Visible And Near-infrared Bands Research Articles

Potential of land degradation index for soil salinity mapping in irrigated agricultural land in a semi-arid region using Landsat-OLI and Sentinel-MSI data.

Irrigated agricultural lands in arid and semi-arid regions are prone to soil degradation. Remote sensing technology has proven useful for mapping and monitoring the extent of this issue. To accurately discern soil salinity, it is essential to choose appropriate spectral wavelengths. This study evaluated the potential of the land degradation index (LDI) using the visible and near infrared (VNIR) and the short wavelength infrared (SWIR) spectral bands compared to that of soil salinity indices by integrating only the VNIR wavelengths. Landsat-OLI and Sentinel-MSI data, acquired 2weeks apart, were rigorously preprocessed and used. This research was conducted over irrigated agricultural land in Morocco, which is well known for its semi-arid climate and moderately saline soil. Furthermore, a field soil survey was conducted and 42 samples with variable electrical conductivity (EC) were collected for index calibration and validation of the results. The results showed that the visual analysis of the derived maps based on the examined indices exhibited a clear spatial pattern of gradual soil salinity changes extending from the elevated upstream plateau to the downstream of the plain, which limits agricultural activities in the southwestern sector of the study area. The results of this study show that LDI is effective in identifying soil salinity, as indicated by a coefficient of determination (R2) of 0.75 when using Sentinel-MSI and 0.72 with Landsat-OLI. The R2 value of 0.89 and root mean square error (RMSE) of 0.87 dS/m for soil salinity maps generated from LDI with Sentinel-MSI demonstrate high accuracy. In contrast, the R2 value of 0.83 and RMSE of 1.24 dS/m for maps produced from Landsat-OLI indicate lower accuracy. These findings indicate that high-resolution Sentinel-MSI data significantly improved the prediction of salinity-affected soils. Furthermore, this study highlights the benefits of using VNIR and SWIR bands for precise soil salinity mapping.

A fast and robust cirrus removal method for Landsat 8/9 images

High-quality cirrus removal plays a crucial role in remote sensing data analysis. Cirrus parallaxes are commonly observed within the vicinity of cirrus clouds in the visible and near-infrared (VNIR) bands of Landsat 8/9 images. Cirrus parallaxes have a nonnegligible effect on cirrus removal, but the existing methods do not account for the correction of parallaxes. Meanwhile, large-scale image processing involves intensive computation that requires extensive computing time. To address the effect of cirrus parallaxes and the low processing efficiency, we propose a fast and robust cirrus removal (FRCR) method. FRCR has achieved the first realization of the statistics law of cirrus parallax between the VNIR and cirrus bands, thus realizing the cirrus parallax correction. In addition, FRCR introduces an automatic sampling method to obtain the regression samples for practicality. Then, a Compute Unified Device Architecture (CUDA) based Newton method with constraints is introduced to parallelize the computation, to improve the computational performance. Experiment results of various scenarios demonstrate that the FRCR method can achieve high-quality cirrus removal by eliminating cirrus parallaxes, and significantly improving computational performance.

Visible and Near-Infrared Hyperspectral Diurnal Variation Calibration for Corn Phenotyping Using Remote Sensing

Remote sensing coupled with hyperspectral technology has become increasingly popular to investigate plant traits, showcasing its advantages in studying plant growth, health, and productivity. The quality of the collected hyperspectral images is crucial for subsequent data analysis and plant phenotyping studies. However, diurnal variations in spectral characteristics introduce more data variance in canopy reflectance spectra, raising the cost of subsequent analyses and compromising the performance of trait estimation models. In this study, a fixed gantry platform in a cornfield was used to capture visible and near-infrared (VNIR) hyperspectral images of corn canopies at consecutive time intervals. By applying reference board calibration and locally weighted scatterplot smoothing to minimize the effects of ambient light and daily growth, diurnal spectral changes across all involved VNIR wavelengths were investigated. Several distinct diurnal patterns were observed to have close connections with the plants’ physiological effects. Diurnal calibration models were established at every wavelength by employing the least squares polynomial algorithm, with the highest coefficient of determination reaching 0.84. Moreover, by employing diurnal calibration in canopy spectra processing, the reduction in spectral variance brought about by varying imaging time was evidently exhibited. This study not only reveals the diurnal spectral variation pattern at VNIR bands but also offers a reliable, straightforward, and low-cost approach to improve the quality of remote sensing data and reduce the inherent variance brought about via the different imaging times ensuring that comparable spectral analysis can be performed under relatively fair conditions.

