Intensity Of UV Radiation Research Articles

Effects of Protected Cultivation on Agronomic, Yield, and Quality Traits of Yard-Long Bean (Vigna unguiculata ssp. unguiculata cv.-gr. sesquipedalis)

Protected cultivation is the sustainable approach to horticultural crop production under adverse climates. In this study, the performance of yard-long beans under three protected cultivations, including single-span polyhouse (SSP), five-span polyhouse (FSP), and insect-proof net house (IPN), is examined and compared to open field cultivation. The above protected cultivation can extend the harvest period of pods by 6–10 days, improve their quality, and increase yield by 15.6% to 25.1%, reducing the incidence and severity of thrips and Cercospora leaf spot, rust, and powdery mildew. Among them, yard-long beans grown in SSP are longer and straighter in shape and have the lowest incidence and severity of pests and diseases and the highest levels of total polyphenols, total sugar, soluble protein, starch, and fiber. This indicates that protected cultivation has broad application in the production of yard-long beans. Through full subset regression analysis (FSRA), we report here that the yield and of yard-long bean occurrences of pests and diseases were highly impacted by climatic factors, especially UV radiation intensity and air temperature. These results have considerable implications for improving pod yield and quality and green prevention and control of pests and diseases through optimizing facility structure and fertilizer management.

Advanced multicolor dynamic fluorescence anti-counterfeiting and encryption strategy based on light-induced reversible perovskite lattice distortion

Time-dynamic fluorescence encryption and anti-counterfeiting technology have garnered significant attention in the high-end information security field. However, developing tunable multicolor solid-state photoluminescent systems that are low-cost, easy to manufacture, scalable, and convenient to verify remains a considerable challenge. In this study, we finely tuned the luminescence behavior of CsCdCl3 all-inorganic perovskite crystals using a halogen doping strategy, resulting in reversible lattice distortion under UV light and endowing them with photoactivated luminescence properties to produce dynamic fluorescence. Upon the introduction of Br-, the optical properties of CsCdCl3 changed significantly, with the fluorescence emission color shifting from orange to white-green under UV irradiation. By adjusting the Br- doping ratio and UV irradiation intensity, the fluorescence color change time of CsCdCl3 can be controlled. Multiple cycle light exposure tests demonstrated that the luminescence properties of CsCdCl3 remained identical to the initial state, indicating high stability in response to UV stimulation. Consequently, we successfully realized advanced anti-counterfeiting and 4D code encryption modes based on dynamic fluorescence. The introduction of a time variable imparts extremely high security to these strategies. This work provides an exciting approach for designing information encryption materials with higher security requirements and offers a promising high-sensitivity UV detection material.

Utilization of photocatalytic degradation and efficiency of engineered geopolymer composite tile doped with nano-particles under ultraviolet light

This study investigates the impact of nano-zinc oxide (ZnO) on the self-cleaning and microstructural performance of engineered geopolymer composites (EGC) for urban cleanliness enhancement. The research focuses on achieving homogeneous dispersion of nano-ZnO through ultrasonication to prevent agglomeration and assess its effects on workability, setting time, mechanical, and microstructural properties of EGC. Results show that incorporating ZnO nanoparticles at 5 % and 10 % concentrations as a surface coating on engineered geopolymer composite creates a highly effective photocatalytic material. This enhanced composite demonstrates significant capability in degrading Rhodamine B (RhB) under UV light exposure over a 15-day period, breaking down organic pollutants into simpler, potentially less toxic substances. The efficiency of degradation depends on factors such as nano-ZnO concentration, UV radiation intensity, and initial pollutant concentration. The optimal dosage of nano-ZnO in EGC is found to be 0.5 %, which enhances hydration and pozzolanic activity, promoting a densified microstructure at the nanoscale. This innovative composite material shows promise as a self-cleaning finishing material for urban buildings, offering potential improvements in both aesthetics and environmental sustainability.

