Walker Lane Belt Research Articles

Evolution of slip partitioning in a major continental margin strike-slip fault system during a transition to oblique plate-margin tectonics: Insight into the evolution of the Garlock fault zone, California (USA)

Abstract The Walker Lane belt and Eastern California shear zone of California, USA, are active, plate boundary–related dextral systems with transtensional and transpressional deformation, respectively. They are separated by the sinistral Garlock fault, creating a complex system without an overall integrated formation and evolution model. We examine the deformation within the eastern segment of the Garlock fault zone over geologic timescales by determining the slip history of faults. We assess the progression of faulting and associated deformation along the WSW-striking Garlock fault zone and how it applies to the overall NNW-directed dextral system. Previous studies found that large synthetic fault strands take up 30% of the slip of the Garlock fault zone and have proposed multiple mechanisms to explore how to accommodate regional NNW-directed shear across the Garlock fault without cutting its trace. We analyze an unstudied section of faulting in one of the more complex areas of regional deformation via compiled and reinterpreted published geologic data for an analysis of total and incremental slip on the main faults of the eastern Garlock fault zone. We identify geologic offset features to interpret total slip, timing, and deformation evolution. We find that 30% of the total slip of the Garlock zone occurs on strands other than the Garlock fault sensu stricto, with the locus of main slip sidestepping during the evolution of accommodation of throughgoing, regional dextral shear. Our results support ideas of the creation and evolution of the regional dextral system via stress concentration on a sub-Garlock lithospheric anisotropy with a resulting lowering of the plastic yield stress. Our results also show an eastward increase in fault system complexity, which may imply an underappreciated seismic hazard of the eastern Garlock fault zone.

Geologic map of Slate Range Crossing area, California, USA

This detailed geologic map and supplemental digital data set1 examine and demonstrate the complex Neogene–Quaternary deformation in the Slate Range Crossing area (California, USA) of the active dextral transtension of the Death Valley region and Walker Lane belt. This map integrates the late Cenozoic structures and geologic units with the Mesozoic geologic units and deformation as a data set to examine the controls on reactivation of older structures. These geologic data were collected to study pre-, syn-, and post-kinematic rocks to examine the deformation history of the area and to find palinspastic markers to examine the late Cenozoic fault displacement and displacement history across Panamint Valley to the east, as reported in Andrew and Walker (2009). The study focused on defining the Miocene and Pliocene rocks and deposits and examining lateral changes and depositional sources of clasts. There are two different volcanic-sedimentary sequences in this area. A Miocene section contains mafic to felsic volcanic units, numerous debris-flow to laharic deposits, and several associated conglomerates and breccias containing exotic clasts. The exotic clasts are matched to rocks in the Panamint Range on the east side of Panamint Valley as reported in Andrew and Walker (2009) as displacement vectors for palinspastic reconstructions. These Miocene strata ubiquitously dip eastward 20–40º. A younger volcanic-sedimentary sequence contains relatively thin mafic lava flows and associated locally derived, coarse-grained mass wasting deposits. These younger basaltic lavas generally have gentle dipping lava flow features and foliation. Numerous faults cut the different age deposits allowing a chronology of Neogene to Quaternary faulting; additionally, there are numerous fabrics associated with Jurassic contraction and Cretaceous(?) dextral shear. The area near Slate Range Crossing has a conspicuous zone of earthquake foci; this study found that some of this seismic activity coincides with a zone of southwest-striking, moderately dipping to the north, sinistral-oblique normal faults, which cut across the northernmost Slate Range. These faults form a structural boundary between the Argus and Slate Ranges and link the fault networks in Panamint Valley with those in Searles Valley. This mapping and structural data demonstrate the two-stage Neogene fault history of the Walker Lane belt deformation in this area and show that regional tilting of rocks occurred after ca. 13 Ma and before ca. 4 Ma; this eastward down-tilting appears to be a discrete event and may mark the change from extension to transtension. This detailed geologic mapping and collection of structural data for the rocks in the eastern Argus and northern Slate Ranges and Panamint Valley were created using digital in-the-field geographic information systems software running on a field-hardened laptop computer. This map is a simplification of detailed geologic mapping data collected at 1:6000 scale and reduced to 1:20000 scale. Structural data includes kinematic and relative timing of deformation information.

