global algal biomass production (3.6 Mt) could generate over 5.5 TWh y−1 of energy. This potential could be doubled with the application of appropriate pretreatment strategies. These findings highlight the role of algae in advancing renewable energy production and contribute to the growing body of knowledge on optimizing AD processes for cleaner energy generation.

Natural Antimicrobial Agents from Algae: Current Advances and Future Directions.

Infectious diseases have significantly shaped human history, leading to significant advancements in medical science. The discovery and development of antibiotics represented a critical breakthrough, but the rise of antibiotic-resistant pathogens now presents a serious global health threat. Due to the limitations of current synthetic antimicrobials, such as toxicity and environmental concerns, it is essential to explore alternative solutions. Algae, particularly microalgae and cyanobacteria, have emerged as promising sources of bioactive antimicrobial compounds. This review provides a comprehensive analysis of the antimicrobial properties of algal-derived compounds, including polysaccharides, fatty acids, and phenols, which have shown effectiveness against multi-drug-resistant bacteria. A co-occurrence bibliometric analysis using VOSviewer highlighted five key research clusters: antibiotic resistance, algal extracts, biosynthesis, water treatment, and novel pharmacological compounds. Furthermore, the primary mechanisms of action of these bioactive compounds, such as the inhibition of protein synthesis and cell membrane disruption, were identified, demonstrating their potential against both common and multi-resistant pathogens. Future research should prioritize optimizing algal biomass production, utilizing genetic and metabolic engineering, and creating innovative delivery systems to enhance the efficient production of bioactive compounds.

Valorization of abattoir water discharge through phycoremediation for enhanced biomass and biodiesel production

Phycoremediation has been discussed as a multipurpose strategy to refine various waste streams for sustainable algal biomass, value-added compounds, and biodiesel production. While phycoremediation has been explored for various wastewaters, there is still a research gap in systematical understanding the impact of abattoir water discharge (AWD) on both algal growth and biodiesel quality. The present study evaluated the potential of Chlorella sorokiniana to grow at different ratios of AWD, 30–90 %, v/v with conventional growth medium. Results showed that nutrient removal efficiency after 12 days of cultivation reached up to 85 % for total nitrogen, 78 % for total phosphorus, 70 % for potassium, and 65 % for sodium. Thus, all algae-treated AWD samples showed Kelly ratio (KR) values less than 1, confirming their suitability for direct application in soil irrigation. In addition, there were insignificant variations in algal growth and biomass yield across all treatments. Interestingly, carotenoids yield showed significant increase in all AWD ratios, with the highest recorded value of 0.750 mg L−1 at day 12 using 90 % AWD, compared to 0.523 mg L−1 in the control. Among various treatments, C. sorokiniana grown in 90 % AWD exhibited the highest lipid content of 201.6 mg g−1 algal dw (comparing to 180.6 mg g−1 dw in the control). The biodiesel derived from C. sorokiniana at different AWD ratios demonstrated promising characteristics due to enhancement of saturated fatty acids proportion, which resulted in lower iodine value, longer oxidation stability, and higher cetane number than the control.

Defining algal bloom phenology in Lake Erie

Elucidating the impact of global climate change on aquatic ecosystems, particularly through phenological shifts in primary producers, is critical for understanding ecological resilience. Here, we focus on the phenological shifts in chlorophyll as a proxy for algae biomass and primary production in aquatic ecosystems, specifically in Lake Erie as well as concentrations of the toxin microcystin. By tracking temporal changes in each, we identified key phenological phases important to estimate duration, magnitude, and intensity of harmful algal blooms (HABs). Determining which influential biotic and abiotic factors such as temperature, wind speed, nutrient availability, and climate change is most important, is a long-term management need for Lake Erie, which can be explored using our methodology. Our novel statistical framework employing Bayesian generalized additive mixed models described seasonal chlorophyll and particulate microcystin concentration from Lake Erie and our simple geometric method identified the start, peak, and end of algal blooms. This research enhances our understanding of the ecological effects of nutrient pollution on aquatic ecosystems and provides a repeatable method for determining phenological events without the need for user defined cutoffs which aids in the management and mitigation of HABs, safeguarding water quality in regions dependent on lakes for drinking water.

