Eight soil samples were selected around Najaf governorate at depth levels 40-50 cm. X-Ray Fluorescence (XRF) was used to determine the concentrations of major and trace elements. Liner and mass attenuation coefficient (µ, µρ) have been determined at gamma energies (662, 1172,1332) keV using NaI (Tl) detector. The range of linear attenuation coefficients for calculated samples were (0.553-1.163) cm-1, (0.122-0.178) cm-1 and (0.049-0.105) cm-1 at (662, 1172,1332) keV respectively. The range of mass attenuation coefficients obtained (0.39-0.76) cm2/gm, (0.087-0.117) cm2/gm and (0.0336-0.074) cm2/gm at (662, 1172,1332) keV respectively. The results showed that Fe content in the samples has a strong effect on the mass attenuation coefficient and this parameter is inversely proportional to the gamma energy.

Hiding secret information in the image is a challenging and painstaking task in computer security and steganography system. Certainly, the absolute intricacy of attacks to security system makes it more attractive.in this research on steganography system involving information hiding,Huffman codding used to compress the secret code before embedding which provide high capacity and some security. Fibonacci decomposition used to represent the pixels in the cover image, which increase the robustness of the system. One byte used for mapping all the pixels properties. This makes the PSNR of the system higher due to random distribution of embedded bits. Finally, three kinds of evaluation are applied such as PSNR, chi-square attack, and HVS attack.

The concept of implementing e-government systems is growing widely all around the world and becoming an interest to all governments. However, governments are still seeking for effective ways to implement e-government systems properly and successfully. As services of e-government increased and citizens’ demands expand, the e-government systems become more costly to satisfy the growing needs. The cloud computing is a technique that has been discussed lately as a solution to overcome some problems that an e-government implementation or expansion is going through. This paper is a proposal of a new model for e-government on basis of cloud computing. E-Government Public Cloud Model EGPCM, for e-government is related to public cloud computing.

Simple and rapid spectrophotometric determination of furosemide (FUR) has been investigated .The method is based on acid hydrolysis of FUR to free primary aromatic amine and diazotization followed by coupling with 3, 5 di methyl phenol (3, 5-DMPH) at basic medium. The absorbance was measured at 434 nm, the method was optimized for best condition, and beers’ law is obeyed over the range of 0.4-50 µg.mL-1 with molar absorptivity and sandal’s sensitivity 1.3899 x104 L moL-1 .cm-1 and 0.0238x104 µg.cm-2 respectively. Analysis of solution containing nineteen different concentrations of FUR gave a correlation coefficient of (0.9999) and limit of detection, limit of quantitation were 0.127, 0.464µg.mL-1 respectively. The reaction stoichiometry was evaluated by Job’s and mole ratio method was found to be 1:1(diazotized FUR: 3, 5-DMPH) .The method was applied in synthetic urine and pharmaceutical formulation. The recovery of FUR in spiked urine was satisfactory resulting in the values of (99±3.32) %, the results of the suggested method was compared with available official literature method.

The adsorption of cephalexin.H2O from aqueous solution on attapulgite, bentonite and kaolin has been studied at the human body temperature (37.5˚C) and at 5, 27, 47˚C in 0.1M hydrochloric acid (pH 1.2). The value of pH 1.2 has been chosen to simulate the pH of stomach fluid. The clays show the following order: Bentonite > attapulgite > kaolin, for their activity to adsorb cephalexin.H2O. The charged clay particles can attract molecules either by electrostatic forces, for the molecules of oppositely charged, or by inducing dipole formation in the neutral molecule. The L-shaped adsorption isotherm indicated that drug molecules arrangement in a flat geometry on the clay surface. The results indicated the applicability of Langmuir isotherm for adsorption of drug on three clays. The amount of cephalexin.H2O adsorbed on the three clays was increased with increasing pH value from 1.2 to 5. At the acidic pH, the competition between cephalexin.H2O molecules and hydronium ions results in a reduction in adsorption process. At fixed temperature and pH, the adsorption of cephalexin.H2O on the three clays was increased with increasing the ionic strength of solution. The data showed a little increase in the amount of drug adsorbed by attapulgite and bentonite with increasing temperature, so the adsorption process appeared endothermic. The reverse was observed with adsorption of cephalexin.H2O on kaolin surface (exothermic).The extent of desorption of cephalexin.H2O from the clays increased when the concentration of drug increased. This result may refer to the difficulty of desorption of the drug at low concentrations, which reflects a relatively higher adsorbate - adsorbent interaction.