Geologic map of southern Panamint Valley, southern Panamint Range, and central Slate Range, California, USA

Abstract This detailed geologic map and supplemental digital data set1 examine and demonstrate the complex deformational history and reactivation relationships of the southern Panamint Valley area (California, USA), from active transtension of the Walker Lane belt, Miocene extension of the Basin and Range, multiple Mesozoic events related to subduction, and Neoproterozoic extension. This collection of map data focuses on the geometry, kinematics, and relative timing of deformation to understand the deformation history and effects of structural reactivation. Andrew and Walker (2009) used these geologic mapping data to palinspastically restore the Fish Canyon area of the Slate Range to overlapping the western Panamint Range at Goler Wash. Neogene extension and subsequent dextral transtension has created a complex network of faults via partial reactivation of Mesozoic and Neoproterozoic structures and has separated the Slate Range from the Panamint Range. The Neogene fault system changes from south to north from dextral strike-slip along the southern Panamint Valley fault to oblique normal slip along the Emigrant fault at a triple junction with the sinistral-oblique normal Manly Pass fault. The Mesozoic deformation history is different in the two ranges across Panamint Valley. The Slate Range was the hanging wall to Jurassic and Cretaceous contractional deformation; this same deformation in the Panamint Range to the east was localized along the western range flank with the majority of the Panamint Range thus being in the footwall to Mesozoic contraction. The western Panamint Range preserves migmatitic fabrics and deformation due to Jurassic contraction and plutonism. The Goldbug fault, along the western Panamint Range, places Paleoproterozoic to Mesoproterozoic rocks over Neoproterozoic to Cretaceous rocks. Jurassic contraction has top-to-the-northeast relative transport and the more discrete Cretaceous thrust faulting in the Panamint Range has top-to-the-east transport. The Butte Valley fault, previously recognized farther north of the map area in the Panamint Range, cuts Late Jurassic rocks and structures. Neoproterozoic to Cambrian sedimentary rocks with top-to-the-northeast contractional deformation occur as relative down-dropped block exposed east of the Butte Valley fault. The Butte Valley fault continues southward and is then deflected by Late Cretaceous thrust faulting on the Goldbug fault. Neoproterozoic deformation is more difficult to discern but is hypothesized to relate to abundant olistostromes mapped within the Kingston Peak Formation in the Panamint Range (i.e., Prave, 1999). This detailed geologic mapping and collection of structural data for the rocks in the southern Panamint Valley area were created using digital in-the-field geographic information systems software running on a field-hardened laptop computer. This map is a simplification of detailed geologic mapping data collected at 1:6000 scales and reduced to 1:20000 scale. Structural data includes kinematic and relative timing of deformation information.

Geologic map of central Panamint Range, California, USA

This detailed geologic map and supplemental digital data set1 examine and demonstrate the complex deformational history and reactivation relationships of the Panamint Range (California, USA), from active transtension of the Walker Lane belt, Miocene extension of the Basin and Range, to multiple Mesozoic events related to subduction, and Neoproterozoic extension. This collection of map data focuses on the geometry, kinematics, and relative timing of deformation to understand the deformation history and effects of structural reactivation. A minor portion of this geologic mapping data was presented in the analysis and figures of Andrew and Walker (2009). The Neogene extension and subsequent dextral transtension deformation has created a complex network of faults via partial reactivation of Mesozoic and Neoproterozoic structures. Structural data show oblique normal slip overprinting earlier normal slip along the western range flank fault of the western Panamint Range. Jurassic and Cretaceous deformation is localized along the western range on the Goldbug fault. The hanging wall of this fault preserves migmatitic fabrics and intense deformation due to Jurassic contraction. The Goldbug fault places Paleoproterozoic to Mesoproterozoic rocks over Neoproterozoic rocks. The Jurassic contraction has top-to-the-northeast relative transport and the more discrete Cretaceous thrust faulting has top-to-the-east transport. A set of Late Cretaceous plutonic rocks and mylonitic gneisses derived from them, occur along the Goldbug fault and demonstrate the reactivated nature of this fault in the Late Cretaceous. New data for the Butte Valley fault show that this fault cuts Late Jurassic plutonic rocks and has normal slip. The Butte Valley fault ends northward at the linked sinistral slip Warm Spring Canyon fault, which was previously interpreted to be an intrusive contact. A previously unrecognized rim syncline structure occurs along the boundary of the Late Jurassic Manly Peak quartz monzonite. Neoproterozoic deformation is difficult to discern due to the overprinting deformations. Numerous Neoproterozoic deformation-related mass wasting deposits can be seen within this formation, including a set of conspicuous allochthonous deposits and clasts of older Beck Spring Dolomite that appear to be frozen in the process of breaking away from intact, normal thickness beds in the Surprise–Happy Canyons divide. This detailed geologic mapping and collection of structural data for the rocks in the central Panamint Range were created using digital in-the-field geographic information systems software running on a field-hardened laptop computer combined with an earlier set of field data that were digitized into the digital georeferenced database. This map is a simplification of detailed geologic mapping data collected at 1:2000–1:6000 scales and reduced to 1:20000 scale. Structural data include kinematic and relative timing of deformation information.