Species‐specific stoichiometric effects of leaf litter on algal growth, production, and cell quotas

AbstractDissolved organic matter and nutrients released from leaf litter are important cross‐ecosystem resources supporting freshwater food webs. Dissolved organic matter supports heterotrophic organisms in freshwater communities. However, the role of nutrients released from leaf litter in the autochthonous production in aquatic ecosystems is not well understood. Therefore, we investigated how dissolved nutrients released from leaf litter affect algal growth, biomass production, and cellular elemental ratios. Specifically, we experimentally examined the response of green algae to nitrogen (N) and phosphorus (P) released from leaf litter of 11 temperate tree species and the degree of deficiency of nutrient elements other than N and P relative to algal demand in these litter leachates by supplementing these elements. We found that algal growth did not significantly increase with dissolved N or P in the leaf leachates. In contrast, algal biomass production increased with dissolved N concentration, regardless of amendment. Algal growth and production limitation by deficiency of elements other than N and P was found only in the leachate of Japanese hemlock, indicating that the concentrations or release efficiencies of these elements in this leaf litter were lower than those of N and P relative to algal requirements. More importantly, leaf litter leachates from different tree species altered algal cell quotas and C:N:P ratios, which would affect secondary production. These results suggest that variations in leaf litter leachate stoichiometry caused by vegetation change would affect the abundance and chemical composition of phytoplankton, and thus the trophic transfer efficiency between phytoplankton and herbivorous zooplankton.

Xylose, glucose and acetate as feedstock for three microalgal species cultivated in heterotrophy

Microalgae are known as good producers of high-added value bioproducts useful in many applications such as pharmaceuticals, nutrition or biofuel production. In contrast to phototrophy, heterotrophy emerges as a promising strategy for algal biomass production due to high cell densities, controlled conditions and reduced space requirement. Hemicellulose is the second most abundant material in land plants. Its hydrolysis liberates xylose, glucose, acetate. Our study focuses on three microalgal species, Galdieria sulphuraria, Euglena gracilis, and Auxenochlorella protothecoides, cultivated under heterotrophy with the above-mentioned carbon sources, supplemented alone or in combination. Growth parameters and biomass analysis revealed distinctive characteristics. G. sulphuraria, despite a modest fatty acid content (5–15 % w/w), displayed potential for hemicellulose valorization, demonstrating high biomass yield using xylose as a sole carbon source (approx. 0.5 gDW gxylose−1) and high saturated fatty acid (SFA) content (45–63 %). In our cultivation conditions, E. gracilis only assimilated acetate with low fatty acid content (approx. 6 % w/w), but high SFA content (60–77 %) and high paramylon content (47 % w/w), convertible to wax-esters under anaerobiosis. A. protothecoides exhibited biomass yields of 0.42–0.54 gDW gsubstrate−1 depending on the carbon substrate supplied but maintained constant fatty acid content (16–18 % w/w) in the presence of all substrates except xylose. Surprisingly, despite an inability to grow with xylose alone, sugar depletion analysis indicated decreasing xylose concentration when other carbon sources were present in the cultivation medium for this alga. This comparative study discusses the strengths and weaknesses of each strain, providing insights into their potential when grown on hemicellulose carbon sources.

Mild osmotic stress offers photoprotection in Chlamydomonas reinhardtii under high light

The exposure of autotrophs to high light intensities significantly impacts their photosynthetic performance. When combined with unpredictable climate changes, the lethality of these effects is exacerbated and, often surpassing the organisms' threshold for tolerance. In this regard, our study centres on examining the mitigating effects of mild osmotic stress induced by 2% Polyethylene Glycol (PEG) in conjunction with high-light conditions, using Chlamydomonas reinhardtii as a model system. Cells were cultivated under low PEG-induced osmotic stress at various light intensities, and their responses were analyzed through biochemical and biophysical approaches. Remarkably, cells grown under lower PEG concentrations exhibited superior growth, increased biomass, and enhanced photosynthetic efficiency under high light compared to non-PEG-treated cells. Surprisingly, their non-photochemical quenching (NPQ) levels were lower, indicating the operation of a distinct photoprotective mechanism in PEG-grown samples. The PEG-grown cells demonstrated higher chlorophyll content but lower carotenoid content, supporting the NPQ data. Circular dichroism analysis suggested that the macro-organization of super-complexes was minimally disrupted in PEG-grown samples, even under high light. This was further supported by Blue native PAGE, which showed greater stability of the super-complexes in PEG-grown cells, implying heightened stability in pigment-protein interactions. Immunoblot analysis revealed minimal differences in core reaction center proteins between PEG-grown and non-PEG cells. Notably, this protective mechanism was absent in the cell wall-deficient mutant CC503. We propose that the partial photoprotection observed is attributed to the PEG shielding the cell wall. This result holds promise for enhancing algal biomass production under natural environmental conditions influenced by fluctuating light intensity.

