Wide Range Of Products Research Articles

Production and analysis of ethyl and butyl ethers from fatcontaining waste of the food and pulp and paper industries

In the conditions of natural resources depletion, and Climate changes caused by the greenhouse effect, world community is focused on exploring new raw materials, secondary raw materials, including waste that can be usefully used. Fat-containing waste generated in the food, pulp and paper, leather and other industries, catering facilities have significant potential in this field. Analysis of official statistics on the fat-containing waste management in the Russian Federation shows that about 22% of such waste is disposed in landfills and is irretrievably lost as raw materials. And those fat-containing wastes that are utilized are used in the production of low-profit products. At the same time, fatcontaining waste can be used to receive products that fully replace analogs produced from petrochemical and chemical raw materials. In the total mass of fat-containing waste, a significant part is made up of products with a high content of free fatty acids, which serve as raw materials for receiving a wide range of useful products. Therefore, research in this way is relevant and promising. In this study, ethyl and butyl ethers were received from waste from the food and pulp and paper industries and studied. Then ethyl and butyl ethers received from waste were tested as plasticizers for compatibility with polyvinyl chloride. A toxicity assessment was carried out for the initial waste, ethyl and butyl ethers thereof, and plasticizers with polyvinyl chloride. Based on the analysis of results, recommendations were formulated for the practical application of the method for the utilization of such waste. The novelty of the research is demonstrating the possibility of using esters received from fatcontaining waste to replace petrochemical synthesis products such as plasticizers for polymers.

Arylhydrazone‐Thioeter Palladium Pincer Complexes Catalyzed Carbonylative Suzuki–Miyaura Cross‐Coupling Using Fe(CO)5 as CO Surrogate

ABSTRACTA series of Pd(II)‐pincer complexes 3a–d have been synthesized and characterized in good yields, via C–H bond activation on arylhydrazone‐thioether ligands. The investigation of these new Pd(II)‐pincer complexes has proved that the possesses excellent catalytic activity for carbonylative Suzuki–Miyaura cross‐coupling reactions of aryl iodides with arylboronic acids using Fe(CO)5 as carbonyl source. Notably, this strategy offers several advantages such as shorter reaction time, nonrequirement of toxic CO gas, and good to excellent yield of the desired products for wide range of applicable substrate; mainly, carbonylative Suzuki–Miyaura coupling just requires only 0.5 mol% of Pd(II)‐pincer complexes. We have also demonstrated a new efficient route for the synthesis of an antineoplastic agent 4‐(methoxyphenyl)‐(3,4,5‐trimethoxyphenyl)methanone. Additionally, the possible mechanism of this Pd(II)‐pincer complexes process is further supported by the density functional theory (DFT) study.

Innovative diagnostic technologies: navigating regulatory frameworks through advances, challenges, and future prospects.

Diagnostic tools are key to guiding patient management and informing public health policies to control infectious diseases. However, many diseases still do not have effective diagnostics and much of the global population faces restricted access to reliable, affordable testing. This limitation underscores the urgent need for innovation to enhance diagnostic availability and effectiveness. Developing diagnostics presents distinct challenges, especially for innovators and regulators. Unlike medicines, regulatory pathways for diagnostics are often less defined and more complex due to their diverse risk profiles and wide range of products. These challenges are amplified in low-income and middle-income countries, which often do not have regulatory frameworks for this specific purpose. In the UK, initiatives aim to support innovation by providing clearer regulatory pathways and ensuring that diagnostics are safe and effective. Regulators are also collaborating internationally to expedite diagnostics for high-need regions. Harmonised standards, regulatory frameworks, and approval processes are essential to ensure consistent quality and safety across regions and facilitate faster development and global access. This Series paper explores the regulatory challenges in infectious disease and antimicrobial resistance diagnostics, focusing on the UK's response and the broader global efforts to address these issues.

