The objective of this study was to evaluate bacterial prevalence in 31 root canals of human deciduous teeth with necrotic pulp and periapical lesions using bacterial culture. After crown access, the material was collected using absorbent paper points for microbiological evaluation and determination of colony forming units (CFU). Anaerobic microorganisms were found in 96.7% of the samples, black-pigmented bacilli in 35.5%, aerobic microorganisms in 93.5%, streptococci in 96.7%, and S. mutans in 48.4%. We concluded that in human deciduous teeth root canals with necrotic pulp and periapical lesions the infection is polymicrobial, with a large number of microorganisms and a predominance of streptococci and anaerobic microorganisms.

This study evaluated the effect of some plaque and salivary factors on caries progression in situ. The salivary secretion rate, buffering capacity and mutans streptococci counts from 13 volunteers were determined. For three distinct periods of time, 4, 7 and 10 days, each of them wore a palatal appliance containing 4 bovine enamel blocks. They used a non-fluoridated dentifrice during the experiment and a 20% sucrose solution was dripped onto the blocks 10 times a day. Mutans streptococci (MS), calcium (Ca), and insoluble polysaccharide (IP) were quantified in the dental plaque formed on the enamel blocks, after each period. Enamel demineralization was assessed by surface microhardness, and the percentage of surface microhardness change (%SMC) in relation to the baseline values was calculated. Enamel demineralization occurred after each period of plaque accumulation (p < 0.05), and the %SMC increased with time (from 13.8 to 48.3%). The concentrations of Ca and IP in plaque were not statistically different among the experimental times, but significant correlations were found between these concentrations and %SMC. Neither the salivary factors assessed initially nor mutans streptococci in plaque presented statistically significant correlations to %SMC. The results suggest that enamel demineralization is time-dependent and is more related to the composition of the biofilm formed than to the salivary factors studied.

Centric relation (CR) has been considered a maxillomandibular position of choice for some dental and prosthetic procedures. Although regarded as a fully reproducible relation, there is great controversy about its clinical use and recording technique, especially in patients with signs and symptoms of temporomandibular disorders (TMD). This study aimed at evaluating the effectiveness of a training program on intra- and interexaminer agreement when determining the clinical record of the CR position. Forty individuals constituted the sample, divided into symptomatic (TMD) and asymptomatic groups. Three previously calibrated examiners performed the initial assessment and the second evaluation after 30 days in a blind design, using Dawson s bilateral manipulation technique with and without an anterior stop. The amount of frontal and sagittal deviations in relation to intercuspal position, the presence of pain and discomfort during manipulation, and the first occlusal contact in CR were analyzed. Kendall and Kappa tests with a 5% level of significance were used to determine agreement. Values for both intra- and interexaminer agreement were deemed good. The best results were obtained for frontal deviations and assessment of pain (or absence of it) during manipulation. Sagittal deviations showed the lowest agreement in both examinations. The authors concluded that a calibration program could be effective for intra- and interexaminer agreement when recording centric relation. However, caution is recommended when analyzing some isolated items.

The use of autogenous bone grafts is considered to be the best choice for reconstructive surgery. In the periodontal literature, the utilization of osseous coagulum was suggested by the end of the sixties. The purpose of this study is to consider the use of bone collectors (bone traps) as an alternative method for obtaining material to fill small bone imperfections, such as fenestrations and dehiscences. Thirty samples were obtained from bone drilling during fixture installation in patients (13 men and 17 women, with an average age of 54 years) requiring treatment at the Department of Periodontology and Implant Dentistry, University of Santo Amaro. These samples were fixed in 10% neutral formaldehyde for 24 hours and subjected to histological preparation, in order to evaluate the presence of viable osteoblasts. In addition, the material was placed in a fluid thioglycolate medium and incubated for 24 hours at 36 1 C in aerobiosis and anaerobiosis. Bacterial growth evaluation was made by using six different culture media (MacConkey agar, blood agar base, mannitol salt agar, Anaerokit LTD medium, Anaerokit LTD - bile medium, Anaerinsol). The results show that, if proper care is taken to prevent saliva contamination during the surgical procedure, this method of collecting autogenous bone may be useful in situations where small amounts of bone are required.

The aim of this study was to evaluate, in vitro, the bending strength of internal fixation with absorbable and metallic screws in mandibular ramus sagittal split osteotomy in sheep hemimandibles. The screws were inserted as lag screws, with an inverted "L" configuration, and the set was submitted to bending strength tests. The load and displacement of the peak and final load averages were, respectively, 18.45 kgf, 8.19 mm and 14.38 kgf for Group I, and 16.67 kgf, 6.73 mm and 13.98 kgf for Group II. The results were submitted to statistical analysis by Student s t test and by the Pearson correlation analysis. The groups showed no statistically significant differences, indicating the feasibility of both for osteosynthesis in mandibular ramus sagittal split osteotomies.