Copper concentrate dual-band joint classification using reflectance hyperspectral images in the VIS-NIR and SWIR bands.

A study on the classification of copper concentrates relevant to the copper refining industry is performed by means of reflectance hyperspectral images in the visible and near infrared (VIS-NIR) bands (400-1000nm) and in the short-wave infrared (SWIR) (900-1700nm) band. A total of 82 copper concentrate samples were press compacted into 13-mm-diameter pellets, and their mineralogical composition was characterized via quantitative evaluation of minerals and scanning electron microscopy. The most representative minerals contained in these pellets are bornite, chalcopyrite, covelline, enargite, and pyrite. Three databases (VIS-NIR, SWIR, and VIS-NIR-SWIR) containing a collection of average reflectance spectra computed from 9×9p i x e l neighborhoods in each pellet hyperspectral image are compiled to train the classification models. The classification models tested in this work are a linear discriminant classifier and two non-linear classifiers, a quadratic discriminant classifier, and a fine K-nearest neighbor classifier (FKNNC). The results obtained show that the joint use of VIS-NIR and SWIR bands allows for the accurate classification of similar copper concentrates that contain only minor differences in their mineralogical composition. Specifically, among the three tested classification models, the FKNNC performs the best in terms of overall classification accuracy, achieving 93.4% accuracy in the test set when only VIS-NIR data are used to construct the classification model, up to 80.5% using only SWIR data, and up to 97.6% using both VIS-NIR and SWIR bands together.

Characterization of the East—West Spatial Uniformity for GOES-16/17 ABI Bands Using the Moon

The Advanced Baseline Imager (ABI) is the primary instrument onboard the NOAA Geostationary Operational Environmental Satellite-R Series (GOES-R) satellites, providing continuous weather imagery over the vast area in the Western Hemisphere. It is imperative to ensure consistent calibration accuracy within the instrument’s field of regard (FOR). This paper characterized the spatial uniformity in the east–west (EW) direction for the six ABI visible and near-infrared (VNIR) bands of the first two GOES-R satellites, GOES-16 (G16) and GOES-17 (G17), using a special collection of lunar chasing images during their post-launch testing and post-launch product testing (PLT/PLPT) periods. The EW response versus scan-angle (RVS) is examined with the normalized lunar irradiance ratios at varying scan angles combined from multiple lunar-chasing events. The impacts of straylight from the Earth were found in some of the B01–B03 lunar images. The straylight, including those scattered into the spacelook scenes near the polar regions and those leaked into space near the Moon, can cause RVS variation up to 1% for B01 and to a lesser magnitude for the other two bands. Straylight correction algorithms are applied for the accurate ABI lunar image irradiance calculation. After the corrections, the RVS variation is reduced to less than 0.3% for all the VNIR bands of both G16/17 in full-disk (FD) images. Results of this study also confirm that the Global Space-based Inter-Calibration System (GSICS) Implementation of the ROLO (GIRO) model has high relative accuracy for the ABI VNIR bands when the lunar images are collected within a relatively short time. The method described in this paper can be applied to validate the EW spatial uniformity for imagers on other geostationary satellites, including the recently launched GOES-18 and the future GOES-U satellites.