Seismic and Geodetic Analysis of Rupture Characteristics of the 2020 Mw 6.5 Monte Cristo Range, Nevada, Earthquake

ABSTRACT The largest earthquake since 1954 to strike the state of Nevada, United States, ruptured on 15 May 2020 along the Monte Cristo range of west-central Nevada. The Mw 6.5 event involved predominantly left-lateral strike-slip faulting with minor normal components on three aligned east–west-trending faults that vary in strike by 23°. The kinematic rupture process is determined by joint inversion of Global Navigation Satellite Systems displacements, Interferometric Synthetic Aperture Radar (InSAR) data, regional strong motions, and teleseismic P and SH waves, with the three-fault geometry being constrained by InSAR surface deformation observations, surface ruptures, and relocated aftershock distributions. The average rupture velocity is 1.5 km/s, with a peak slip of ∼1.6 m and a ∼20 s rupture duration. The seismic moment is 6.9×1018 N·m. Complex surface deformation is observed near the fault junction, with a deep near-vertical fault and a southeast-dipping fault at shallow depth on the western segment, along which normal-faulting aftershocks are observed. There is a shallow slip deficit in the Nevada ruptures, probably due to the immature fault system. The causative faults had not been previously identified and are located near the transition from the Walker Lane belt to the Basin and Range province. The east–west geometry of the system is consistent with the eastward extension of the Mina Deflection of the Walker Lane north of the White Mountains.

Geodetic Observation and Modeling of the Coseismic and Postseismic Deformations Associated With the 2020 Mw 6.5 Monte Cristo Earthquake

AbstractThe 2020 Mw 6.5 Monte Cristo earthquake occurred in the northeastern Mina deflection of the central Walker Lane Belt (WLB) in Nevada, USA. The Mina deflection represents a typical stepover zone that transfers the dextral slip in the northern Eastern California Shear Zone onto the dextral faults in the central WLB. The Monte Cristo earthquake provides a rare opportunity to investigate the strain accumulation and stress transition mechanisms in the WLB. In this study, ascending and descending Sentinel‐1 images were utilized to generate coseismic and early postseismic deformations associated with this earthquake. Combined with global positioning system measurements, these images were inverted for the coseismic slip and afterslip of the Monte Cristo earthquake. The preferred coseismic slip model suggests that the causative fault is characterized by two fault segments with southward dips of 64° and 79°. The coseismic rupture was dominated by sinistral slip with obvious normal slip components in the western segment of the source fault. The coseismic slip was mainly concentrated in the 3–12 km depth range and decreased at shallower depths, suggesting a moderate amount of shallow coseismic slip deficit. Rapid afterslip was mainly confined to the 0–3 km depth range, largely compensating for the shallow slip deficit caused by the mainshock. The widely distributed normal slips in the northeastern Mina deflection revealed by the Monte Cristo earthquake suggest the transtensional model is more applicable due to its ability to account for the slip transition kinematics in the Mina deflection.

Active dextral strike-slip faulting records termination of the Walker Lane belt at the southern Cascade arc in the Klamath graben, Oregon, USA

Active dextral strike-slip faulting records termination of the Walker Lane belt at the southern Cascade arc in the Klamath graben, Oregon, USA

Path and amount of dextral fault slip in the Eastern California shear zone across the central Mojave Desert