Comprehensive assessment of microalgal-based treatment processes for dairy wastewater.

The dairy industry is becoming one of the biggest sectors within the global food industry, and these industries use almost 34% of the water. The amount of water used is governed by the production process and the technologies employed in the plants. Consequently, the dairy industries generate almost 0.2-10L of wastewater per liter of processed milk, which must be treated before being discharged into water bodies. The cultivation of microalgae in a mixotrophic regime using dairy wastewater enhances biomass growth, productivity, and the accumulation of value-added product. The generated biomass can be converted into biofuels, thus limiting the dependence on petroleum-based crude oil. To fulfill the algal biorefinery model, it is important to utilize every waste stream in a cascade loop. Additionally, the harvested water generated from algal biomass production can be recycled for further microalgal growth. Economic and sustainable wastewater management, along with proper reclamation of nutrients from dairy wastewater, is a promising approach to mitigate the problem of water scarcity. A bibliometric study revealing limited work on dairy wastewater treatment using microalgae for biofuel production. And, limited work is reported on the pretreatment of dairy wastewater via physicochemical methods before microalgal-based treatment. There are still significant gaps remains in large-scale cultivation processes. It is also crucial to discover robust strains that are highly compatible with the specific concentration of contaminants, as this will lead to increased yields and productivity for the targeted bio-product. Finally, research on reutilization of culture media in photobioreactor is necessary to augument the productivity of the entire process. Therefore, the incorporation of the microalgal biorefinery with the wastewater treatment concept has great potential for promoting ecological sustainability.

Hydrogel-based photobioreactor for Solid-State cultivation of Chlorella vulgaris

Solid-state cultivation is a promising technology for algal biomass production, achieving high productivities without the need for dewatering. However, such systems have suffered from high evaporation, and capital costs. Here is described a hydrogel photobioreactor (hPBR) with the aim of reducing water demand in solid-state cultivations. Two designs are described with “Design A” offering better humidity control overgrowth conditions. A biomass productivity of 2.41gm-2d-1, and 2.87gm-2d-1 when using physically crosslinked poly(vinyl alcohol) (pPVA) and chemically crosslinked PVA (cPVA) respectively were achieved with Chlorella vulgaris with a water demand around 0.44 kg g−1 of biomass. Over the 23 days of growth, the lipid content increased from 18.9 % to 56.6 % and 13.8 % to 43.2 % for pPVA and cPVA respectively, and the chlorophyll content decreased by more than 81 %. However, cell viability stayed high at over 98 % and surface coverage analysis showed good coverage of the gel surface.

Cultivation modes affect the morphology, biochemical composition, and antioxidant and anti-inflammatory properties of the green microalga Neochloris oleoabundans

Microalgae are considered promising sustainable sources of natural bioactive compounds to be used in biotechnological sectors. In recent years, attention is increasingly given to the search of microalgae-derived compounds with antioxidant and anti-inflammatory properties for nutraceutical or pharmacological issues. In this context, attention is usually focused on the composition and bioactivity of algae or their extracts, while less interest is driven to their biological features, for example, those related to morphology and cultivation conditions. In addition, specific studies on the antioxidant and anti-inflammatory properties of microalgae mainly concern Chlorella or Spirulina. The present work was focused on the characterization of the Chlorophyta Neochloris oleoabundans under two combinations of cultivation modes: autotrophy and glucose-induced mixotrophy, each followed by starvation. Biomass for morphological and biochemical characterization, as well as for extract preparation, was harvested at the end of each cultivation phase. Analyses indicated a different content of the most important classes of bioactive compounds with antioxidant/anti-inflammatory properties (lipids, exo-polysaccharides, pigments, total phenolics, and proteins). In particular, the most promising condition able to prompt the production of antioxidant algal biomass with anti-inflammatory properties was the mixotrophic one. Under mixotrophy, beside an elevated algal biomass production, a strong photosynthetic metabolism with high appression of thylakoid membranes and characteristics of high photo-protection from oxidative damage was observed and linked to the overproduction of exo-polysaccharides and lipids rather than pigments. Overall, mixotrophy appears a good choice to produce natural bioactive extracts, potentially well tolerated by human metabolism and environmentally sustainable.

