Wood Anatomy Research Articles

NIGHTSHADE NECTAR: A MULTIFACETED DIVE INTO MEDICINAL, POLLEN, AND STEM ANATOMIES OF FIVE SOLANACEAE WONDERS

This comprehensive study delves into the intricate anatomy and reproductive biology of five prominent members of the Solanaceae family: Capsicum frutescens L., Solanum lycopersicum L., Solanum torvum Sw., Datura stramonium L., and Solanum melongena L. Through detailed anatomical examinations, including stem structure analyses, and investigations into pollen germination processes, this research elucidates the unique characteristics and adaptations of each species. Additionally, the study provides essential insights into the materials required for free-hand sectioning and pollen viability testing, facilitating further research in plant anatomy and reproductive physiology. With a focus on both morphological and physiological aspects, this work contributes to a deeper understanding of Solanaceae plant species and their ecological significance.

Dendrochronology and extreme climate signals recorded in seven Icelandic shrubs: A multi-species approach in the sub-Arctic

Iceland, located in the climatologically sensitive subarctic zone, is one of the key areas for studying climate change and the current Arctic warming. Poor and rich heathland covers approximately 30% of Iceland, with heath vegetation being the area’s most important vegetation type. Prostrate and erect dwarf shrub and shrub species are the primary sources of dendrochronological information on the changes and characteristics of Iceland’s climate. Here, we investigate the dendrochronological potential of seven common Icelandic heathland species (Dryas octopetala, Calluna vulgaris, Salix arctica, Salix herbacea, Empetrum nigrum, Juniperus communis nana, and Betula nana) and explore the impact of climate conditions on their growth, particularly with regard to extreme meteorological events. We conducted comparative analyses among species and observed their climatic responses in a climatically, morphologically, and geologically homogeneous setting in north-eastern Iceland. After sampling, measurements, and cross-dating, we constructed local chronologies for the seven species. Of approximately 200 samples, only 113 were included in the final shrub chronologies. All chronologies covered at least 50 years, with few of them exceeding 100 years. Dendroclimatological analysis indicated that above-average temperatures in June and summer positively influence the growth of D. octopetala (June–September), J. communis (July–August), B. nana (July–August), C. vulgaris (June–August), and S. arctica (August–September). The opposite is observed for S. herbacea and E. nigrum. Climate–growth correlations indicate that the growth of these species is negatively correlated with temperature and positively correlated with winter and summer precipitation. Furthermore, among the long-lived woody species growing in Iceland, seven common species were used to assess the impact of extreme meteorological conditions on their growth. The most pronounced extreme year in the wood anatomy of Icelandic shrubs was 1979, depicted as very narrow or missing rings and as the blue ring in J. communis.

Relationships between diameter growth and functional wood anatomy in Eucalyptus globulus clones

Aim of study: We aimed to 1) analyze the variability of wood hydraulic anatomical traits in 10 clones of E. globulus Labill. with different growth rates, and 2) determine whether the magnitude of diameter growth affects the relationships between anatomical variables and diameter at breast height (DBH). Area of study: 25-year-old common garden trial in Balcarce, Buenos Aires, Argentina. Material and methods: We measured vessel diameter and number per unit area in transverse histological sections of stem wood, and calculated the proportion of vessel lumens, vessel composition (S), and theoretical specific hydraulic conductivity (Ks) of 10 E. globulus clones of high (HG) and low (LG) mean growth rates (measured as DBH) under field conditions. Main results: There was a difference in the range of variability in hydraulic anatomy between HG and LG clones, with LG clones showing a wider range. HG clones had wood with larger and fewer vessels and higher S compared to LG clones, with similar Ks between both growth groups. No clear or strong trends were observed between wood anatomy and DBH within the HG and LG groups, but across all clones a high correlation (Spearman coefficient r; p<0.001) was observed between vessel number ‒ DBH (r= -0.68), and S ‒ DBH (r= 0.74). These correlations were driven by contrasting mean values of both growth groups. Research highlights: Commercial E. globulus clones present a relatively large variation in anatomical and hydraulic strategies. However, in contrast to what is postulated for various woody species, there was no clear relationship between theoretical hydraulic efficiency and individual diameter growth rate in the genotypes studied.