New total fault slip estimates for the central Mojave Desert portion of the Eastern California shear zone support through-going dextral shear of ∼18 km that is transferred northward to the Garlock fault. The Eastern California shear zone accommodates ∼25% of the plate-boundary shear, with the transversely oriented Garlock fault forming its northern boundary with the Walker Lane belt. Total fault slip estimates for the major faults in the central Mojave Desert were determined using detailed geologic mapping supplemented with aeromagnetic data. Offset data for the Blackwater fault show a consistent 1.8 ± 0.1 km of dextral slip along 55 km of strike length, and they indicate that slip initiated at or after 3.8 Ma. The faults adjacent to the Blackwater fault have dextral slip of: 4.8 ± 0.3 km (Harper Lake fault); 2.9 ± 0.5 km (Mount General fault); 1.0 ± 0.7 km (Lockhart fault); and 3.2 ± 0.3 and 0.53 ± 0.05 km (Paradise fault). These slip data augment published data for the central Mojave Desert and allow evaluation of the strain path in the central Mojave Desert, showing consistent along-strike, through-going dextral slip. Contractional and extensional step-overs in the central Mojave Desert accommodate a change from focused slip in the southern central Mojave Desert to a wider and more dispersed fault system northward with a shift in the locus of dextral shear westward. We interpret these changes in the fault system to be a response to the Garlock fault, which inhibits through-going faulting but allows through-going dextral shear via clockwise deflection of its trace.

Progressive derangement of ancient (Mesozoic) east-west Nevadaplano paleochannels into modern (Miocene–Holocene) north-northwest trends in the Walker Lane Belt, central Sierra Nevada

Progressive derangement of ancient (Mesozoic) east-west Nevadaplano paleochannels into modern (Miocene–Holocene) north-northwest trends in the Walker Lane Belt, central Sierra Nevada

Identifying block structure in the Pacific Northwest, USA

AbstractWe have identified block structure in the Pacific Northwest (west of 116°W between 38°N and 49°N) by clustering GPS stations so that the same Euler vector approximates the velocity of each station in a cluster. Given the total number k of clusters desired, the clustering procedure finds the best assignment of stations to clusters. Clustering is calculated for k = 2–14. In geographic space, cluster boundaries that remain relatively stable as k is increased are tentatively identified as block boundaries. That identification is reinforced if the cluster boundary coincides with a geologic feature. Boundaries identified in Northern California and Nevada are the Central Nevada Seismic Belt, the west side of the Northern Walker Lane Belt, and the Bartlett Springs Fault. Three blocks cover all of Oregon and Washington. The principal block boundary there extends west‐northwest along the Brothers Fault Zone, then north and northwest along the eastern boundary of Siletzia, the accreted oceanic basement of the forearc. East of this boundary is the Intermountain block; its eastern boundary undefined. A cluster boundary at Cape Blanco subdivides the forearc along the faulted southern margin of Siletzia. South of Cape Blanco, the Klamath Mountains‐Basin and Range block, extends east to the Central Nevada Seismic Belt and south to the Sierra Nevada‐Great Valley block. The Siletzia block, north of Cape Blanco, coincides almost exactly with the accreted Siletz terrane. The cluster boundary in the eastern Olympic Peninsula may mark permanent shortening of Siletzia against the Intermountain block.

New constraints on fault architecture, slip rates, and strain partitioning beneath Pyramid Lake, Nevada

A seismic compressed high-intensity radar pulse (CHIRP) survey of Pyramid Lake, Nevada, defines fault architecture and distribution within a key sector of the northern Walker Lane belt. More than 500 line-kilometers of high-resolution (decimeter) subsurface imagery, together with dated piston and gravity cores, were used to produce the first comprehensive fault map and attendant slip rates beneath the lake. A reversal of fault polarity is observed beneath Pyramid Lake, where down-to-the-east slip on the dextral Pyramid Lake fault to the south switches to down-to-the-west displacement on the Lake Range fault to the north. Extensional deformation within the northern two thirds of the basin is bounded by the Lake Range fault, which exhibits varying degrees of asymmetric tilting and stratal divergence due to along-strike segmentation. This structural configuration likely results from a combination of changes in slip rate along strike and the splaying of fault segments onshore. The potential splaying of fault segments onshore tends to shift the focus of extension away from the lake. The combination of normal- and oblique-slip faults in the northern basin gives Pyramid Lake its distinctive “fanning open to the north” geometry. The oblique-slip faults in the northwestern region of the lake are short and discontinuous in nature, possibly representing a nascent shear zone. In contrast, the Lake Range fault is long and well defined. Vertical slip rates measured across the Lake Range and other faults provide new estimates on extension across the Pyramid Lake basin. A minimum vertical slip rate of ∼1.0 mm/yr is estimated along the Lake Range fault. When combined with fault length, slip rates yield a potential earthquake magnitude range between M6.4 and M7.0. Little to no offset on the Lake Range fault is observed in the sediment rapidly emplaced at the end of Tioga glaciation (12.5–9.5 ka). In contrast, since 9.5 ka, CHIRP imagery provides evidence for three or four major earthquakes, assuming a characteristic offset of 2.5 m per event. Regionally, our CHIRP investigation helps to reveal how strain is partitioned along the boundary between the northeastern edge of the Walker Lane and the northwest Basin and Range Province proper.