The capabilities of Sentinel-MSI (2A/2B) and Landsat-OLI (8/9) in seagrass and algae species differentiation using spectral reflectance

Abstract. This paper assesses the reflectance difference values between the respective spectral bands in the visible and near-infrared (VNIR) of Sentinel 2A/2B Multi-Spectral Instrument (MSI) and Landsat 8/9 Operational Land Imager (OLI) sensors for seagrass, algae, and mixed species discrimination and monitoring in a shallow marine environment southeast of Bahrain Island in the Arabian Gulf. To achieve these, a field survey was conducted to collect samples of seawater, underwater sediments, seagrass (Halodule uninervis and Halophila stipulacea), and algae (green and brown). In addition, an experimental mode was established in a goniometric laboratory to simulate the marine environment, and spectral measurements were performed using an Analytical Spectral Devices (ASD) spectroradiometer. Measured spectra and their transformation using the continuum-removed reflectance spectral (CRRS) approach were analyzed to assess spectral separability among separate or mixed species at varying coverage rates. Afterward, the spectra were resampled and convolved in the solar-reflective spectral bands of MSI and OLI sensors and converted into water vegetation indices (WVIs) to investigate the potential of red, green, and blue bands for seagrass and algae species discrimination. The results of spectral and CRRS analyses highlighted the importance of the blue, green, and near-infrared (NIR) wavelengths for seagrass and algae detection and likely discrimination based on hyperspectral measurements. However, when resampled and convolved in MSI and OLI bands, spectral information loses the specific and unique absorption features and becomes more generalized and less precise. Therefore, relying on the multispectral bandwidth of MSI and OLI sensors, it is difficult or even impossible to differentiate or to map seagrass and algae individually at the species level. Instead of the red band, the integration of the blue or the green band in WVI increases their power to discriminate submerged aquatic vegetation (SAV), particularly the water adjusted vegetation index (WAVI), water enhanced vegetation index (WEVI), and water transformed difference vegetation index (WTDVI). These results corroborate the spectral and the CRRS analyses. However, despite the power of blue wavelength to penetrate deeper into the water, it also leads to a relative overestimation of dense SAV coverage due to more scattering in this part of the spectrum. Furthermore, statistical fits (p<0.05) between the reflectance in the respective VNIR bands of MSI and OLI revealed excellent linear relationships (R2 of 0.999) with insignificant root mean square difference (RMSD) (≤ 0.0015). Important agreement (0.63 ≤ R2 ≤ 0.96) was also obtained between respective WVI regardless of the integrated spectral bands (i.e., red, green, and blue), yielding insignificant RMSD (≤ 0.01). Accordingly, these results pointed out that MSI and OLI sensors are spectrally similar, and their data can be used jointly to monitor accurately the spatial distribution of SAV and its dynamic in time and space in shallow marine environments, provided that rigorous data pre-processing issues are addressed.

Mapping smallholder forest plantations in Andhra Pradesh, India using multitemporal harmonized landsat sentinel‐2 S10 data

AbstractThis study's objective was to develop a method by which smallholder forest plantations can be mapped accurately in Andhra Pradesh, India, using multitemporal visible and near‐infrared (VNIR) bands from the sentinel‐2 multispectral instruments (MSIs). Conversion to cropland, coupled with secondary dependencies on and scarcity of wood products, has driven the deforestation and degradation of natural forests in Southeast Asia. Concomitantly, forest plantations have been established both within and outside of forests, with the latter (as contiguous blocks) and are the focus of this study. Accurately mapping smallholder forest plantations in South and Southeast Asia is difficult using remotely sensed data due to the plantations' small size (average of 2 hectares), short rotation ages (4–7 years for timber species), and spectral similarities to croplands and natural forests. Cloud‐free Harmonized landsat sentinel‐2 (HLS) S10 data were acquired over six dates, from different seasons, over four years (2015–2018). Available in situ data on forest plantations was supplemented with additional training data resulting in 2230 high‐quality samples aggregated into three land cover classes: nonforest, natural forest, and forest plantations. Image classification used random forests on a thirty‐band stack consisting of the VNIR bands and NDVI images for all six dates. The median classification accuracy from the 5‐fold cross‐validation was 94.3%. Our results, predicated on high‐quality training data, demonstrate that (mostly smallholder) forest plantations can be separated from natural forests even using only the sentinel‐2 VNIR bands when multitemporal data (across both years and seasons) are used.