Tree-ring wood density reveals differentiated hydroclimatic interactions in species along a bioclimatic gradient

Climate variations are influencing the growth dynamics of forests, with direct consequences on their biomass productivity. The scientific community, concerned with refining the understanding of tree-climate interactions, has recently used tree-ring density to elucidate ecological mechanisms that may be overlooked by earlywood, latewood, and total tree-ring widths. In this study, we model the sensitivity of intra-annual wood density in tree-rings for 15 species distributed across a broad bioclimatic and biodiverse gradient in the Mexican Republic. Maximum, minimum, latewood, and earlywood density (MaxD, MinD, LWD, and EWD, respectively) were associated with climatic data through correlation analysis and mixed-effects models. Maximum temperature (TMAX) and precipitation (P) stand out as key drivers of temporal density fluctuations, notably influencing MaxD and LWD as indicators of hydroclimatic regime changes. MinD and EWD are less responsive but prove valuable in gauging environmental sensitivity. Abies religiosa from the Southern Semi-Arid Highlands and Picea martinezii from Mediterranean California were the most responsive species to climate variables. These results open new paradigms for densitometry as a proxy for ecological processes that species face in anticipating dieback phenomena, mortality rates, and resilience mechanisms, with implications for productivity and carbon rates in the face of predicted climate variations. However, the wood density-climate relationship is even more complex, and integrative research combining other proxies (e.g., wood anatomy and chemical composition) is recommended to refine wood density variations and understand the causes of the interspecific differences found in this study.

What signs of climate variability can be extracted from the quantitative wood anatomy of Cedrela fissilis Vell. rings?

What signs of climate variability can be extracted from the quantitative wood anatomy of Cedrela fissilis Vell. rings?

Traces of Local Adaptive Acclimatization Response in the Tracheid Anatomical Traits between Dry and Wet Mesic Norway Spruce (Picea abies) Forests in Moravia, Czech Republic?

Norway spruce (Picea abies) forests in temperate zones are already reacting to short-term extreme summer heatwaves, threatening the vitality of trees and forest productivity, and can even lead to local and regional dieback events. Examining quantitative wood anatomy can provide helpful information in terms of understanding the physiology mechanisms and related responses of conifer trees to local environmental interactions in relation to tracheid adaptive capacity. This study analysed the tracheid functional anatomical traits (FATs) plasticity of six young Norway spruce trees growing in two mesic research plots with high annual precipitation (~43%) and air temperature differences during 2010–2017. The research plots are located in the sub-mountainous (Rájec Němčice) and mountainous (Bílý Kříž) belts of the Moravia region, Czech Republic. Vapour pressure deficit and cell wall reinforcement index (CWRI) were shown to be the most representative environmental parameters as proxies of dry conditions. Tracheid FATs indicated latewood phenological plasticity sensitivity, with more pronounced variability in the warmer and drier plots. Latewood tracheids of Norway spruce trees grown in the RAJ formed significantly thicker cell walls than BK during the studied period. The observed differences between the two research plots indicate additional support for tracheid cells’ hydraulic safety against cavitation and potential traces of adaptive acclimatization response.

Machine learning-based wood anatomy identification: towards anatomical feature recognition

Summary Computer vision-based wood identification has been successfully applied to recognize tree species using digital images of wood sections or surfaces. However, this image-to-species approach can only recognize a limited number of species due to two main reasons: 1) the lack of a good reference database requiring high-quality standardized images from multiple individuals of hundreds or even thousands of traded timber species, and 2) species not included in the reference database cannot be identified without expert knowledge. Another bottleneck is that the feature extraction process used by these species recognition approaches is a black box, thereby creating a discrepancy between machine learning features and wood anatomical features. This discrepancy prevents wood anatomists from understanding how these machine-learning algorithms work. Here, we survey currently existing methods used in feature extraction, classification, and deep learning methods applied in wood identification along with their pitfalls and opportunities. As an example of how the field could move forward, we launch the idea of building an image-to-features-to-species identification approach based on microscopic wood images as well as text files comprising wood anatomical descriptions. If we can manage machine learning-based algorithms to recognize the main wood anatomical traits that experts use to identify species in a (semi-)automated way, this would boost wood identification in two ways: (1) extensive reference databases for each species would become less crucial as the databases are ordered at the trait level, (2) timber identification would become more feasible for species that have not yet been included in the reference database as long as wood anatomical descriptions are available.