Evolution of the central Garlock fault zone, California: A major sinistral fault embedded in a dextral plate margin

The Garlock fault is an integral part of the plate-boundary deformation system inboard of the San Andreas fault (California, USA); however, the Garlock is transversely oriented and has the opposite sense of shear. The slip history of the Garlock is critical for interpreting the deformation of the through-going dextral shear of the Walker Lane belt–Eastern California shear zone. The Lava Mountains–Summit Range (LMSR), located along the central Garlock fault, is a Miocene volcanic center that holds the key to unraveling the fault slip and development of the Garlock. The LMSR is also located at the intersection of the NNW-striking dextral Blackwater fault and contains several sinistral WSW-striking structures that provide a framework for establishing the relationship between the sinistral Garlock fault system and the dextral Eastern California shear zone. New field mapping and geochronology data ( 40 Ar/ 39 Ar and U-Pb) show five distinct suites of volcanic-sedimentary rock units in the LMSR overlain by Pliocene exotic-clast conglomerates. This stratigraphy coupled with fifteen fault slip markers define a three-stage history for the central Garlock fault system of 11–7 Ma, 7–3.8 Ma, and 3.8–0 Ma. Pliocene to recent slip occurs in a ~12-km-wide zone and accounts for ~33 km or 51% of the total 64 km of left-lateral offset on the Garlock fault in the vicinity of the LMSR since 3.8 Ma. This history yields slip rates of 6–9 mm/yr for the younger stage and slower rates for older stages. The LMSR internally accommodates northwest-directed dextral slip associated with the Eastern California shear zone–Walker Lane belt via multiple processes of lateral tectonic escape, folding, normal faulting, and the creation of new faults. The geologic slip rates for the Garlock fault in the LMSR match with and explain along-strike variations in neotectonic rates.

Internal deformation of the southern Sierra Nevada microplate associated with foundering lower lithosphere, California

Quaternary faulting and background seismicity in the southern Sierra Nevada microplate are concentrated east and south of the Isabella anomaly, a high-velocity body in the upper mantle interpreted to be lower Sierra lithosphere that is foundering into the asthenosphere. We analyzed seismicity in this region to evaluate patterns of upper crustal deformation above and adjacent to the Isabella anomaly. Earthquakes in the southern Sierra and San Joaquin Valley were relocated using joint hypocentral inversion and double-difference techniques, and groups of focal mechanisms were inverted for the components of a reduced deformation rate tensor. The deformation field derived from this analysis reveals two distinct departures from horizontal plane strain associated with distributed northwest-directed dextral shear east of the Pacific plate: (1) heterogeneous extension and crustal thinning in the high Sierra and western foothills east of the Isabella anomaly; and (2) pronounced counterclockwise rotation of the principal strains from regional trends in the southwestern Sierra Nevada and across the Kern Arch. Based on comparison with a three-dimensional tomographic model, the extension in the southern Sierra is spatially associated with relatively thinner crust and anomalous low P-wave speeds in the upper mantle (40–90 km depth range) directly east of the Isabella anomaly. These relations suggest that seismogenic crustal thinning is localized above upwelling asthenosphere that is replacing foundering lithosphere. Counterclockwise rotation of strain trajectories in the southwest Sierra occurs southeast of the Isabella anomaly, and is associated with seismogenic west-northwest–striking dextral faults. We suggest that the deformation here represents westward encroachment of dextral shear into the microplate from the eastern California shear zone and southern Walker Lane belt. The strain rotation may reflect the presence of local stresses associated with relaxation of subsidence in the vicinity of the Isabella anomaly. Westward propagation of foundering lithosphere, with spatially associated patterns of upper crustal deformation similar to those documented herein, can account for observed late Cenozoic time- and space-transgressive deformation in the southern Walker Lane belt east of the Isabella anomaly, and is a potentially observable consequence of the foundering process in other orogens.