Effect of irradiation intensity on the rate of photocatalysis of TiO2 coatings obtained by detonation spraying

AbstractThe influence of UV irradiation intensity on the rate constant of photocatalytic reaction of TiO2 coatings applied by detonation spraying on the hot‐rolled carbon steel and glass‐cloth‐base laminate (plastic) is studied. The effect of substrate material on the studied phenomenon is pronounced. The kinetic curves at different UV irradiation intensities and the rate constants of the photocatalytic reaction are obtained for different values of energy flux density varied from 3.0 to 8.0 mW/m2. The photocatalytic rate constant of coatings placed on plastic increases with an increase in the energy flux density from.038 to.055 1/h. Samples applied at a spray distance of 50 mm are characterized by a higher the photocatalytic rate constant than those applied at a distance of 40 mm. The value of photocatalytic rate constant does not change starting from a certain flow value for such samples and reaches the saturation value of about.054 1/h. Saturation is achieved quite quickly already at a density flux of about 5.5 mW/m2. Two new phenomenological models based on differential equation, the analytical solutions to which sufficiently describe experimental dependence of the photocatalytic rate constant on the energy flux density, are proposed.

Cycles of solar ultraviolet radiation favor periodic expansions of cyanobacterial blooms in global lakes

Global warming and eutrophication are known to increase the prevalence of cyanobacterial blooms, posing a severe threat to the ecological stability and sustainability of water bodies. The long-term (over an annual time frame) effect of UV radiation on cyanobacterial blooms in lakes are rarely discussed though the substantial effects of high-intensity UV radiation on the growth inhibition of marine phytoplankton were studied. Here, we employed the datasets on surface solar UV radiation, nitrogen and phosphorus concentrations, and the annual scales and frequencies of cyanobacterial blooms in lakes across long-term spatial scales to probe the relationship of UV radiation with cyanobacterial blooms. The results indicated that enhanced solar UV radiation may unintentionally stimulate cyanobacterial growth and favor the expansions of cyanobacterial blooms in lakes around the world. The fluctuating UV radiation significantly affects the annual scales of cyanobacterial blooms in both eutrophic and oligotrophic lakes. Solar UV radiation enhances the positive impact of rising phosphorus levels on cyanobacterial blooms because UV radiation prompts the synthesis of polyphosphate in cyanobacteria cells, which helps cyanobacteria to alleviate the stress of UV light. The scales of cyanobacterial blooms are significantly impacted by solar UV radiation intensities as opposed to the annual frequency of cyanobacterial blooms. Furthermore, solar UV radiation fluctuation with a 9-year period over a 14-year main cycles significantly affects the periodicities of cyanobacterial blooms in global lakes, which provides a basis for predicting the peak value of the scales of cyanobacterial blooms in lakes. These findings opened up new avenues of inquiry into the mechanism and management strategies of cyanobacterial blooms in lakes worldwide.

Investigation of changes in high temperature performance of asphalt concrete under ultraviolet radiation

In recent years, asphalt concrete pavement in being a large number of applications, and gradually appeared a number of pavement damage problems, especially in the strong ultraviolet and high temperature environment of asphalt concrete pavement, because of long-term exposure to ultraviolet radiation, resulting in high-temperature durability of the pavement deteriorated year by year. In this paper, the number of UV aging cycles, aging temperature and UV radiation intensity on the rutting depth and dynamic stability are investigated through high temperature rutting test. The test results show that: for asphalt concrete, the number of UV aging cycles has a more pronounced effect on dynamic stability and rut depth compared to aging temperature and UV radiation intensity.

LED ДЖЕРЕЛА УЛЬТРАФІОЛЕТОВОГО ВИПРОМІНЮВАННЯ: МЕТОДИЧНЕ ТА ПРИЛАДОВЕ ЗАБЕЗПЕЧЕННЯ З УРАХУВАННЯМ ГАРМОНІЗАЦІЇ ЗАКОНОДАВСТВА ЄС ТА УКРАЇНИ