Perception of health workers and assessment of tree spp. Composition in adeoyo general hospital, ibadan, oyo state

Trees as a crucial component of forest play a vital role in providing a wide range of products and services including health benefits. The lack of information on tree species composition and diversity around public health care facilities in Ibadan may hinder comprehensive understanding of the ecological value and potential benefits that trees provide to the surrounding environment and public health care facilities. This study assessed the perceptions of health workers and evaluation of trees within the premises of Adeoyo General Hospital, Ibadan. Forty-nine (49) Structured questionnaire was used to derive the perceptions, while total enumeration of all the trees with diameter at breast height (DBH) greater than or equal to 10 cm were identified and enumerated in the study area. Tables and percentages were used to analyze the perception of the health workers while data collected on dbh (cm) and total height (m) were used to compute basal area (m2) and volume (m3). The analysis of socio-demographic data revealed a higher representation of female health workers (61.2%), a concentration of professionals in the 30 to 39 age group (46.9%), and a predominant presence of married individuals with tertiary education. Examining health workers' perceptions, a significant consensus emerges on the positive effects of tree exposure. Workers believed that exposure to trees improve patient clinical outcomes, speeds up recovery, and boosts the immune system (42.9%). There is also recognition of the role of trees in reducing stress levels and enhancing focus for both patients and healthcare workers. The positive correlation between trees around healthcare facilities and increased staff satisfaction is noteworthy. In the study area, Azadirachta indica was the dominant tree species constituting 42.2% of the total population. Terminalia catappa and Gliricidia sepium are also of great significance. Mean diameter, height, basal area, and volume suggest a diverse forest with a wide range of tree sizes. Meliaceae dominated the families with 42.2% while other families like Fabaceae and Combretaceae also contributed to biodiversity and ecological significance. In DBH, Delonix regia had the highest value of 198.3cm while Newbouldia laevis had 15.1 cm as the lowest value. Antiaris africana and Azadirachta indica both had the maximum values of 19.8 m and 51.8 m3 in height and basal area respectively. Species diversity indices indicated a diverse forest ecosystem with 13 identified taxa and 64 individuals. The diversity index (Shannon-Wienner) of 1.89 - though it is low- is within the general limit for tropical forests. It is therefore recommended that integration and management of green spaces in healthcare facility design, development of employee wellness programs, promoting nature exposure, educational initiatives on the benefits of nature and economic valuation studies should be greatly considered.

Photoinduced Pd-Catalyzed Direct Sulfonylation of Allylic C-H Bonds.

Allylic sulfones are valuable motifs due to their medicinal and biological significance and their versatile chemical reactivities. While direct allylic C-H sulfonylation represents a straightforward and desirable approach, these methods are primarily restricted to terminal alkenes, leaving the engagement of the internal counterparts a formidable challenge. Herein we report a photocatalytic approach that accommodates both cyclic and acyclic internal alkenes with diverse substitution patterns and electronic properties. Importantly, the obtained allylic sulfones can be readily diversified into a wide range of products, thus enabling formal alkene transposition and all-carbon quaternary center formation through the sequential C-H functionalization.

Photoinduced Pd‐Catalyzed Direct Sulfonylation of Allylic C−H Bonds

AbstractAllylic sulfones are valuable motifs due to their medicinal and biological significance and their versatile chemical reactivities. While direct allylic C−H sulfonylation represents a straightforward and desirable approach, these methods are primarily restricted to terminal alkenes, leaving the engagement of the internal counterparts a formidable challenge. Herein we report a photocatalytic approach that accommodates both cyclic and acyclic internal alkenes with diverse substitution patterns and electronic properties. Importantly, the obtained allylic sulfones can be readily diversified into a wide range of products, thus enabling formal alkene transposition and all‐carbon quaternary center formation through the sequential C−H functionalization.

Comprehensive analysis of particulate matter, gaseous pollutants, and microbiological contamination in an international chain supermarket