Evaluation of Object-Based Greenhouse Mapping Using WorldView-3 VNIR and SWIR Data: A Case Study from Almería (Spain)

Plastic covered greenhouse (PCG) mapping via remote sensing has received a great deal of attention over the past decades. The WorldView-3 (WV3) satellite is a very high resolution (VHR) sensor with eight multispectral bands in the visible and near-infrared (VNIR) spectral range, and eight additional bands in the short-wave infrared (SWIR) region. A few studies have already established the importance of indices based on some of these SWIR bands to detect urban plastic materials and hydrocarbons which are also related to plastics. This paper aims to investigate the capability of WV3 (VNIR and SWIR) for direct PCG detection following an object-based image analysis (OBIA) approach. Three strategies were carried out: (i) using object features only derived from VNIR bands (VNIR); (ii) object features only derived from SWIR bands (SWIR), and (iii) object features derived from both VNIR and SWIR bands (All Features). The results showed that the majority of predictive power was attributed to SWIR indices, especially to the Normalized Difference Plastic Index (NDPI). Overall, accuracy values of 90.85%, 96.79% and 97.38% were attained for VNIR, SWIR and All Features strategies, respectively. The main PCG misclassification problem was related to the agricultural practice of greenhouse whitewash (greenhouse shading) that temporally masked the spectral signature of the plastic film.

Remote sensing of inland Sabkha and a study of the salinity and temporal stability for sustainable development: A case study from the West coast of Qatar

The inland sabkha of the Arabian Gulf is important to study for the occurrence of minerals, rocks, soil salinity, and stability of the sabkha due to the high demand for infrastructure and agriculture development region. This study describes the spectral absorptions of evaporite minerals, discriminates rocks, maps salt crusts, gypsiferous soil flats, and soil salinity, and studies the temporal stability of an inland sabkha of the Dukhan area, west coast of the State of Qatar. This was performed using satellite data of the Hyperion of EO1, ASTER of Terra, and multispectral instrument (MSI) of Sentinel-2. The occurrence of minerals in the area is detected using Hyperion data by the linear spectral unmixing (LSU) method and studied for their spatial distribution. The different geological formations of the sabkha were discriminated by using the VNIR (visible and near-infrared) and SWIR (shortwave infrared) spectral bands from ASTER by principal component analysis (PCA). The image developed by using the principal components (R:PC2, G:PC3, B:PC5) showed the formations in different tones. Salinity of the area was mapped using monthly data of MSI from 2018 to 2020 by normalized difference salinity index (NDSI) (band11-band12)/(band11 + band12). The results of the index displayed the distribution of salinity in the area. Besides, moisture of the area was studied by using the normalized difference moisture index (NDMI) (b8-b11)/(b8 + b11) and described the temporal stability of the sabkha. All the results of image analyses were validated through field and laboratory studies. The study of laboratory spectra of evaporite minerals namely gypsum, anhydrite, and halite present in the salt crusts and gypsiferous soil flats showed their unique spectral absorptions in between 1.4–1.5 μm and 1.9–2.0 μm whereas, the calcite and dolomite minerals of the carbonate formations exhibited deep absorptions near 2.345 and 2.495 μm respectively.

Validation of GOES-16 ABI VNIR channel radiometric performance with NPP and NOAA-20 VIIRS over the Sonoran Desert