Initiation of Sierra Nevada range front–Walker Lane faulting ca. 12 Ma in the Ancestral Cascades arc

The eastern escarpment of the Sierra Nevada (USA) forms one of the most prominent topographic and geologic features in the Cordillera, yet the timing and nature of fault displacements along it remain relatively poorly known. The central Sierra Nevada range front is an ideal place to determine the structural evolution of the range front because it has abundant dateable Cenozoic volcanic rocks. The Sonora Pass area of the central Sierra Nevada is particularly good for reconstructing the slip history of range-front faults, because it includes unusually widespread and distinctive high-K volcanic rocks (the ca. 11.5–9 Ma Stanislaus Group) that serve as outstanding strain markers. These include the following, from base to top. (1) The Table Mountain Latite (TML) consists of voluminous trachyandesite, trachybasaltic andesite, and basalt lava flows, erupted from fault-controlled fissures in the Sierra Crest graben-vent system. (2) The Eureka Valley Tuff consists of three trachydacite ignimbrite members erupted from the Little Walker caldera. These ignimbrites are interstratified with lava flows that continued to erupt from the Sierra Crest graben-vent system, and include silicic high-K as well as intermediate to mafic high-K lavas. The graben-vent system consists of a single ∼27-km-long, ∼8–10-km-wide approximately north-south graben that is along the modern Sierran crest between Sonora Pass and Ebbetts Pass, with a series of approximately north-south half-grabens on its western margin, and an ∼24-km-wide northeast transfer zone emanating from the northeast boundary of the graben on the modern range front south of Ebbetts Pass. In this paper we focus on the structural evolution of the Sonora Pass segment of the Sierra Nevada range front, which we do not include in the Sierra Crest graben-vent complex because we have found no vents for high-K lava flows here. However, we show that these faults localized the high-K Little Walker caldera. We demonstrate that the range-front faults at Sonora Pass were active before and during the ca. 11.5–9 Ma high-K volcanism. We show that these faults are dominantly approximately north-south down to the east normal faults, passing northward into a system of approximately northeast-southwest sinistral oblique normal faults that are on the southern end of the ∼24-km-wide northeast transfer zone in the Sierra Crest graben-vent complex. At least half the slip on the north-south normal faults on the Sonora Pass range front occurred before and during eruption of the TML, prior to development of the Little Walker caldera. It has previously been suggested that the range-front faults formed a right-stepping transtensional stepover that controlled the siting of the Little Walker caldera; we support that interpretation by showing that synvolcanic throw on the faults increases southward toward the caldera. The Sonora Pass–Little Walker caldera area is shown here to be very similar in structural style and scale to the transtensional stepover at the Quaternary Long Valley field. Furthermore, the broader structural setting of both volcanic fields is similar, because both are associated with a major approximately northeast-southwest sinistral oblique normal fault zone. This structural style is typical of central Walker Lane belt transtension. Previous models have called for westward encroachment of Basin and Range extension into the Sierra Nevada range front after arc volcanism ceased (ca. 6–3.5 Ma); we show instead that Walker Lane transtension is responsible for the formation of the range front, and that it began by ca. 12 Ma. We conclude that Sierra Nevada range-front faulting at Sonora Pass initiated during high-K arc volcanism, under a Walker Lane transtensional strain regime, and that this controlled the siting of the Little Walker caldera.

Birth of a plate boundary at ca. 12 Ma in the Ancestral Cascades arc, Walker Lane belt of California and Nevada

The Walker Lane belt of eastern California and western Nevada is the northernmost extension of the Gulf of California transtensional rift, where the process of continental rupture has not yet been completed, and rift initiation can be studied on land. GPS and earthquake focal mechanism studies demonstrate that the Walker Lane belt currently accommodates NW-SE–directed movement between the Sierra Nevada microplate and the North American plate, but the timing and nature of rift initiation remains unclear. I present a model for plate-margin-scale initiation of the Gulf of California and Walker Lane transtensional rifts at ca. 12 Ma; localization of rifting in both was initiated by thermal weakening in the axis of a subduction-related arc undergoing extension due to slab rollback, and thermal weakening in the arc was enhanced by stalling of the trenchward-migrating precursor arc against a thick Cretaceous batholithic lithospheric profile on its western margin. Rifting succeeded very quickly in the Gulf of California, due to stalling of Farallon slabs, but the Walker Lane transtensional rift has been unzipping northward along the axis of the Cascades arc, following the Mendocino triple junction. I infer that plate-margin-scale Walker Lane transtension was signaled by the development of an unusually large and voluminous transtensional arc volcanic center, the ca. 11.5–9 Ma Sierra Crest–Little Walker arc volcanic center. I show that the style of faulting in this large Miocene arc volcanic center closely matches that of Quaternary transtensional structures in the central Walker Lane, where it lies, and that it differs from southern and northern Walker Lane structures. This indicates that the temporal transition from E-W Basin and Range extension to NW-SE Walker Lane transtension occurred earlier than most workers have inferred. I also summarize new data which show that the central Sierra Nevada range front (from Long Valley to the Tahoe Basin) lies squarely within the Walker Lane belt, not to the west of it as previous workers have inferred.