Indoor environmental quality is of utmost importance since urban populations spend a large proportion of their life in confined spaces. Supermarkets offer a wide range of products and services that are prone to emitting several air pollutants. This study aimed to perform a comprehensive characterisation of the indoor and outdoor air quality in a multinational supermarket, encompassing not only criteria parameters but also unregulated pollutants of concern. Monitoring included measurements of comfort parameters, CO2, multiple gaseous pollutants, particulate matter (PM10) and bioburden. PM10, volatile organic compounds (VOCs) and carbonyls were subject to chemical speciation. Globally, the supermarket presented CO2, VOCs, and PM10 values below the limits imposed by international regulations. The PM10 concentration in the supermarket was 33.5 ± 23.2 μg/m3, and the indoor-to-outdoor PM10 ratio was 1.76. Carbonaceous constituents represented PM10 mass fractions of 21.6% indoors and 15.3% outdoors. Due to the use of stainless-steel utensils, flour and fermentation processes, the bakery proved to be a pollution hotspot, presenting the highest concentrations of PM10 (73.1 ± 9.16 μg/m3), PM10-bound elements (S, Cl, K, Ca, Ti, and Cr) and acetaldehyde (42.7 μg/m3). The maximum tetrachloroethylene level (130 μg/m3) was obtained in the cleaning products section. The highest values of colony-forming units of bacteria and fungi were recorded in the bakery, and fruit and vegetable section. The most prevalent fungal species was Penicillium sp., corresponding to 56.9% of the total colonies. In addition, other fungal species/sections with toxicological or pathogenic potential were detected (Aspergillus sections Aspergilli, Circumdati, Flavi, Mucor and Fusarium sp.).

Potential of silk proteins in cosmetics

Synthetic and inorganic chemical ingredients in cosmetic products pose serious health impacts on skin and hair. Much emphasis has been laid on the development of cost-effective, eco-friendly and user-friendly cosmetic products from time to time. Manufacturing cosmetics using natural ingredients is considered as a viable alternative to overcome the side effects of synthetics. Silk is a natural biopolymer obtained from cocoons of sericigenous insects like silkworms. It constitutes two proteins, viz., fibroin and sericin. Fibroin is the central core protein glued with sericin protein forming silken cocoons together. Both the proteins possess remarkable attributes viz, anti-microbial, anti-oxidant, anti-tyrosinase activity, efficient UV resistance, kinase activity, excellent release and absorption of moisture. The silk protein attributes are advantageous for body skin, hair and nails. It possesses a wide range of cosmetic applications such as facilitation of hair growth, improvement in softening and lustre of hair, rejuvenation of body and skin cells, UVB protection, prevention of chapping and brittleness of nails, and skin brightening. Due to its low molecular weight, easily penetrates the hair strands and skin cells, binds the keratin in hair and forms a protective layer to prevent moisture loss. A wide range of products have been developed for use in cosmetics viz., SILKPRO, SILKALL, SILKPRO 1000. These products are used as natural ingredients due to their potent applications in cosmetics. The cosmetic industry can be developed by proper utilization of silk in its organic products while promoting value addition to sericulture industry.

Synthesis of Non-canonical Tryptophan Variants via Rh-catalyzed C-H Functionalization of Anilines.

Tryptophan and its non-canonical variants play critical roles in pharmaceutical molecules and various enzymes. Facile access to this privileged class of amino acids from readily available building blocks remains a long-standing challenge. Here, we report a regioselective synthesis of non-canonical tryptophans bearing C4-C7 substituents via Rh-catalyzed annulation between structurally diverse tert-butyloxycarbonyl (Boc)-protected anilines and alkynyl chlorides readily prepared from amino acid building blocks. This transformation harnesses Boc-directed C-H metalation and demetalation to afford a wide range of C2-unsubstituted indole products in a redox-neutral fashion. This umpolung approach compared to the classic Larock indole synthesis offers a novel mechanism for heteroarene annulation and will be useful for the synthesis of natural products and drug molecules containing non-canonical tryptophan residues in a highly regioselective manner.

Nickel-Catalyzed Reductive Alkenylation of Enol Derivatives: A Versatile Tool for Alkene Construction.