The advanced baseline imager (ABI) onboard Geostationary Operational Environmental Satellites-16 (GOES-16) provides high-quality visible and near-infrared (VNIR) imagery data. Radiometric performance of the GOES-16 ABI multiple VNIR bands (B1, B2, B3, B5, and B6) is evaluated over the Sonoran Desert by comparing measurements with Suomi National Polar-Orbiting Partnership (S-NPP) and NOAA-20 visible infrared imaging radiometer suite equivalent bands M3, M5, M7, M10, and M11, respectively. In order to minimize the uncertainties due to the difference in spectral response functions of similar bands from the different sensors, spectral band adjustment factor (SBAF) derived from Hyperion data over Sonoran Desert is used. The large viewing angle at the Sonoran Desert by ABI (56.34 deg) and a lack of comprehensive BRDF model at such viewing geometry are the main challenges for the comparison. Two schemes to address such challenges were developed. A data-derived (DD) method, based on confining the matched solar-zenith angle and view-zenith angle between ABI and VIIRS, interpolation in solar-zenithal and relative-azimuthal angles is developed to address this issue. It is shown that there is some residual bias for ABI B1 and its equivalent VIIRS M3 band, which is mainly due to unaccounted angular dependence of atmospheric scattering in this DD method. To address this issue, a radiative transfer modeling (RTM)-based method to account for atmospheric effects is developed to facilitate the comparison. The time series trending and mean bias of reflectance ratio between ABI and VIIRS measurements over the Sonoran Desert after SBAF and bidirectional reflectance distribution function corrections are derived to evaluate the radiometric performance of ABI with respect to net primary productivity and NOAA-20 VIIRS. The analysis shows that the radiometric biases of the five VNIR channels of GOES-16 ABI are all within 5% in comparison to the matched channels of NPP VIIRS after applying the RTM correction. The analysis also detects ∼6 % drop in the radiometric bias of GOES-16 ABI 0.64 μm channel after April 23, 2019, which can be traced to the implementation of a correction of the ABI B2 calibration coefficient around this date. Further, we evaluate the relative radiometric bias for the five VNIR channels between NPP and NOAA-20 VIIIRS using double difference method, and the comparison shows that NPP VIIRS has 2% to 3% higher bias than NOAA-20 VIIRS for these spectral bands.

A scattering law based cirrus correction method for Landsat 8 OLI visible and near-infrared images

Cirrus clouds are commonly distributed in the atmosphere, and can lead to degradation of the ground information in optical remotely sensed images obtained using airborne and spaceborne sensors. A cirrus band on the Landsat 8 Operational Land Imager (OLI), i.e., Band 9, is designed to precisely detect cirrus cloud, providing a reference basis for the radiance calculation of cirrus cloud in other bands. Therefore, based on a scattering law, a cirrus cloud correction method is proposed in this paper to restore the ground information for Landsat 8 OLI visible and near-infrared (VNIR) images by comprehensively using the visible and cirrus bands. The scattering law and the high correlation between the two adjoining blue bands are combined to estimate each VNIR band's cirrus radiance. The relationship among the bands is constrained to comply with the scattering law. The differences between the ocean and land surfaces are also considered when determining the parameter in the scattering law. In the experiments conducted in this study, both simulated and acquired images contaminated with cirrus cloud were used to evaluate the proposed method, and both visual and quantitative evaluations were carried out to verify the performance. The results suggest that the cirrus cloud in the VNIR bands can be removed by the use of the proposed method. The ground information can also be adequately restored, with a mean absolute error of less than 0.7757 for the simulated data and a structural similarity index measure of greater than 0.8621 for the acquired data. When compared with three existing correction methods, the proposed method was able to obtain clearer and more accurate results over various land and ocean scenes. Furthermore, this method's applicability to other sensors with similar bands, such as the Sentinel-2 Multispectral Instrument, was also investigated and validated.

Sharpening of Worldview-3 Satellite Images by Generating Optimal High-Spatial-Resolution Images

Compared to using images in the visible and near-infrared (VNIR) wavelength range only, remotely sensed satellite imagery from the spectral wavelengths of both VNIR and shortwave infrared (SWIR), such as Sentinel-2A and Worldview-3, is more effective for analyzing various types of information for tasks such as land cover mapping, environmental monitoring and land use change detection. In this manuscript, a new sharpening technique to enhance the spatial resolution of Worldview-3 satellite imagery with various spatial and spectral resolutions is proposed. Selected and synthesized band schemes were used to produce optimal panchromatic images; then, sharpened images were generated by applying the Gram-Schmidt adaptive (GSA) and Gram-Schmidt 2 (GS2) techniques, which are component substitution (CS)- and multiresolution analysis (MRA)-based algorithms, respectively. In addition, to minimize the spectral distortion of the initial sharpened image, a postprocessing methodology for spectral distortion reduction was developed. Qualitative and quantitative evaluation of the sharpened images showed that the pansharpening performance using the GS2 technique based on the selected band scheme and spectral distortion reduction was the best. To confirm the usability of the SWIR band, supervised classification based on machine learning was performed on the pansharpened images obtained by applying the technique proposed in this study and on the pansharpened images obtained by the VNIR bands only. The classification accuracy of the results using SWIR bands was higher than that of VNIR bands only. In particular, it was confirmed that the accuracy of the classification of artificial facilities known to be effective for SWIR bands was greatly improved.