Articulate Storyline Interactive Learning Media on the Topic of Plant Anatomy

Articulate Storyline Interactive Learning Media on the Topic of Plant Anatomy

Online Quantitative Literacy-Based Biology Learning towards Students' Self-Efficacy

Quantitative literacy is an important skill for biology students. During COVID-19, students had to adapt to several changes, including shifting from offline to online classes. However, not all biology content can be taught easily, especially online. Therefore, students need self-efficacy abilities. Self-efficacy was important for students to be able to make a plan for their learning. This research aimed to describe students’ self-efficacy to continue their online biology learning during COVID-19, based on their quantitative literacy skills. This study used 20-item questionnaires with four choices of statements. The biology topic chosen was plant anatomy. This research measured the score of 82 first-year college students’ self-efficacy from three aspects - magnitude, strength, and generality. Data were analyzed using descriptive statistics to measure the mean, the highest, and the lowest students’ self-efficacy scores. The result showed that the average score of students’ self-efficacy was 2.72, which means students’ self-efficacy was in the moderate category. All three aspects were also in the moderate category, with the strength aspect score being the highest at 2.76 and the magnitude aspect score being the lowest at 2.66. Based on the number of participants’ level of self-efficacy, 3% of students were in the high category, 96% were in the moderate category, and 1% were in the low category. The result showed that most of the students in this research have a moderate level of self-efficacy in online biology learning, based on quantitative literacy. This means that most of the students still must develop their self-efficacy skills to learn online quantitative lessons in biology successfully. The results also suggested that it is essential to teach students how to manage their learning behavior through the development of self-efficacy to succeed in online quantitative lessons in biology learning in the future. Keywords: literacy, online class, self-efficacy

A Study of the Effects of Stimulants on Resin Yield, Resin Duct and Turpentine Chemical Composition in Pinus kesiya var. langbianensis

This study presents a comprehensive examination of Pinus kesiya var. langbianensis (Pinus kesiya var. langbianensis), the primary resin-extraction tree species in Yunnan Province, China. In this study, we formulated different concentration gradients of 0.25%, 0.5%, 1%, and 2% of diquat solution as tapping stimulant to test the effect of different concentrations on the resin gain rate of Pinus kesiya, and analyzed the relationship between anatomical structure, major chemical composition of turpentine and resin yield by methods such as wood anatomy and chemical composition analysis of turpentine. The primary focus of the investigation was on exploring the interrelationships among resin-tapping stimulants, anatomical structures, turpentine components, and resin yield. Research findings demonstrate a significant enhancement in resin production due to the application of stimulants, with the highest increase rate reaching 55% in a specific group, while others achieved approximately 30% increments. Moreover, measurement data about resin duct dimensions indicate a noteworthy increase in resin duct area for the stimulant-treated group compared to the control group. However, it should be noted that the impact on resin duct area by varying stimulant concentrations was relatively minor. Furthermore, continuous observation of resin extraction from different resin-yield classes of P. kesiya revealed insignificant variation in resin yield over time for the low and moderate resin-yield groups. In contrast, the high resin-yield group exhibited a gradual increase in resin production. Interestingly, the high resin-yield group exhibited the smallest resin duct area, but the highest resin duct density, indicating an interconnectedness of resin duct-related data that influences resin yield. Additionally, correlative investigations between anatomical structures and resin yield demonstrate a positive correlation between resin duct area and resin yield, total resin production, and average resin yield. This underscores the importance of resin duct area as a significant factor in resin production. On the other hand, the influence of stimulant concentrations on the turpentine components was found to be negligible. Overall, the correlation results suggest that turpentine components cannot reliably predict or differentiate between high and low resin-yield trees. This study provides a comprehensive analysis of the interrelationships among stimulants, anatomical structures, and turpentine components, offering a theoretical foundation for the resin extraction and resin processing industries in Yunnan Province.