High Q-factor based on absorption can be achieved by tuning (the reflection and the transition percentage). In this work, the simple design and simulated in S-band have been investigated. The simulation results of G-shape resonator are shown triple band of absorption peaks 60%, 91.5%, and 70.3%) at resonance frequency 2.7 GHz, 3.26 GHz, and 4.05 GHz respectively. The results exhibited very high of the Q-factor ( 271 ) at resonance frequency ( 3.26 GHz ). The high Q-factor can be used to enhance the sensor sensing, narrowband band filter and image sensing.

The intellectual property of digital documents has been protected by using many methods of digital watermarking. Digital documents have been so much of advantages over print documents. Digital documents are less expensive and easy to store, transport, and searched compared to traditional print documents. But it has its owner limitation too. A simple image editor can be used to modify and make a forged document. Digital documents can be tampered easily. In order to utilize the whole benefits of digital document, these limitations have to overcome these limitations by embedding some text, logo sequence that identifies the owner of the document..
 In this research LSB technique has been used to embedding Digital watermarking , the proposed method consist of two major part: the embedding part and extraction part. The BMP picture type has been used in embedding process for accuracy and uncompressed image, and it is the best type in embedding process. This technique used to discover the genuine documentThe experiments show the proposed technique has 100% accuracy in authenticating the genuine document and Multimedia content security.

The present paper describes the synthesis and structural studies of new transition metal complexes of cobalt(II), nickel(II), copper(II) and cadmium(II) with two bi dentate ligands derived from quinoxaline-2,3-dione. The two ligands were fully identified by elemental analyses, FT-IR, NMR and UV-Visible spectra. The metal complexes of Co(II), Ni(II), Cu(II) and Cd(II) were isolated in the solid state after reactions of their metal chlorides with the ligands in 2:1 mole ratio. The isolated solid metal complexes were characterized with the help of elemental analyses, NMR, FT-IR and UV-Visible spectra. As well as the thermal stability of the coordinated quinoxaline polymers were tested by TG-DSC analysis and it is found that cleavage of terminal moiety was investigated, the strong coordinated bonds between oxygen donor atoms in L1 while nitrogen donor atoms of quinoxaline ring in the L2 with the metal ions. Furthermore, the thermal stability of cobalt(II), nickel(II), copper(II) and Cd(II) complexes were screened by TG-DSC analysis and the results helped us in the investigation of the proposed structure of the prepared complexes in the formula [M(L)2Cl2].XH2O and [Cd(L)2]Cl2 where L= L1 and L2 ligands derived from quinoxaline-2,3-dione.

Aim of this research is the description with evaluation the photons rate probability at quark-gluon reactions processes theoretically depending on quantum color theory. In high energy physics as well as quantum field theory and quantum chromodynamics theory,they are very important for physical processes. In quark–gluon interaction there are many processes, the Compton scattering, annihilation pairs and quark–gluon plasma. There are many quantum features, each of three and systems that taken which could make a quark–gluon plasma in character system. First, electric quark charge and color quantum charge that’s satisfied by quantum number. Second, the critical temperature and photon energy. Moreover, for such three systems have variety quantum flavor numbers: 2, 3 and 4, the photons rate are evaluated at system energy limited with critical temperature: 144 MeV. However, due to the quark–gluon plasma producing in heavy ions collisions, the photons rate is increasing with decreasing of coupling constant and photons energy in quark-quark interaction systems.

This study included the fabrication of compound (Tl2-xHgxBa2-ySryCa2Cu3O10+δ) in a manner solid state and under hydrostatic pressure ( 8 ton/cm2) and temperature annealing(850°C), and determine the effect of the laser on the structural and electrical properties elements in the compound, and various concentrations of x where (x= 0.1,0.2,0.3 ). Observed by testing the XRD The best ratio of compensation for x is 0.2 as the value of a = b = 5.3899 (A °), c = 36.21 (A °) show that the installation of four-wheel-based type and that the best temperature shift is TC= 142 K .When you shine a CO2 laser on the models in order to recognize the effect of the laser on these models showed the study of X-ray diffraction of these samples when preparing models with different concentrations of the values ​​of x, the best ratio of compensation is 0.2 which showed an increase in the values ​​of the dimensions of the unit cell a=b = 5.3929 (A °), c = 36.238 (A°). And the best transition temperature after shedding laser is TC=144 K.