Radiometric Degradation Curves for the ASTER VNIR Processing Using Vicarious and Lunar Calibrations

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) onboard Terra platform, which was launched in 1999, has three separate subsystems: a visible and near-infrared (VNIR) radiometer, a shortwave-infrared radiometer, and a thermal-infrared radiometer. The ASTER VNIR bands have been radiometrically corrected for approximately 14 years by the sensor degradation curves estimated from the onboard calibrator according to the original calibration plan. However, this calibration by the onboard calibrator encountered a problem; specifically, it is inconsistent with the results of vicarious calibration and cross calibration. Therefore, the ASTER VNIR processing was applied by the radiometric degradation curves calculated from the results of three calibration approaches, i.e., the onboard calibrator, the vicarious calibration, and the cross calibration since February 2014. Even though the current degradation curves were revised, the inter-band and lunar calibrations show some inconsistencies owing to the different traceability in the bands by different calibration approaches. In this study, the current degradation curves and their problems are explained, and the new curves that are derived from the vicarious calibration with lunar calibration are discussed. The new degradation curves that have the same traceability in the bands will be used for future ASTER VNIR processing.

Lunar Calibration for ASTER VNIR and TIR with Observations of the Moon in 2003 and 2017

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), which is a multiband pushbroom sensor suite onboard Terra, has successfully provided valuable multiband images for approximately 20 years since Terra’s launch in 1999. Since the launch, sensitivity degradations in ASTER’s visible and near infrared (VNIR) and thermal infrared (TIR) bands have been monitored and corrected with various calibration methods. However, a unignorable discrepancy between different calibration methods has been confirmed for the VNIR bands that should be assessed with another reliable calibration method. In April 2003 and August 2017, ASTER observed the Moon (and deepspace) for conducting a radiometric calibration (called as lunar calibration), which can measure the temporal variation in the sensor sensitivity of the VNIR bands enough accurately (better than 1%). From the lunar calibration, 3–6% sensitivity degradations were confirmed in the VNIR bands from 2003 to 2017. Since the measured degradations from the other methods showed different trends from the lunar calibration, the lunar calibration suggests a further improvement is needed for the VNIR calibration. Sensitivity degradations in the TIR bands were also confirmed by monitoring the variation in the number of saturated pixels, which were qualitatively consistent with the onboard and vicarious calibrations.

An Efficient Approach to Remove Thick Cloud in VNIR Bands of Multi-Temporal Remote Sensing Images

Cloud-free remote sensing images are required for many applications, such as land cover classification, land surface temperature retrieval and agricultural-drought monitoring. Cloud cover in remote sensing images can be pervasive, dynamic and often unavoidable. Current techniques of cloud removal for the VNIR (visible and near-infrared) bands still encounters the problem of pixel values estimated for the cloudy area incomparable and inconsistent with the cloud-free region in the target image. In this paper, we proposed an efficient approach to remove thick clouds and their shadows in VNIR bands using multi-temporal images with good maintenance of DN (digital number) value consistency. We constructed the spectral similarity between the target image and reference one for DN value estimation of the cloudy pixels. The information reconstruction was done with 10 neighboring cloud-free pair-pixels with the highest similarity over a small window centering the cloudy pixel between target and reference images. Four Landsat5 TM images around Nanjing city of Jiangsu Province in Eastern China were used to validate the approach over four representative surface patterns (mountain, plain, water and city) for diverse sizes of cloud cover. Comparison with the conventional approaches indicates high accuracy of the approach in cloud removal for the VNIR bands. The approach was applied to the Landsat8 OLI (Operational Land Imager) image on 29 April 2016 in Nanjing area using two reference images. Very good consistency was achieved in the resulted images, which confirms that the proposed approach could be served as an alternative for cloud removal in the VNIR bands using multi-temporal images.