Heavy metals removal by algae and usage of activated metal-enriched biomass as cathode catalyst for improving performance of photosynthetic microbial fuel cell

Cytotoxic, malignant, and mutagenic pollutants like heavy metals have emerged as a serious global threat to the ecosystem. Additionally, the quantity of noxious metals in water bodies has increased due to expanding industrial activities and the application of incompetent wastewater treatment techniques. Owing to the benefits of eco-friendly phytoremediation, the utilization of algae in photosynthetic microbial fuel cell (PMFC) for removal of heavy metals has attracted increasing attention among researchers. Therefore, a successful fabrication and operation of a modular PMFC for simultaneous algal biomass production was exhibited, thus resulting in significant removal efficiency of Cu(II) (94 %) and Co(II) (88 %). Moreover, Co(II)-accumulated algal biochar after thermal activation was utilized as a cathode catalyst for the first time and attained 64.2 mW/m2 of power density through PMFC. Hence, this easily synthesised green cathode catalyst proved its ability to enhance the overall performance of PMFC by attaining higher power output while treating wastewater.

Nickel adsorbed algae biochar based oxygen reduction reaction catalyst

Lately, the bio electrochemical systems are emerging as an efficient wastewater treatment and energy conversion technology. However, their scaling-up is considerably restrained by slow-rate of cathodic oxygen reduction reaction (ORR) or otherwise by the high cost associated with the available efficient ORR catalysts. In this investigation, a cost-effective and eco-friendly approach for synthesizing Ni based ORR catalyst utilizing biosorption property of microalgae is accomplished. The synthesised Ni adsorbed algal biochar (NAB) served as an efficient cathode catalyst for enhancing ORR in a microbial carbon-capture cell (MCC). On increasing the initial concentration of Ni2+ in the aqueous medium from 100 mgL−1 to 500 mgL−1, the biosorption capacity was found to increase from 3 mgg−1 to 32 mgg−1 of algae cell. The MCC operated with NAB based cathode catalyst loading of 2 mgcm-2 exhibited 3.5 times higher power density (4.69 Wm−3) as compared to the one with commercial activated carbon. A significant organic matter removal (82 %) in the anodic chamber with simultaneous algal biomass productivity in the cathodic chamber was attained by MCC with cathode loaded with 2 mgcm−2 of NAB. Hence, this easily synthesised low-cost catalyst, out of waste stream, proved its ability to improve the performance of MCC.

Evaluation of water quality and trophic status in relation to seasonal water mixing in a highland Lake Ardibo, Ethiopia.

The aim of the present study was to evaluate the spatio-temporal variability of various physical and chemical parameters of water quality and to determine the trophic state of Lake Ardibo. Water samples were collected from October 2020 to September 2021 at three sampling stations in four different seasons. A total of 14 physico-chemical parameters, such as water temperature, pH, dissolved oxygen (DO), electrical conductivity, turbidity, alkalinity, Secchi-depth, nitrate, ammonia, silicon dioxide, soluble reactive phosphorus, total phosphorus, chloride, and fluoride were measured using standard methods. The results demonstrated that temporal variation existed throughout the study period. Except for turbidity, the water quality of the lake varied significantly within the four seasons (ANOVA, p < 0.05). DO levels decreased significantly during the dry season following water mixing events. Chlorophyll-a measurements showed significant seasonal differences ranging from 0.58 μg L-1 in the main-rainy season to 8.44 μg L-1 in the post-rainy period, indicating moderate algal biomass production. The overall category of Lake Ardibo was found to be under a mesotrophic state with medium biological productivity. A holistic lake basin approach management is suggested to maintain water quality and ecological processes and to improve the lake ecosystem services.