ConspectusKetone-to-alkene transformations are essential in organic synthesis, and transition-metal-catalyzed cross-coupling reactions involving enol derivatives have become powerful tools to achieve this goal. While substantial progress has been made in nucleophile-electrophile reactions, recent developments in nickel-catalyzed reductive alkenylation reactions have garnered increasing attention. These methods accommodate a broad range of functional groups such as aldehyde, ketone, amide, alcohol, alkyne, heterocycles, and organotin compounds, providing an efficient strategy to access structurally diverse alkenes. This Account primarily highlights the contributions from our laboratory to this growing field while also acknowledging key contributions from other researchers.Our early efforts in this area focused on coupling radical-active substrates, such as α-chloroboronates. This method follows the conventional radical chain mechanism, resulting in facile access to valuable allylboronates. Encouraged by these promising results, we subsequently expanded the substrate scope to encompass radical-inactive compounds. By developing new strategies for controlling cross-selectivity, we enabled the coupling of Csp3 electrophiles (e.g., alcohols and sulfonates), Csp2 electrophiles (e.g., bromoalkenylboronates and acyl fluorides), and heavier group-14 electrophiles like chlorosilanes and chlorogermanes with alkenyl triflates. These advances have provided efficient synthetic routes to a wide range of valuable products, including aliphatic alkenes, enones, dienylboronates, and silicon- and germanium-containing alkenes. Notably, these methods are particularly effective for synthesizing functionalized cycloalkenes, which are traditionally challenging to obtain through conventional methods involving alkenyl halide or organometallic couplings. We have also extended the scope of enol derivatives from triflates to acetates. These compounds are among the most accessible, stable, cost-effective, and environmentally friendly reagents, while their application in cross-coupling has been hampered by low reactivity and selectivity challenges. We showcased that by the use of a Ni(I) catalyst, alkenyl acetates could undergo reductive alkylation with a broad range of alkyl bromides, yielding diverse cyclic and acyclic aliphatic alkenes.Furthermore, our work has demonstrated that reductive coupling of enol derivatives with alkenes provides a highly appealing alternative for alkene synthesis. Particularly, this approach offers opportunity to address the regioselectivity challenges encountered in conventional alkene transformations. For instance, achieving regioselective hydrocarbonation of aliphatic 1,3-dienes has been a longstanding challenge in synthetic chemistry. By using a phosphine-nitrile ligand, we developed a nickel-catalyzed reductive alkenylation of 1,3-dienes with alkenyl triflates, delivering a diverse array of 1,4-dienes with high 1,2-branch selectivity (>20:1) while preserving the geometry of the C3-C4 double bond. Additionally, our investigations laid the foundation for enantioselective reductive alkenylation methodologies, offering new pathways for constructing enantioenriched diketones as well as complex carbo- and heterocyclic compounds. The introduced alkenyl functionality can be further diversified, enhancing molecular diversity and complexity.

Engineering peroxisomal surface display for enhanced biosynthesis in the emerging yeast Kluyveromyces marxianus

The non-conventional yeast Kluyveromyces marxianus is a promising microbial host for industrial biomanufacturing. With the recent development of Cas9-based genome editing systems and other novel synthetic biology tools for K. marxianus, engineering of this yeast has become far more accessible. Enzyme colocalization is a proven approach to increase pathway flux and the synthesis of non-native products. Here, we engineer K. marxianus to enable peroxisomal surface display, an enzyme colocalization technique for displaying enzymes on the peroxisome membrane via an anchoring motif from the peroxin Pex15. The native KmPex15 anchoring motif was identified and fused to GFP, resulting in successful localization to the surface of the peroxisomes. To demonstrate the advantages for pathway localization, the Pseudomonas savastanoi IaaM and IaaH enzymes were co-displayed on the peroxisome surface; this increased production of indole-3-acetic acid 7.9-fold via substrate channeling effects. We then redirected pathway flux by displaying the violacein pathway enzymes VioE and VioD from Chromobacterium violaceum, increasing selectivity of proviolacein to prodeoxyviolacein by 2.5-fold. Finally, we improved direct access to peroxisomal acetyl-CoA and increased titers of the polyketide triacetic acid lactone (TAL) by 2-fold through concurrent display of the proteins Cat2, Acc1, and the type III PKS 2-pyrone synthase from Gerbera hybrida relative to the same three enzymes diffusing in the cytosol. We further improved TAL production by up to 2.1-fold through engineering peroxisome morphology and lifespan. Our findings demonstrate that peroxisomal surface display is an efficient enzyme colocalization strategy in K. marxianus and applicable for improving production of a wide range of non-native products.