Adaptive strategies based on shrub leaf-stem anatomy and their environmental interpretations in the eastern Qaidam Basin

BackgroundWater stress seriously affects the survival of plants in natural ecosystems. Plant resistance to water stress relies on adaptive strategies, which are mainly based on plant anatomy with following relevant functions: (1) increase in water uptake and storage; (2) reduction of water loss; and (3) mechanical reinforcement of tissues. We measured 15 leaf-stem anatomical traits of five dominant shrub species from 12 community plots in the eastern Qaidam Basin to explore adaptive strategies based on plant leaf-stem anatomy at species and community levels. and their relationship with environmental stresses were tested.ResultsResults showed that the combination of leaf-stem anatomical traits formed three types of adaptive strategies with the drought tolerance of leaf and stem taken as two coordinate axes. Three types of water stress were caused by environmental factors in the eastern Qaidam Basin, and the established adaptive strategy triangle could be well explained by these environmental stresses. The interpretation of the strategic triangle was as follows: (1) exploitative plant strategy, in which leaf and stem adopt the hydraulic efficiency strategy and safety strategy, respectively. This strategy is mostly applied to plants in sandy desert (i.e., Nitraria tangutorum, and Artemisia sphaerocephala) which is mainly influenced by drought stress; (2) stable plant strategy, in which both leaf/assimilation branches and stem adopt hydraulic safety strategy. This strategy is mostly applied to plants in salty desert (i.e., Kalidium foliatum and Haloxylon ammodendron) which aridity has little effect on them; and (3) opportunistic plant strategy, in which leaf and stem adopt hydraulic safety strategy and water transport efficiency strategy. This strategy is mostly applied to plants in multiple habitats (i.e., Sympegma regelii) which is mainly affected by coldness stress.ConclusionThe proposed adaptive strategy system could provide a basis for elucidating the ecological adaptation mechanism of desert woody plants and the scientific management of natural vegetation in the Qinghai-Tibet Plateau.

Response of the root anatomical structure of Carex moorcroftii to habitat drought in the Western Sichuan Plateau of China

Main conclusionThe anatomical structures of Carex moorcroftii roots showing stronger plasticity during drought had a lower coefficient of variation in cell size in the same habitats, while those showing weaker plasticity had a higher coefficient of variation. The complementary relationship between these factors comprises the adaptation mechanism of the C. moorcroftii root to drought.To explore the effects of habitat drought on root anatomy of hygrophytic plants, this study focused on roots of C. moorcroftii. Five sample plots were set up along a soil moisture gradient in the Western Sichuan Plateau to collect experimental materials. Paraffin sectioning was used to obtain root anatomy, and one-way ANOVA, correlation analysis, linear regression analysis, and RDA ranking were applied to analyze the relationship between root anatomy and soil water content. The results showed that the root transverse section area, thickness of epidermal cells, exodermis and Casparian strips, and area of aerenchyma were significantly and positively correlated with soil moisture content (P < 0.01). The diameter of the vascular cylinder and the number and total area of vessels were significantly and negatively correlated with the soil moisture content (P < 0.01). The plasticity of the anatomical structures was strong for the diameter and area of the vascular cylinder and thickness of the Casparian strip and epidermis, while it was weak for vessel diameter and area. In addition, there was an asymmetrical relationship between the functional adaptation of root anatomical structure in different soil moisture and the variation degree of root anatomical structure in the same soil moisture. Therefore, the roots of C. moorcroftii can shorten the water transport distance from the epidermis to the vascular cylinder, increase the area of the vascular cylinder and the number of vessels, and establish a complementary relationship between the functional adaptation of root anatomical structure in different habitats and the variation degree of root anatomical structure in the same habitat to adapt to habitat drought. This study provides a scientific basis for understanding the response of plateau wetland plants to habitat changes and their ecological adaptation strategies. More scientific experimental methods should be adopted to further study the mutual coordination mechanisms of different anatomical structures during root adaptation to habitat drought for hygrophytic plants.

Wood utilized for wooden components in ancient buildings of Tingbao Yang’s former residence