Cultivation of Microalgae (Scenedesmus sp.) Using Coal Mining Wastewater and Separation via Coagulation/Flocculation and Dissolved Air Flotation (DAF)

Algae growth can be carried out in treated mine waters, providing biomass and helping to achieve the standards for water discharge. However, efficient separation of algae from the aqueous medium is crucial. The present work investigated the stability of Scenedesmus sp. in treated acid drainage from coal mining and assessed the harvesting of microalgae via coagulation/flocculation and dissolved air flotation (DAF). Successful algae growth was achieved, with cells remaining suspended in the water at a wide range of pH values, requiring the use of reagents for destabilization/aggregation. Algae coagulation/flocculation was attained with the use of tannin or ferric chloride associated with an anionic polymer flocculant at a pH of 8.0 ± 0.1. When combined with the flocculant, both tannin and the inorganic coagulant proved effective in enhancing floc stability and hydrophobicity for the DAF process. In summary, this operational approach facilitated algae biomass recovery and significantly reduced turbidity in the treated water. Finally, a schematic diagram illustrating the algae cultivation and harvesting process is presented, offering a practical alternative to acid mine drainage (AMD) treatment refinement associated with algae biomass production.

Characterization of hypersaline Oklahoma native microalgae cultivated in flowback and produced water: growth profile and contaminant removal.

This work explores the potential of three hypersaline native microalgae strains from Oklahoma, Geitlerinema carotinosum, Pseudanabaena sp., and Picochlorum oklahomensis, for simultaneous treatment of flowback (FW) and produced wastewater (PW) and the production of algal biomass. The quality of wastewater before and after treatment with these microalgae strains was evaluated and a characterization of algal biomass in terms of moisture, volatile matter, fixed carbon, and ash contents was assessed. The experimental results indicated how all the microalgae strains were able to grow in both FW and PW, revealing their potential for wastewater treatment. Although algal biomass production was limited by nutrient availability both in PW and FW, a maximum biomass concentration higher than 1.35g L-1 were achieved by the three strains in two of the PWs and one of the FWs tested, with Pseudanabaena sp. reaching nearly 2g L-1. Interestingly, higher specific growth rates were obtained by the two cyanobacteria strains G. carotinosum and Pseudanabaena sp. when cultivated in both PW and FW, compared to P. oklahomensis. The harvested algal biomass contained a significant amount of energy, even though it was significantly reduced by the very high salt content. The energy content fell within the recommended range of 16-17MJ kg-1 for biomass as feedstock for biofuels. The algal treatment resulted in the complete removal of ammonia from the wastewater and a significant reduction in contaminants, such as nitrate, phosphate, boron, and micronutrients like zinc, manganese, and iron.

Ammonia production from microalgal biosystem: Present scenario, cultivation systems, production technologies, and way forward

Recent advancements in renewable energy technologies have increased the demand for ammonia production from a variety of biomasses due to biomass’s abundant availability. Many types of biomass are used to generate biofuels by thermochemical and biochemical methods. These include residues from farming and forests, municipal solid waste, energy crops, food processing residues, industrial organic effluents, and algae. Microalgae, among the biomasses, are a valuable resource for ammonia and hydrogen production because they have a higher biomass production rate than others. It is possible to use steam gasification, pyrolysis, catalytic pyrolysis, and steam catalytic gasification to move nitrogen from algal biomass to NH3. However, intensive investigation is required in new directions to develop a mature and cost-effective technology. This article closely examines the current production of ammonia and the feasibility of utilizing algal biomass for the production of hydrogen and ammonia through various biochemical and thermochemical routes. The study comprehensively addressed the characteristics of ammonia and the current status of its production across multiple countries. The subsequent section discusses the cultivation systems and life cycle assessment of algal biomass production for fuels. Furthermore, the ammonia/hydrogen production methods utilizing algal biomass are also listed and discussed.