Designing a whole-cell biosensor applicable for S-adenosyl-l-methionine-dependent methyltransferases

This study was undertaken to develop a high-throughput screening strategy using a whole-cell biosensor to enhance methyl-group transfer, a rate-limiting step influenced by intracellular methyl donor availability and methyltransferase efficiency. An l-homocysteine biosensor was designed based on regulatory protein MetR from Escherichia coli, which rapidly reported intracellular l-homocysteine accumulation resulted from S-adenosyl-l-homocysteine (SAH) formation after methyl-group transfer. Using S-adenosyl-l-methionine (SAM) as a methyl donor, this biosensor was applied to caffeic acid 3-O-methyltransferase derived from Arabidopsis thaliana (AtComT). After several rounds of directed evolution, the modified enzyme achieved a 13.8-fold improvement when converting caffeic acid to ferulic acid. The best mutant exhibited a 5.4-fold improvement in catalytic efficiency. Characterization of beneficial mutants showed that improved O-methyltransferase dimerization greatly contributed to enzyme activity. This finding was verified when we switched and compared the N-termini involved in dimerization across different sources. Finally, with tyrosine as a substrate, the evolved AtComT mutant greatly improved ferulic acid biosynthesis, yielding 3448 mg L−1 with a conversion rate of 88.8%. These results have important implications for high-efficiency O-methyltransferase design, which will greatly benefit the biosynthesis of a wide range of natural products. In addition, the l-homocysteine biosensor has the potential for widespread applications in evaluating the efficiency of SAM-based methyl transfer.

Using Cupriavidus necator H16 to Provide a Roadmap for Increasing Electroporation Efficiency in Nonmodel Bacteria.

Bacteria are a treasure trove of metabolic reactions, but most industrial biotechnology applications rely on a limited set of established host organisms. In contrast, adopting nonmodel bacteria for the production of various chemicals of interest is often hampered by their limited genetic amenability coupled with their low transformation efficiency. In this study, we propose a series of steps that can be taken to increase electroporation efficiency in nonmodel bacteria. As a test strain, we use Cupriavidus necator H16, a lithoautotrophic bacterium that has been engineered to produce a wide range of products from CO2 and hydrogen. However, its low electroporation efficiency hampers the high-throughput genetic engineering required to develop C. necator into an industrially relevant host organism. Thus, conjugation has often been the method of choice for introducing exogenous DNA, especially when introducing large plasmids or suicide plasmids. We first propose a species-independent technique based on natively methylated DNA and Golden Gate assembly to increase one-pot cloning and electroporation efficiency by 70-fold. Second, bioinformatic tools were used to predict defense systems and develop a restriction avoidance strategy that was used to introduce suicide plasmids by electroporation to obtain a domesticated strain. The results are discussed in the context of metabolic engineering of nonmodel bacteria.

Genomic Characterization of Lactiplantibacillus plantarum Strains: Potential Probiotics from Ethiopian Traditional Fermented Cottage Cheese.

Lactiplantibacillus plantarum is a species found in a wide range of ecological niches, including vegetables and dairy products, and it may occur naturally in the human gastrointestinal tract. The precise mechanisms underlying the beneficial properties of these microbes to their host remain obscure. Although Lactic acid bacteria are generally regarded as safe, there are rare cases of the emergence of infections and antibiotic resistance by certain probiotics. An in silico whole genome sequence analysis of putative probiotic bacteria was set up to identify strains, predict desirable functional properties, and identify potentially detrimental antibiotic resistance and virulence genes. We characterized the genomes of three L. plantarum strains (54B, 54C, and 55A) isolated from Ethiopian traditional cottage cheese. Whole-genome sequencing was performed using Illumina MiSeq sequencing. The completeness and quality of the genome of L. plantarum strains were assessed through CheckM. Analyses results showed that L. plantarum 54B and 54C are closely related but different strains. The genomes studied did not harbor resistance and virulence factors. They had five classes of carbohydrate-active enzymes with several important functions. Cyclic lactone autoinducer, terpenes, Type III polyketide synthases, ribosomally synthesized and post-translationally modified peptides-like gene clusters, sactipeptides, and all genes required for riboflavin biosynthesis were identified, evidencing their promising probiotic properties. Six bacteriocin-like structures encoding genes were found in the genome of L. plantarum 55A. The lack of resistome and virulome and their previous functional capabilities suggest the potential applicability of these strains in food industries as bio-preservatives and in the prevention and/or treatment of infectious diseases. The results also provide insights into the probiotic potential and safety of these three strains and indicate avenues for further mechanistic studies using these isolates.