Summary A comprehensive analysis was conducted using optical microscopy based on wood anatomy to enhance the preservation of wooden components in Tingbao Yang’s former residence. This study identified wood samples, and statistical examination of wood species, variations in their configuration, physical and mechanical properties, and natural durability were examined. The principles for wood species selection were assessed. Findings indicate that Cunninghamia lanceolata, Pseudotsuga spp., Populus spp. and Ulmus spp. are the primary choices for these wooden components. However, certain portions incorporate Larix sect. Multiseriales, Picea brachytyla, Pinus bungeana, Pinus massoniana, Castanea sp. and Quercus subg. Lepidabalanus, sect. Prinus. Pseudotsuga spp., C. lanceolata, Ulmus spp. and Populus spp. are primarily utilized for wooden columns and melon columns. However, C. lanceolata, Ulmus spp. and Populus spp. possess inadequate parallel grain compressive strength for load-bearing compression wooden components. C. lanceolata and Ulmus spp. are widely utilized in beams, lintels, purlins, and rafters owing to their exceptional bending strength. It was noted that Castanea sp. and Quercus subg. Lepidabalanus, sect. Prinus wood varieties demonstrate superior resistance to rotting and insects compared with other types of wood. The selection of wood species for the ancient buildings of Tingbao Yang’s former residence relies on crucial principles, such as the suitability of wood properties and local selection. This selection process involves analyzing the wood properties, assessing the natural durability of wooden components, and considering the distribution of forest resources in Henan Province.

Comparative morphoanatomic and histochemical characterization of Cucurbita pepo L. specimens

Cucurbita pepo L. is popularly known as pumpkin or zucchini. Compared to the others of the genus, it presents the greatest genetic variability. Thus, given its nutritional and medicinal benefits, it results in many widely cultivated and economically important specimens. Due to this, differentiation between specimens becomes necessary, mainly pumpkin and zucchini which have different characteristics, however they receive the same scientific nomenclature (C. pepo). It is noteworthy that the anatomical knowledge of the specimens helps with taxonomy. Furthermore, due to the economic value, when it comes to vegetative propagation, the identification of structural aspects is important for the success of propagation, which depends on the regeneration of plant tissues. This study aimed to characterize and differentiate two specimens of C. pepo through morphoanatomy and histochemistry. For anatomical study, usual methods in plant anatomy were used to prepare and analyze, under an optical microscope, semi-permanent slides containing transverse sections of the roots, stems, leaves, and paradermic sections of the leaf blades of C. pepo specimens. Histochemical tests were performed on cross-sections of the specimens' leaf blades to locate chemical compounds. The optical microscopic evaluation enabled the anatomical characterization, revealing distinct characters among the specimens. For example, the zucchini shows crystals in the root. Meanwhile, the pumpkin shows sclerenchymatic pericycle in the stem and secretory ducts in the stem and leaves. Histochemical techniques showed the presence of different compounds, differentiating in the presence of starch in the zucchini and triterpenes and steroids in the pumpkin. Correct characterization provides important information for quality control of the plant drug and taxonomic differentiation of the specimens since diagnostic characters vary.

Anatomical characterization of Ocotea indecora Schott wood along a 300m altitude gradient

This study aimed to evaluate the impact of altitude on the anatomical characteristics of Ocotea indecora wood under various relief conditions in Cunha, São Paulo. Non-destructive stem samples of Ocotea indecora were collected at three altitudes within the Cunha Nucleus of the Serra do Mar State Park (1300, 1200, and 1000 m). Five non-destructive samples were taken at each altitude around the diameter at breast height (DBH) of selected trees. Trees above 1250 m were situated in plateau areas, while the remaining sampled trees were situated in escarpment areas with slopes ranging from 30 to 90%. The geolocation of sampled trees was performed using global positioning system equipment. The samples were processed following standard wood anatomy techniques. Significant differences were observed, but only in the fiber diameter of samples collected between 1000 m and 1300 m. At 1300m, fiber diameter showed the highest values, while the lowest fiber diameter was found in trees sampled at 1000 m. According to cluster dendrogram analysis, considering all analyzed variables, altitudes of 1200 m and 1300 m were grouped together, differing from the altitude of 1000m, which formed a separate cluster. Generally, anatomical elements correlate differently among themselves depending on the altitude gradient.

Electrical Properties at Multi-Frequencies for Analysis of Physical and Anatomical Properties of Fast-Growing Standing Teak Trees at Various Ages