One of the effective means of disinfecting premises is its irradiation with ultraviolet bactericidal radiation (UVBV), which is in the UV-C region (200 nm - 280 nm) and for mercury lamps has a radiation peak at a wavelength of 254 nm. However, UVBV should be used competently and with appropriate caution in terms of its intensity and safety, avoiding risks of damage to human skin and eyes. Therefore, UVBV is used indoors, mainly in the absence of a person. But when using sources of this type of optical radiation in the presence of a person, proper attention should be paid to controlling the intensity of UVBV and the time of its exposure. At the same time, it should be noted that the active processes of harmonization of the legislation of the EU and Ukraine require the modernization of the regulatory and methodological base for the measurement and hygienic assessment of ultraviolet radiation in the production environment and in the environment, significantly expanding the possibilities of using UVB sources, including in the presence of humans. Therefore, the purpose of the study is to create the basis for appropriate methodological recommendations for the use of bactericidal ultraviolet monochrome LED sources for disinfection of air and surfaces in rooms, as well as the formulation of appropriate requirements for UV radiometers, which should ensure control of the technical parameters of the mentioned ultraviolet monochrome LED sources. As a result of the research, scientific principles were proposed for the instrumental and methodical control of the safe use of bactericidal ultraviolet monochrome LED sources for the improvement of air and surfaces in premises of various purposes, taking into account the requirements of the legislation of Ukraine and the EU. The technical characteristics of the available UVBV LED sources were analyzed, based on which the medical and technical requirements for UV radiometers were formulated, which should ensure control of the intensity and actinic dose of UV radiation in accordance with the requirements of DSTU EN 62471:2017 "Safety of photobiological lamps and lamp systems (EN 62471:2008 , IDT; IES 62471:2006, MOD)". Design approaches to the formation of the spectral range of RG sensitivity by using appropriate light filters, including for the blue light range (380-480 nm), have been determined. A technique for correcting the spectral characteristic of the RG sensitivity is proposed, which contributes to the reduction of the intensity measurement error created by different LED sources.

Effect of Residue Acrylic Monomers in Synthesized Solvent-Free Photoreactive Pressure-Sensitive Adhesives on the Main Properties of Transfer Tapes Applied to Joining Wooden Elements.

This publication describes the influence of residue monomers in synthesized pressure-sensitive adhesives based on acrylics on their main properties-tack, peel adhesion, shear strength and shrinkage-in the form of transfer tapes used for joining wooden elements in the furniture industry. The discussed carrier-free adhesive tapes are synthesized via photo-crosslinking and photopolymerization with UV radiation of the photoreactive prepolymers sandwiched between two adhesive siliconized polyester films. The simultaneous crosslinking and polymerization processes carried out under UV lamps placed simultaneously above and below the crosslinked photoreactive polymer layer lead to the production of a carrier-free adhesive film. The preliminary target of these studies was to investigate how the intensity of UV radiation and the time of its exposure affect the viscosity of the photoreactive compositions and the content of unreacted monomers in them. Next, the influence of the crosslinking agent concentration and UV irradiation time on the content of unreacted monomers after the crosslinking process was tested. The last step of the studies was the investigation of the influence of the residue monomer concentration on the application properties of the obtained pressure-sensitive adhesive layers. The typical PSA application properties were tested on the wood samples: tack, peel adhesion, shear strength (cohesion) and shrinkage.

Water chemical treatment by photocatalytic activity of reduced graphene oxide-decorated zinc sulfide nanocomposite

The photocatalytic properties of reduced graphene oxide decorated ZnS nanocomposite was employed for photodegradation of phenol red as a chemical agent in water. ZnS nanocomposite was synthesized by hydrothermal method. Reduced graphene oxide decorated ZnS nanocomposite was produced by pulsed laser ablation of graphite bulk in the solution of ZnS nanocomposite. Variety of spectroscopic and imaging diagnostics including X-ray diffraction (XRD), UV–vis absorption spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were used to characterize the synthesized nanostructures. Water treatment was carried out in a closed handmade reactor. The concentration of the phenol red pollutant as the chemical agent, was extracted from the absorption spectra of treated water. Dependence of the behaviors of phenol red dye on the pH of the medium was studied in detail. Effects of UV radiation intensity, treatment time, pH of the polluted water, and aging on the efficiency of the treatment were investigated. Results show that even in the dark condition rGO-ZnS nanocomposite is an effective material to remove phenol red pollutant from water. The highest efficiency of treatment after 120 min was achieved in neutral pH water. Furthermore, after 7 days, with nanostructures and without UV radiation, the removal process in the polluted water was continued.