Chocolate bars and chocolate cookies are foodstuffs highly appreciated by children. The possibility of having fluorine (F) among their components, associated with an excessive consumption, may make them decisive contributors to the total daily F intake. Thus, they could participate in the establishment of dental fluorosis. The aim of this study was to analyze the fluorine concentration [F] of the chocolates bars (CB) Baton, Confeti, Garoto Ball, Kinder Ovo, M&M s, Milkybar, Nescau, Nescau Ball, Surpresa, Surpresa Bichos, Tortuguita; and of the chocolate cookies (CC) Danyt s, Hipop , Nescau, Passatempo, Pokémon, S tio do Pica-Pau Amarelo and Trakinas. Samples were purchased in Bauru, São Paulo, Brazil. Three grams of each product were previously ashed at 525 C (CB and cookies fillings) and at 550 C (cookies dough), during 4 hours. Fluorine was separated from the ash by hexamethyldisiloxane (HMDS)-facilitated diffusion. Fluorine analysis was carried out with the specific electrode. Mean [F]s SD and amplitude (unit mg/g) were: CB = 0.30 0.45 (0.07 - 1.60, n = 12) and CC = 1.08 2.64 (0.04 - 7.10, n = 7). It was concluded that some of the analyzed foods may be important contributors to the total daily F intake. As for the product that had the highest [F] (Danyt s), when only 3 units are consumed just once a day, they may supply up to 40% of the maximum recommended daily F intake (0.07 mg/kg body weight) for a 2-year-old child (12 kg). The [F] in these products should be informed on their labels.

The purpose of this study was to evaluate in vitro the effects of different associations between irrigating solutions (EDTA-T and citric acid), intracanal medicament (NDP), and Er:YAG laser irradiation on dentin permeability. Fifty-one extracted single-rooted teeth were instrumented and divided into seven groups. Groups GI and GII had final irrigation with a demineralizing solution only (EDTA-T and citric acid, respectively). Groups GIII and GIV had final irrigation with EDTA-T and citric acid, respectively, plus an association of irrigating solution and Er:YAG laser. Groups GV and GVI had final irrigation with EDTA-T and citric acid, respectively, plus an association of intracanal medication and Er:YAG laser. Group GVII (control group) had final irrigation with distilled water. All root canals were filled with NDP associated with rhodamine B dye. After the experimental period, the samples were transversely cut into six 2.0 mm thick slices for subsequent reading using the ImageLab software. Analysis of the results allowed us to conclude that there were statistically significant differences (p < 0.05) between the groups as to the penetration of the dye-intracanal medication solution. Groups III and IV presented smaller values of dentinal permeability when compared to the other groups. The best results were obtained with the interaction between a demineralizing irrigating solution and the association of intracanal medicament and laser Er:YAG (groups V and VI). In these groups the observed penetration of the intracanal medicament plus dye solution in the apical third was, on average, 29% greater than in the other groups.

The purpose of this study was to evaluate in vitro the dentin permeability of the deciduous pulp chamber floor after employing 2-octyl cyanoacrylate and Er:YAG laser. Twenty four deciduous molars were used, divided into four groups. After chemical-surgical preparation each group received a different treatment: Group 1 - control, without treatment; Group 2 - the floor of the pulp chamber was covered with a fine layer of 2-octyl cyanoacrylate; Group 3 - the floor of the pulp chamber was irradiated with Er:YAG laser (250 mJ, 10 Hz for 30 seconds, 80 J of energy and 320 pulses), and covered with a fine layer of 2-octyl cyanoacrylate; and Group 4 - the floor of the pulp chamber was irradiated with Er:YAG laser set at the parameters already described. After that the specimens received application of 0.5% methylene blue, for 15 minutes. The teeth were cut, photographed, and the digitalized images were analyzed using the ImageLab program. The results obtained were submitted to statistical analysis. Group 4 (Er:YAG) presented the largest averages in percentage of dye penetration area (19.5%), followed by Group 1 (11.1%), Group 3 (1.4%) and Group 2 (0.2%). The experimental model allowed to conclude that the specimens conditioned with 2-octyl cyanoacrylate (Group 2) and Er:YAG laser associated to 2-octyl cyanoacrylate (Group 3) presented a decrease in permeability, and the specimens treated with Er:YAG laser (Group 4) presented an increase in permeability of the analyzed area.

A randomized clinical trial was conducted to investigate the effect of a 0.5% chlorhexidine (CHX) gel on dental plaque superinfecting microorganisms in mentally handicapped patients. Thirty inmates from the institution "Casas André Luiz" were assigned to either test group (CHX gel, n = 15) or control group (placebo gel, n = 15). The gel was administered over a period of 8 weeks. Supragingival plaque samples were collected at baseline, after gel use (8 weeks) and 16 weeks after baseline. The presence of Gram-negative Enterobacteriaceae, Staphylococcus and yeasts was evaluated. No significant growth of any superinfecting microorganism was observed in the CHX group, when compared to the placebo group. The results indicated that the 0.5% chlorhexidine gel did not produce an undesirable shift in these bacterial populations.

The use of post and core systems has become an excellent alternative for restoring endodontically treated teeth. The aim of this study was to evaluate the von Mises, maximal compressive and tensile stresses distribution using the Finite Element Method (FEM) on human teeth restored with different post and core systems. The analysis was made on endodontically treated maxillary central incisors. The post systems used in this investigation were the stainless steel or titanium Flexi Post/Flexi Flange. Composite resin was used as core material and resin cement was the cement material of choice to seat a full porcelain crown. The bi-dimensional mathematical model was created from pictures taken from an intact human maxillary central incisor and prefabricated posts. This image was transferred to a personal computer in the MSC/Nastran 4.5 software. A static and linear analysis treatment was performed when a 45 load of 100 N was applied on the lingual surface of the tooth. Based on the results obtained, it can be concluded that the post design and its material can alter the stress pattern distribution.