Fast-growing teak trees are cultivated extensively in Indonesia to meet the growing demand for teak wood. However, it is necessary to assess the conditions of teak stands throughout their growth period. The nondestructive testing of wood utilizing dielectric spectroscopy approaches based on electrical properties is currently under development, particularly for evaluating tree stands. This study aimed to analyze the dielectric values of fast-growing teak tree stands within a frequency range of 250 kHz to 60 MHz and to understand the relationship between their physical and anatomical properties. A capacitance measurement system was employed to collect dielectric spectroscopy data directly from trees aged 4, 5, and 7 years. Simultaneously, physical and anatomical samples were obtained using a 0.5 cm diameter increment borer. The results revealed significant differences in the fiber length, lumen diameter, and wall thickness at each age. The optimal dielectric frequency for distinguishing wood properties in standing trees was identified to be within a range of 18 MHz to 23 MHz. In the linear model, a moderate relationship was observed with a correlation coefficient of (r)0.403, although the coefficient of determination (r2) was weak at 0.162 for green density. However, a robust relationship was observed in the linear model for specific gravity with r = 0.826 and r2 = 0.682. A weak but significant relationship was also identified with r = 0.2, a coefficient of determination of r2 = 0.04, and a significance level &lt; 0.05 in the predictive model of wood anatomy properties (vessel diameter and fiber wall thickness). Models with low r2 but high significance indicate that the independent variables still noticeably contribute to explaining the dependent variable. Further analysis and data processing can be enhanced by identifying the crucial variables in the capacitance measurement system.

Impact of Forest Fires on Wood Anatomy, Soil Composition, and Soil Microorganisms of Acacia origena Asfaw (Leguminosae) in Al Souda Mountain, Southwestern Saudi Arabia

Impact of Forest Fires on Wood Anatomy, Soil Composition, and Soil Microorganisms of Acacia origena Asfaw (Leguminosae) in Al Souda Mountain, Southwestern Saudi Arabia

Bank erosion and erosion processes from dendrogeomorphology in southern U.S. prairie streams

AbstractStreambank erosion processes influence the amount of soil material contributed to rivers and sedimentation rates in receiving reservoirs. However, the amount of data on bank erosion rates is limited both in range and extent affecting planning for mitigation and watershed management. Dendrogeomorphology is used to determine the date of wood anatomy changes in annual growth increments of roots exposed by erosion of stream banks that when coupled with measurement of the distance of roots to the channel side can be used to calculate the bank retreat rate. Erosion rates derived from dendrogeomorphology are important because these provide erosion data over longer time scales (decades). Here, we use this method to quantify erosion for three different sized watersheds (4 to 3781 km2) located in the water‐scarce southern U.S. prairies that are heavily reliant on surface water and reservoir storage. From 49 roots from the two smaller drainages, erosion ranged from 1.5 to 25.4. For 19 roots collected from the larger subbasin erosion rates were larger ranging from 7.4 to 325.0 cm/years with the larger values and variance associated with two high‐flow events that occurred a year before sampling. We also found differences in straight and meandering portions of the streams where the distance to bank was strongly and positively correlated with the years since root exposure in straight sections. In contrast, meandering bends also showed a positive but low correlation for root exposure date and distance collected. We attribute this difference to erosional processes (i.e., scour and mass wasting) occurring at these channel locations. When compared with other erosion studies across the southern U.S. prairie, our values were similar in magnitude but with low correlation to drainage area indicating site specificity of erosion mechanisms, and watershed landcover influence for different drainages, despite being in the same ecological region.

Visual plant anatomy: From science to education and vice versa

Visual plant anatomy: From science to education and vice versa

New Methods in Digital Wood Anatomy: The Use of Pixel-Contrast Densitometry with Example of Angiosperm Shrubs in Southern Siberia.

This methodological study describes the adaptation of a new method in digital wood anatomy, pixel-contrast densitometry, for angiosperm species. The new method was tested on eight species of shrubs and small trees in Southern Siberia, whose wood structure varies from ring-porous to diffuse-porous, with different spatial organizations of vessels. A two-step transformation of wood cross-section photographs by smoothing and Otsu's classification algorithm was proposed to separate images into cell wall areas and empty spaces within (lumen) and between cells. Good synchronicity between measurements within the ring allowed us to create profiles of wood porosity (proportion of empty spaces) describing the growth ring structure and capturing inter-annual differences between rings. For longer-lived species, 14-32-year series from at least ten specimens were measured. Their analysis revealed that maximum (for all wood types), mean, and minimum porosity (for diffuse-porous wood) in the ring have common external signals, mostly independent of ring width, i.e., they can be used as ecological indicators. Further research directions include a comparison of this method with other approaches in densitometry, clarification of sample processing, and the extraction of ecologically meaningful data from wood structures.