Study of norfloxacin degradation by advanced oxidation process using UV/TiO2/H2O2 in an annular reactor

Norfloxacin (NFX) residual was frequently found in domestic wastewater, sewage treatment plants, hospital wastewater, and surface water like lakes and rivers. This threatens the ecological balance of the environment. Moreover, normal biological treatment methods (including membrane bioreactor - MBR) are not feasible for the removal of NFX. In this study, the degradation of NFX through advanced oxidation processes (AOPs) utilising UV/TiO2 and H2O2 as reagents in a laboratory-scale tubular reactor system was conducted. The degradation reactions of NFX could be represented by the Langmuir-Hinshelwood kinetic model. The influence of factors, including TiO2and H2O2 concentrations, UV irradiation intensity, and hydrodynamic conditions (specifically, Reynolds number), on the apparent reaction rate constant (kapp) was evaluated. The results demonstrated that the advanced oxidation process employing the combined reagents of UV/TiO2/H2O2 under the following reaction conditions: TiO2 and H2O2concentrations of 0.2 g/l and 0.0492 mol/l, UV irradiation intensity of 225 W/m2, and Reynolds number of 6700, achieved an apparent degradation reaction rate constant for NFX of 0.052 min-1.

Synthesis of magnesium oxide nanoparticles and its application for photocatalytic removal of furfural from aqueous media: Optimization using response surface methodology

Furfural is a toxic compound with an LD50 of 65 mg/kg that is produced in many industries, such as paper industries, petrochemical industries, and oil refineries. This compound exists in various concentrations in these industries and is released into the environment. Therefore, removing this contaminant from the wastewater of production units is among the environmental priorities of every company. This study investigated the optimization of photocatalytic removal of furfural using synthesized magnesium oxide nanoparticles (MgONPs) by the response surface method (RSM). In this study, MgONPs were prepared by the direct precipitation method, and the characteristics of the nanoparticles (NPs) were examined using XRD and SEM analyses. The effect of various operating parameters, including pH (3, 7, and 11), contact time (15, 90, and 165 min), initial concentration of furfural (25, 150, and 275 mg/L), dose of NPs (125, 687.5, and 1250 mg/L), and UV radiation intensity (8, 15, and 30 µW/cm2) on furfural removal was explored. Furfural concentration was measured using a spectrophotometer at a wavelength of 277 nm. The number of samples was determined by the CCD method. Data were analyzed using MINITAB 16 software. The optimal removal conditions based on variance analysis and appropriate model were obtained at a pH of 6, NP dose of 1 g/L, initial concentration of 250 mg/L, reaction time of 160 min, and UV radiation intensity of 30 µW/m2. Under these conditions, the removal efficiencies for both furfural and COD were 99.97%. The results of the analysis of the synthesized MgONPs also showed that the direct precipitation method is a fast and low-cost method for the synthesis of MgONPs. Results showed that the photocatalytic process in the presence of synthesized MgONPs is highly efficient in removing furfural from aqueous media.

Are Blue-Cut Lenses Safe for Children? Potential Effects on Eye Length and Refractive Disorders

Blue-blocking lenses, including both spectacles and intraocular lenses, are designed to selectively reduce the intensity of short-wavelength visible light and UV radiation using a chromophore. Unlike standard spectacle lenses, which only offer varying degrees of UV protection, blue-blocking lenses provide additional benefits such as enhancing visual performance, reducing eye fatigue from digital screens, protecting the retina from phototoxicity, and minimizing disruption of the circadian rhythm caused by blue light-emitting devices used in the evening. Research has shown that the length of the eye tends to increase over time, especially during the first 10 months of life, indicating the importance of this period in eye development. The Purkinje shift is a phenomenon where the eye becomes more sensitive to blue light in the dark, and it is a normal physiological process. However, there is concern that prolonged use of blue-cut lenses in children may affect the development of eye length and contribute to an increase in refractive eye disorders.

Effect of Ultraviolet Aging on Rheological Properties and Microstructure of Rubber Asphalt in High Altitude Area

High altitude and strong ultraviolet radiation in Qinghai Tibet Plateau induces the brittleness and hardening of asphalt, which leads to temperature cracks, pits and other diseases of asphalt pavement. In this paper, the accelerated UV aging test of rubber asphalt was carried out by simulating the UV radiation intensity in Xining, Qinghai Province, and the rheological properties and microstructure changes of rubber asphalt were analyzed. The results show that the complex modulus of rubber asphalt increases exponentially with the extension of UV aging time. The phase angle of rubber asphalt decreases linearly with UV aging, and the deformation recovery performance of rubber asphalt increases; UV radiation has the most significant effect on the micro morphology of rubber asphalt. With the further extension of UV aging time, micro cracks are formed in rubber asphalt, and the low-temperature crack resistance and fatigue failure resistance of rubber asphalt are gradually reduced.