Financial Development of Disney: Analyzing Box Office Revenue, Derivative Products, and Audience Demographics

Disney is known around the world for its unique animated films, theme parks and classic characters. Through continuous innovation and development, Disney has combined The traditional art of animation with modern technology to create many classic animated films such as "The Lion King," "Frozen" and "Beauty and the Beast."This paper explores Disney's success factors in terms of box office revenue, derivative products, and audience demographiAnalyzingzing relevant literature and it summarizes how Disney has solidified its leading position in the global entertainment industry through high-grossing films, a wide range of derivative products, and precise market positioning. The study reveals that Disney's continuous innovation and market adaptation, including the introduction of new content and diverse products, have successfully attracted audiences of all ages. The paper also provides recommendations for further enhancing Disney's market position and audience engagement, such as investing in original content, emphasizing diversity and inclusivity, and expanding digital and interactive experiences.

Accelerated Prediction of Phase Behavior for Block Copolymer Libraries Using a Molecularly Informed Field Theory.

Solution formulations involving polymers are the basis for a wide range of products spanning consumer care, therapeutics, lubricants, adhesives, and coatings. These multicomponent systems typically show rich self-assembly and phase behavior that are sensitive to even small changes in chemistry and composition. Longstanding computational efforts have sought techniques for predictive modeling of formulation structure and thermodynamics without experimental guidance, but the challenges of addressing the long time scales and large length scales of self-assembly while maintaining chemical specificity have thwarted the emergence of general approaches. As a consequence, current formulation design remains largely Edisonian. Here, we present a multiscale modeling approach that accurately predicts, without any experimental input, the complete temperature-concentration phase diagram of model diblock polymers in solution, as established postprediction through small-angle X-ray scattering. The methodology employs a strategy whereby atomistic molecular dynamics simulations is used to parametrize coarse-grained field-theoretic models; simulations of the latter then easily surmount long equilibration time scales and enable rigorous determination of solution structures and phase behavior. This systematic and predictive approach, accelerated by access to well-defined block copolymers, has the potential to expedite in silico screening of novel formulations to significantly reduce trial-and-error experimental design and to guide selection of components and compositions across a vast range of applications.

Plataforma web y móvil para la difusión de ofertas de PYMES mediante geolocalización

The project focuses on developing a Fremium digital business in SMEs through a web and mobile platform that allows businesses to effectively and accessibly register and showcase their products and promotions, reaching potential buyers in real-time. Through this application, companies can create detailed profiles that include images and descriptions of their products, as well as contact details and ongoing promotions. This not only facilitates the visibility of their offers to a broader user base but also enables affiliated businesses to have better control over their offers. On the other hand, app users enjoy the convenience of exploring a wide range of products and offers in one place; they can search, compare, and access detailed information about the products and services offered by various companies. Additionally, the app provides users with real-time updates and geolocation on promotions and discounts, enhancing their shopping experience. In this way, the platform optimizes the connection between businesses and users, providing the former with a platform to promote their products and the latter with a tool to discover and access a variety of offers and services, all through a user-friendly and practical mobile and web plataform.

Assessment of a LPG hybrid solar dryer assisted with smart air circulation system for drying basil leaves