SHARPENDING OF THE VNIR AND SWIR BANDS OF THE WIDE BAND SPECTRAL IMAGER ONBOARD TIANGONG-II IMAGERY USING THE SELECTED BANDS

Abstract. The Tiangong-II space lab was launched at the Jiuquan Satellite Launch Center of China on September 15, 2016. The Wide Band Spectral Imager (WBSI) onboard the Tiangong-II has 14 visible and near-infrared (VNIR) spectral bands covering the range from 403–990 nm and two shortwave infrared (SWIR) bands covering the range from 1230–1250 nm and 1628–1652 nm respectively. In this paper the selected bands are proposed which aims at considering the closest spectral similarities between the VNIR with 100 m spatial resolution and SWIR bands with 200 m spatial resolution. The evaluation of Gram-Schmidt transform (GS) sharpening techniques embedded in ENVI software is presented based on four types of the different low resolution pan band. The experimental results indicated that the VNIR band with higher CC value with the raw SWIR Band was selected, more texture information was injected the corresponding sharpened SWIR band image, and at that time another sharpened SWIR band image preserve the similar spectral and texture characteristics to the raw SWIR band image.

Sharpening the VNIR and SWIR Bands of Sentinel-2A Imagery through Modified Selected and Synthesized Band Schemes

In this work, the bands of a Sentinel-2A image with spatial resolutions of 20 m and 60 m are sharpened to a spatial resolution of 10 m to obtain visible and near-infrared (VNIR) and shortwave infrared (SWIR) spectral bands with a spatial resolution of 10 m. In particular, we propose a two-step sharpening algorithm for Sentinel-2A imagery based on modified, selected, and synthesized band schemes using layer-stacked bands to sharpen Sentinel-2A images. The modified selected and synthesized band schemes proposed in this study extend the existing band schemes for sharpening Sentinel-2A images with spatial resolutions of 20 m and 60 m to improve the pan-sharpening accuracy by changing the combinations of bands used for multiple linear regression analysis through band-layer stacking. The proposed algorithms are applied to the pan-sharpening algorithm based on component substitution (CS) and a multiresolution analysis (MRA), and our results are then compared to the sharpening results when using sharpening algorithms based on existing band schemes. The experimental results show that the sharpening results from the proposed algorithm are improved in terms of the spatial and spectral properties when compared to existing methods. However, the results of the sharpening algorithm when applied to our modified band schemes show differing tendencies. With the modified, selected band scheme, the sharpening result when applying the CS-based algorithm is higher than the result when applying the MRA-based algorithm. However, the quality of the sharpening results when using the MRA-based algorithm with the modified synthesized band scheme is higher than that when using the CS-based algorithm.

Integrating Data of ASTER and Landsat-8 OLI (AO) for Hydrothermal Alteration Mineral Mapping in Duolong Porphyry Cu-Au Deposit, Tibetan Plateau, China

One of the most important characteristics of porphyry copper deposits (PCDs) is the type and distribution pattern of alteration zones which can be used for screening and recognizing these deposits. Hydrothermal alteration minerals with diagnostic spectral absorption properties in the visible and near-infrared (VNIR) through the shortwave infrared (SWIR) regions can be identified by multispectral and hyperspectral remote sensing data. Six Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) bands in SWIR have been shown to be effective in the mapping of Al-OH, Fe-OH, Mg-OH group minerals. The five VNIR bands of Landsat-8 (L8) Operational Land Imager (OLI) are useful for discriminating ferric iron alteration minerals. In the absence of complete hyperspectral coverage area, an opportunity, however, exists to integrate ASTER and L8-OLI (AO) to compensate each other’s shortcomings in covering area for mineral mapping. This study examines the potential of AO data in mineral mapping in an arid area of the Duolong porphyry Cu-Au deposit(Tibetan Plateau in China) by using spectral analysis techniques. Results show the following conclusions: (1) Combination of ASTER and L8-OLI data (AO) has more mineral information content than either alone; (2) The Duolong PCD alteration zones of phyllic, argillic and propylitic zones are mapped using ASTER SWIR bands and the iron-bearing mineral information is best mapped using AO VNIR bands; (3) The multispectral integration data of AO can provide a compensatory data of ASTER VNIR bands for iron-bearing mineral mapping in the arid and semi-arid areas.