Clustering of velocities in a GPS network spanning the Sierra Nevada Block, the Northern Walker Lane Belt, and the Central Nevada Seismic Belt, California‐Nevada

AbstractThe deformation across the Sierra Nevada Block, the Walker Lane Belt, and the Central Nevada Seismic Belt (CNSB) between 38.5°N and 40.5°N has been analyzed by clustering GPS velocities to identify coherent blocks. Cluster analysis determines the number of clusters required and assigns the GPS stations to the proper clusters. The clusters are shown on a fault map by symbols located at the positions of the GPS stations, each symbol representing the cluster to which the velocity of that GPS station belongs. Fault systems that separate the clusters are readily identified on such a map. Four significant clusters are identified. Those clusters are strips separated by (from west to east) the Mohawk Valley‐Genoa fault system, the Pyramid Lake‐Wassuk fault system, and the Central Nevada Seismic Belt. The strain rates within the westernmost three clusters approximate simple right‐lateral shear (~13 nstrain/a) across vertical planes roughly parallel to the cluster boundaries. Clustering does not recognize the longitudinal segmentation of the Walker Lane Belt into domains dominated by either northwesterly trending, right‐lateral faults or northeasterly trending, left‐lateral faults.

Clustering of GPS velocities in the Mojave Block, southeastern California

AbstractWe find subdivisions within the Mojave Block using cluster analysis to identify groupings in the velocities observed at GPS stations there. The clusters are represented on a fault map by symbols located at the positions of the GPS stations, each symbol representing the cluster to which the velocity of that GPS station belongs. Fault systems that separate the clusters are readily identified on such a map. The most significant representation as judged by the gap test involves 4 clusters within the Mojave Block. The fault systems bounding the clusters from east to west are 1) the faults defining the eastern boundary of the Northeast Mojave Domain extended southward to connect to the Hector Mine rupture, 2) the Calico‐Paradise fault system, 3) the Landers‐Blackwater fault system, and 4) the Helendale‐Lockhart fault system. This division of the Mojave Block is very similar to that proposed by Meade and Hager []. However, no cluster boundary coincides with the Garlock Fault, the northern boundary of the Mojave Block. Rather, the clusters appear to continue without interruption from the Mojave Block north into the southern Walker Lane Belt, similar to the continuity across the Garlock Fault of the shear zone along the Blackwater‐Little Lake fault system observed by Peltzer et al. []. Mapped traces of individual faults in the Mojave Block terminate within the block and do not continue across the Garlock Fault [Dokka and Travis, ].

Active tectonics of northwestern U.S. inferred from GPS‐derived surface velocities

Surface velocities derived from GPS observations from 1993 to 2011 at several hundred sites across the deforming northwestern United States are used to further elucidate the region's active tectonics. The new velocities reveal that the clockwise rotations, relative to North America, seen in Oregon and western Washington from earlier GPS observations, continue to the east to include the Snake River Plain of Idaho and south into the Basin and Range of northern Nevada. Regional‐scale rotation is attributed to gravitationally driven extension in the Basin and Range and Pacific‐North America shear transferred through the Walker Lane belt aided by potentially strong pinning below the Idaho Batholith. The large rotating section comprising eastern Oregon displays very low internal deformation rates despite seismological evidence for a thin crust, warm mantle, organized mantle flow, and elevated topography. The observed disparity between mantle and surface kinematics suggests that either little stress acts between them (low basal shear) or that the crust is strong relative to the mantle. The rotation of the Oregon block impinges on Washington across the Yakima fold‐thrust belt where shortening occurs in a closing‐fan style. Elastic fault locking at the Cascadia subduction zone is reevaluated using the GPS velocities and recently published uplift rates. The 18 year GPS and 80 year leveling data can both be matched with a common locking model suggesting that the locking has been stable over many decades. The rate of strain accumulation is consistent with hundreds of years between great subduction events.