Developing a UV dosing strategy for UV/chlorine process towards the trade-off between pharmaceuticals and personal care products degradation and disinfection by-products formation

In addition to UV wavelength and pH, UV irradiation intensity and fluence also play crucial roles in the UV/chlorine treatment of drinking water. This work aimed to develop a novel UV irradiation strategy to achieve a trade-off between pharmaceuticals and personal care products (PPCPs) degradation and disinfection by-products (DBPs) formation during UV/chlorine water treatment under a specific chlorine dose. Under high UV irradiation intensity at the same UV fluence, the faster chlorine photolysis produced higher steady-state concentrations of •Cl and •OH species but abated cumulative exposures of free available chlorine (CTFAC = ∫0t[Cl2]dt). As a result, the degradation rate of PPCPs was accelerated, but the removal percentage of some PPCPs decreased. Meanwhile, the degradation of the chromophores of dissolved organic matters (DOM) declined by 23.3%–24.8% under the higher UV irradiation intensity. Reducing CTFAC values (50.7%–57.6%) by high UV irradiation intensity could mitigate the formation of haloacetic acids, trihalomethanes and absorbable organic halogens (13.9%–14.9%), which addressed the key role of active chlorine in the formation of DBPs in the UV/chlorine process. DBPs were mainly generated from the interactions of DOM with reactive chlorine. The Vibrio fischeri data further indicated that increasing UV intensity reduced acute toxicity regardless of UV wavelength or water pH. For the same UV fluence dose, the high UV irradiation intensity can effectively control the trade-off between oxidation efficiency and DBPs formation during UV/chlorine treatment.

Light-Switchable Membrane Permeability in Giant Unilamellar Vesicles.

In this work, giant unilamellar vesicles (GUVs) were synthesized by blending the natural phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) with a photoswitchable amphiphile (1) that undergoes photoisomerization upon irradiation with UV-A (E to Z) and blue (Z to E) light. The mixed vesicles showed marked changes in behavior in response to UV light, including changes in morphology and the opening of pores. The fine control of membrane permeability with consequent cargo release could be attained by modulating either the UV irradiation intensity or the membrane composition. As a proof of concept, the photocontrolled release of sucrose from mixed GUVs is demonstrated using microscopy (phase contrast) and confocal studies. The permeability of the GUVs to sucrose could be increased to ~4 × 10-2 μm/s when the system was illuminated by UV light. With respect to previously reported systems (entirely composed of synthetic amphiphiles), our findings demonstrate the potential of photosensitive GUVs that are mainly composed of natural lipids to be used in medical and biomedical applications, such as targeted drug delivery and localized topical treatments.

Polyacrylamide/sodium alginate photochromic hydrogels with enhanced toughness and fast response for optical display and rewritable information record

Photochromic hydrogels have broad prospects in wearable optoelectronic technology, rewritable information storage technology, biological imaging agents and chemical sensors, etc. However, it is still a challenge to develop photochromic hydrogels with high transparency, mechanical properties, fast response, stability and color reversibility. In this study, a novel photochromic hydrogel (PAAm/SA-Mo7) was prepared by loading ammonium molybdate (Mo7) into a double-network hydrogel of polyacrylamide (PAAm) and sodium alginate (SA) through a facile one-step method. The introduction of SA and Mo7 significantly improved the mechanical properties of hydrogels, and the maximum elongation and breaking energy are 27.5 and 86 times higher than those of pure PAAm. Furthermore, the photochromic hydrogels have fast response and stable reversible color change. The coloring process of hydrogels can be precisely controlled by the time and intensity of UV irradiation, and the fading process can also be controlled by temperature. The photochromic hydrogel can be applied to self-erasing rewritable media and information storage. This work provides a new approach for the development of flexible wearable optoelectronic materials.