PAN SHARPENING QUALITY INVESTIGATION OF TURKISH IN-OPERATION REMOTE SENSING SATELLITES: APPLICATIONS WITH RASAT AND GÖKTÜRK-2 IMAGES

Abstract. Recently two optical remote sensing satellites, RASAT and GÖKTÜRK-2, launched successfully by the Republic of Turkey. RASAT has 7.5 m panchromatic, and 15 m visible bands whereas GÖKTÜRK-2 has 2.5 m panchromatic and 5 m VNIR (Visible and Near Infrared) bands. These bands with various resolutions can be fused by pan-sharpening methods which is an important application area of optical remote sensing imagery. So that, the high geometric resolution of panchromatic band and the high spectral resolution of VNIR bands can be merged. In the literature there are many pan-sharpening methods. However, there is not a standard framework for quality investigation of pan-sharpened imagery. The aim of this study is to investigate pan-sharpening performance of RASAT and GÖKTÜRK-2 images. For this purpose, pan-sharpened images are generated using most popular pan-sharpening methods IHS, Brovey and PCA at first. This procedure is followed by quantitative evaluation of pan-sharpened images using Correlation Coefficient (CC), Root Mean Square Error (RMSE), Relative Average Spectral Error (RASE), Spectral Angle Mapper (SAM) and Erreur Relative Globale Adimensionnelle de Synthése (ERGAS) metrics. For generation of pan-sharpened images and computation of metrics SharpQ tool is used which is developed with MATLAB computing language. According to metrics, PCA derived pan-sharpened image is the most similar one to multispectral image for RASAT, and Brovey derived pan-sharpened image is the most similar one to multispectral image for GÖKTÜRK-2. Finally, pan-sharpened images are evaluated qualitatively in terms of object availability and completeness for various land covers (such as urban, forest and flat areas) by a group of operators who are experienced in remote sensing imagery.

Remote Sensing of 3-D Geometry and Surface Moisture of a Peat Production Area Using Hyperspectral Frame Cameras in Visible to Short-Wave Infrared Spectral Ranges Onboard a Small Unmanned Airborne Vehicle (UAV)

Miniaturized hyperspectral imaging sensors are becoming available to small unmanned airborne vehicle (UAV) platforms. Imaging concepts based on frame format offer an attractive alternative to conventional hyperspectral pushbroom scanners because they enable enhanced processing and interpretation potential by allowing for acquisition of the 3-D geometry of the object and multiple object views together with the hyperspectral reflectance signatures. The objective of this investigation was to study the performance of novel visible and near-infrared (VNIR) and short-wave infrared (SWIR) hyperspectral frame cameras based on a tunable Fabry–Perot interferometer (FPI) in measuring a 3-D digital surface model and the surface moisture of a peat production area. UAV image blocks were captured with ground sample distances (GSDs) of 15, 9.5, and 2.5 cm with the SWIR, VNIR, and consumer RGB cameras, respectively. Georeferencing showed consistent behavior, with accuracy levels better than GSD for the FPI cameras. The best accuracy in moisture estimation was obtained when using the reflectance difference of the SWIR band at 1246 nm and of the VNIR band at 859 nm, which gave a root mean square error (rmse) of 5.21 pp (pp is the mass fraction in percentage points) and a normalized rmse of 7.61%. The results are encouraging, indicating that UAV-based remote sensing could significantly improve the efficiency and environmental safety aspects of peat production.