The fluctuation of solar radiation throughout the day presents a significant obstacle to the widespread adoption of solar dryers for the dehydration of agricultural products, particularly those that are sensitive to high temperatures, such as basil leaf drying during the winter season. Consequently, this recent study sought to address the limitations of solar-powered dryers by implementing a hybrid drying system that harnesses both solar energy and liquid petroleum gas (LPG). Furthermore, an innovative automatic electronic unit was integrated to facilitate the circulation of air between the drying chamber and the ambient environment. Considering the solar radiation status in Egypt, an LPG hybrid solar dryer has been developed to be suitable for both sunny and cloudy weather conditions. This hybrid solar dryer (HSD) uses indirect forced convection and a controlled auxiliary heating system (LPG) to regulate both temperature and relative humidity, resulting in increased drying rates, reduced energy consumption, and the production of high-quality dried products. The HSD was tested and evaluated for drying basil leaves at three different temperatures of50, 55, and 60 °C and three air changing rates of 70, 80, and 90%, during both summer and winter sessions. The obtained results showed that drying basil at a temperature of 60 °C and an air changing rate of 90% led to a decrease in the drying time by about 35.71% and 35.56% in summer and winter, respectively, where summer drying took 135–210 min and winter drying took 145–225 min to reach equilibrium moisture content (MC). Additionally, the effective moisture diffusivity ranged from 5.25 to 9.06 × 10− 9 m2/s, where higher values of effective moisture diffusivity (EMD) were increased with increasing both drying temperatures and air change rates. Furthermore, the activation energy decreased from 16.557 to 25.182 kJ/mol to 1.945–15.366 kJ/mol for the winter and summer sessions, respectively. On the other hand, the analysis of thin-layer kinetic showed that the Modified Midilli II model has a higher coefficient of determination R2, the lowest χ2, and the lowest root mean square error (RMSE) compared to the other models of both winter and summer sessions. Finally, the LPG hybrid solar dryer can be used for drying a wide range of agricultural products, and it is more efficient for drying medicinal plants. This innovative dryer utilizes a combination of LPG and solar energy, making it efficient and environmentally friendly.

Phytoremediation of lead polluted mine soil by synergistic effect of chelating agents and nitrogen in hemp

Industrial hemp is a valuable fibrous plant with high biomass production for it can survive under variable environmental stresses including heavy metals and is used in a wide range of products. This research work aimed at determining the growth potential of industrial hemp (Cannabis sativa) developed on lead (Pb) contaminated mine soils using various chelating agents viz., ethylenediaminedisuccinic acid (EDDS), ethylenediaminetetraacetic acid (EDTA), citric acid (CA) and nitrilotriacetic acid (NTA) under various concentrations of nitrogen (N) fertilizer such as 0 (control), 50, 150, 250 and 350 kg ha−1. Results indicated that the synergistic effect of chelating agents and rising concentrations of N fertilizer resulted in a linear increase in hemp growth and dry biomass. The chelating agent and N mediated showed better response in the photosynthetic, antioxidative, and osmolytic potential of hemp as compared with control. The concentration of N and Pb plants showed a differential response such as N accumulation was maximum in plant leaf and shoot portions as compared to the roots. In contrast, Pb enrichment was higher in the roots than in the plant’s leaves and stems when exposed to varying concentrations of N fertilizer and chelating agents in the soil environment. Biomobilizaiton of Pb in the plant continuum enhanced with the rising N fertilizer levels in the soil. The EDTA showed better phytoextraction potential as compared with the rest of the chelating agents. Hence, findings suggest that the synergistic application of chelating agents and N fertilizer is a far more effective technique that increases the bioavailability of Pb for phytoextraction and decreases Pb-induced oxidative injuries by restricting Pb uptake.

Comprehensive Review of Biomass Pyrolysis: Conventional and Advanced Technologies, Reactor Designs, Product Compositions and Yields, and Techno-Economic Analysis

Pyrolysis is an environmentally friendly and efficient method for converting biomass into a wide range of products, including fuels, chemicals, fertilizers, catalysts, and sorption materials. This review confirms that scientific research on biomass pyrolysis has remained strong over the past 10 years. The authors examine the operating conditions of different types of pyrolysis, including slow, intermediate, fast, and flash, highlighting the distinct heating rates for each. Furthermore, biomass pyrolysis reactors are categorized into four groups, pneumatic bed reactors, gravity reactors, stationary bed reactors, and mechanical reactors, with a discussion on each type. The review then focuses on recent advancements in pyrolysis technologies that have improved efficiency, yield, and product quality, which, in turn, support sustainable energy production and effective waste management. The composition and yields of products from the different types of pyrolysis have been also reviewed. Finally, a techno-economic analysis has been conducted for both the pyrolysis of biomass alone and the co-pyrolysis of biomass with other raw materials.