Sunlight Parameters Influence the Survival and Decline of Salmonella and Escherichia coli in Water

The effect of variations in temperature, UV radiation, and sunlight intensity on Escherichia coli, E. coli O157:H7, Salmonella Newport, and antibiotic resistant (ABR) variants of E. coli O157:H7 and Salmonella Newport exposed to sunlight was evaluated. Bacterial strains suspended in sterile deionized water at a concentration of 8 log CFU/mL were exposed to sunlight on three different days for 180 min; control treatments were stored in the dark. The mean temperature of 30.08 and 26.57°C on day 1 and day 3, respectively, was significantly different (P < 0.05). The UV intensity was significantly different on all 3 days, and sunlight intensity significantly differed on day 3 (P < 0.05). Bacterial population decline positively correlated with temperature, sunlight, and UV intensity. Differences in bacterial population declines differed among species, ABR profile, and day of exposure (P < 0.05). On day 1 and day 2, the populations of E. coli dropped below the limit of detection (1 log CFU/mL), whereas the percentage of live cells was 67 and 6.6%, respectively. The artificial neural network model developed to predict bacterial survival under different environmental conditions suggested that Salmonella cells were more resistant than E. coli cells. The ABR strains had significantly higher numbers of viable cells after sunlight exposure (P < 0.05). Sunlight-exposed cells resuscitated in tryptic soy broth varied in maximum population density and maximum specific growth rate based on bacterial species and presence of ABR. Morphological changes such as viable but nonculturable state transition and filament formation were detected in subpopulations of sunlight-exposed bacteria. Daily fluctuations in UV and sunlight intensity can result in significant variations in bacterial decline and recovery.

Comparative study of UV/H2O2 and UV/PMS processes for treating pulp and paper wastewater.

Pulp and paper wastewater (PPWW) contains numerous refractory and harmful contaminants that require advanced treatment to meet the discharge criteria. This study compared the efficacy of two PPWW treatments: ultraviolet/peroxymonosulfate (UV/PMS) and ultraviolet/H2O2 (UV/H2O2) working under similar circumstances. The initial pH value, oxidant dosage, UV radiation intensity, and pseudo-first-order constant kobs were systematically studied in both systems. Optimally, the UV/PMS process produced an effluent of higher quality than the UV/H2O2, as measured by the removal efficiencies of chemical oxygen demand (COD) in 60 min, which were 48.2 and 64.3% for the respective UV/H2O2 and UV/PMS processes and corresponding kobs values of 0.0102 and 0.0159 min-1, respectively. Radical scavenging experiments demonstrated that •OH was the primary reactive oxygen species in UV/H2O2 process, and •OH and SO4-• in the UV/PMS process. Moreover, ultraviolet-visible spectroscopy and gas chromatography coupled mass spectroscopy analyses showed that deep treatment of petroleum hydrocarbons with carbon chain lengths greater than 18 and macromolecular semi-volatile organic compounds in paper wastewater is difficult, whereas the UV/PMS process can significantly improve the removal of amides, esters, phenols, and other aromatic compounds.

The Paradoxical Role of far-Ultraviolet C (far-UVC) in Inactivation of SARS-CoV-2: The Issue of Droplet Size.

The Omicron variant is spreading at a rate we have never observed with any previous variant. A lot of efforts have been taken to inactivate SARS-CoV-2, especially the omicron variant. Specific wavelength ranges of electromagnetic radiation can be exploited to inactivate coronaviruses. Previous studies show that 222-nm far-Ultraviolet C (far-UVC) light inactivates airborne influenza virus efficiently. Considering the similar genomic sizes of all human coronaviruses, other human coronaviruses, such as SARS-CoV-2, would be expected to be inactivated by far-UVC with a similar efficacy. Taking this into account, it is concluded that exposure to far-UVC can be introduced as a safe method that significantly reduces the ambient level of airborne coronaviruses in crowded places. Biomolecules, particularly proteins, strongly absorb ultraviolet radiation at a wavelength of around 200 nm. Given this consideration, far-UVC has a limited ability to permeate biological materials. Thus, for example, in only around 0.3 mm of tissue, the intensity of 200-nm UV radiation is decreased by half, compared to tissue penetration of about 3 mm at 250 nm. This paper aims to answer the key question of whether far-UVC can penetrate SARS-CoV-2 inside inhalable respiratory droplets (with diameters up to 100 µm).

Arc welding safety zones determination as a function of the UV radiation

Welding technology is a useful and common technology of the industry. Even though this process establishes unhealthy effects (smoke, heat, UV, or infrared radiation, etc.). About the welders’ healthy and the environmental safety requirements the dangerous radiation area determination is very important. In this research, the authors use the literature data of the gas metal arc welding established UV radiation intensity like the effect of the different welding parameters and the effect of the distance from the UV source. The goal of the authors is to determine different safety level zones around the welder or welder robot as a function of the UV radiation intensity.