Bioprospecting of Chlamydomonas reinhardtii for boosting biofuel-related products production based on novel aggregation-induced emission active extracellular polymeric substances nanoprobes

Biofuel production from microalgae has been greatly restricted by low biomass productivity and long-term photosynthetic efficacy. Here, a novel strategy for selecting high-growing, stress-resistant algal strains with high photosynthetic capacity was proposed based on biocompatible extracellular polymeric substances (EPS) probes with aggregation-induced emission (AIE) properties. Specifically, AIE active EPS probes were synthesized for in-situ long-term monitoring of the EPS productivity at different algal growth stages. By coupling the AIE-based fluorescent techniques, algal cells were classified into four diverse populations based on their chlorophyll and EPS signals. Mechanistic studies on the sorted algal cells revealed their remarkable stress resistance and high expression of cell division, biopolymer production and photosynthesis-related genes. The sorted and subcultured algal cells consistently exhibited relatively higher growth rates and photosynthetic capacities, resulting in an increased (1.2 to 1.8-fold) algal biomass production, chlorophyll, and lipids. This study can potentially open new strategies to boost microalgal-based biofuel production.

Engineered algal systems for the treatment of anaerobic digestate: A meta-analysis

The objective of this review was to provide quantitative insights into algal growth and nutrient removal in anaerobic digestate. To synthesize the relevant literature, a meta-analysis was conducted using data from 58 articles to elucidate key factors that impact algal biomass productivity and nutrient removal from anaerobic digestate. On average, algal biomass productivity in anaerobic digestate was significantly lower than that in synthetic control media (p < 0.05) but large variation in productivity was observed. A mixed-effects multiple regression model across study revealed that biological or chemical pretreatment of digestate significantly increase productivity (p < 0.001). In contrast, the commonly used practice of digestate dilution was not a significant factor in the model. High initial total ammonia nitrogen suppressed algal growth (p = 0.036) whereas initial total phosphorus concentration, digestate sterilization, CO2 supplementation, and temperature were not statistically significant factors. Higher growth corresponded with significantly higher NH4–N and phosphorus removal with a linear relationship of 6.4 mg NH4–N and 0.73 mg P removed per 100 mg of algal biomass growth (p < 0.001). The literature suggests that suboptimal algal growth in anaerobic digestate could be due to factors such as turbidity, high free ammonia, and residual organic compounds. This analysis shows that non-dilution approaches, such as biological or chemical pretreatment, for alleviating algal inhibition are recommended for algal digestate treatment systems.

Renewable green oil as a low-cost option for large-scale, long duration energy storage to produce on-demand electricity

&lt;p class="MsoNormal" style="text-align: justify;"&gt;&lt;span style="font-size: 14pt; font-family: 'times new roman', times, serif;"&gt;The rapid growth of renewable solar and wind energy necessitates extensive, long-term energy storage solutions to stabilize the electric grid and address the intermittent nature of these sources. In the absence of cost-effective long-duration, large-scale (LDLS) energy storage, there is a risk of increased disruptive blackouts and brownouts as intermittent energy sources approach 50% of electricity generation. Our analysis underscores volumetric energy density as a pivotal determinant in LDLS energy storage solutions, which is particularly crucial during periods of diminished renewable resource availability, such as the rainy season. Despite emphasis on conventional electric batteries and mechanical storage technologies such as compressed air and pumped hydro for LDLS, their costs pose a significant obstacle to widespread adoption, especially in emerging economies. In this study, we present a groundbreaking approach to LDLS: on-demand electricity generation from carbon-neutral renewable oil, known as "green oil," leveraging Reliance&amp;rsquo;s innovative catalytic hydrothermal liquefaction (R-CAT-HTL) technology. Our investigation evaluated two distinct sources of green oil production: organic waste streams (e.g., municipal solid waste, agricultural-waste, etc.) and on purpose production of algal biomass. We demonstrate that burning renewable green oil to produce electricity offers a cost-effective solution for large-scale (GWh) long-duration (many days) energy storage, ensuring the stability, reliability, and resiliency of the electric grid. We also demonstrate that minimum 14 days, ideally 30 days energy storage is needed for continuous uninterrupted service, especially critical for manufacturing facilities. Through a meticulous levelized cost of storage (LCOS) analysis comparing green oil with other LDLS technologies reported in literature, we demonstrate the cost effectiveness of green oil. In this model, green oil serves as stored energy, functions akin to a battery and is efficiently converted into electricity through conventional reciprocating engines or next-generation more efficient turbines. Our findings suggest that green oil derived from diverse organic sources is the most economically viable option for GWh-scale storage, particularly when storage requirements extend beyond a single day. This research thus presents a transformative cost-effective solution to the pressing challenge of LDLS energy storage, accelerating a sustainable and resilient energy future.&lt;/span&gt;&lt;/p&gt;