Pliocene sinistral slip across the Adobe Hills, eastern California–western Nevada: Kinematics of fault slip transfer across the Mina deflection

The Adobe Hills region (California and Nevada, USA) is a faulted volcanic field located within the western Mina deflection, a right-stepping zone of faults that connects the northern Eastern California shear zone (ECSZ) to the south with the Walker Lane belt (WLB) to the north. New detailed geologic mapping, structural studies, and 40 Ar/ 39 Ar geochronology in the Adobe Hills allow us to calculate fault slip rates and test predictions for the kinematics of fault slip transfer into the Mina deflection. The Adobe Hills are dominated by Pliocene tuffaceous sandstone, basaltic lavas that yield 40 Ar/ 39 Ar ages between 3.13 ± 0.02 and 3.43 ± 0.01 Ma, and basaltic cinder cones. These Pliocene units unconformably overlie Middle Miocene latite ignimbrite that yields an 40 Ar/ 39 Ar age of 11.17 ± 0.04 Ma, and Quaternary tuffaceous sands, alluvium, and lacustrine deposits cap the sequence. Northwest-striking normal faults, west-northwest–striking dextral faults, and northeast-striking sinistral faults cut all units; the northeast-striking sinistral faults are the youngest and most well developed fault set. We calculate ∼0.1 mm/yr of approximately east-west horizontal extension and northwest dextral shear since the Pliocene. The prominent northeast-striking sinistral faults offset basalt ridgelines, normal fault–hanging-wall intersections, a channelized basalt flow, a basalt flow edge, and a basalt flow contact a net minimum of 921 ± 184 to 1318 ± 264 m across the Adobe Hills. These measured sinistral offsets yield a minimum Pliocene sinistral fault slip rate of 0.2–0.5 mm/yr; our preferred minimum slip rate is 0.4–0.5 mm/yr. The geometry and orientation of the prominent sinistral faults are consistent with simple shear/couple clockwise block rotation within a broad dextral shear zone. Vertical axis block rotation data are needed to test this interpretation. We propose that a set of faults subparallel to Sierra Nevada–North America motion and associated releasing steps, located west of the White Mountains fault zone and east of the Long Valley Caldera, transfer a portion of dextral Owens Valley fault slip northwestward onto the sinistral faults in the Adobe Hills. Dextral slip distributed across faults between the White Mountains fault zone and the Sierra Nevada and east of the Fish Lake Valley fault zone may account for the apparent discrepancy between summed long-term geologic slip rates and present-day geodetic rates across the northern ECSZ. Fault slip in the Adobe Hills is part of a regional pattern of initiation and renewal of dextral, sinistral, and normal fault slip during the Pliocene that extends from lat ∼40°N to ∼36°N within the ECSZ-WLB and along the western margin of the Basin and Range Province. This regional deformation episode may be related to changes in gravitational potential energy.

Distributed extensional deformation in a zone of right‐lateral shear: Implications for geodetic versus geologic rates of deformation in the eastern California shear zone‐Walker Lane

The eastern California shear zone (ECSZ)‐Walker Lane belt represents an important, evolving component of the Pacific‐North America plate boundary. Geodetic data suggest the northern ECSZ is accumulating dextral shear at a rate of ∼9.3 mm/a, more than double the total measured late Pleistocene rate at ∼37.5°N. At this latitude, the Silver Peak‐Lone Mountain (SPLM) extensional complex plays an important role in accommodating and transferring slip among the strike‐slip and normal faults of the ECSZ and Walker Lane. To better understand the recent geodynamic evolution of this region, we determined late Pleistocene extension rates for the Clayton Valley fault zone, one of a series of down‐to‐the‐northwest normal faults comprising the SPLM, using geologic mapping, differential GPS fault scarp surveys, and cosmogenic nuclide geochronology. Extension rates along the Clayton Valley fault zone are time‐invariant at 0.1 ± 0.1 to 0.3 ± 0.1 mm/a (depending on fault dip) since ∼137 ka. When combined with other published fault slip rates at this latitude, the cumulative late Pleistocene geologic slip rate is ∼3.3 to 5.2 mm/a. This rate is lower than both the geodetic rate of dextral shear and other long‐term slip rate budgets in the northern ECSZ. Our results suggest that deformation in Clayton Valley is spread across a diffuse set of normal faults and that not all of the deformation is recorded in the surficial geology. We suggest that the low cumulative geologic slip rate in the northern ECSZ may be a result of this distributed extension, which can cause long‐term rates of deformation to be significantly underestimated.