Use Of Cross-linking Research Articles

MzIdentML 1.3.0 - Essential progress on the support of crosslinking and other identifications based on multiple spectra.

The mzIdentML data format, originally developed by the Proteomics Standards Initiative in 2011, is the open XML data standard for peptide and protein identification results coming from mass spectrometry. We present mzIdentML version 1.3.0, which introduces new functionality and support for additional use cases. First of all, a new mechanism for encoding identifications based on multiple spectra has been introduced. Furthermore, the main mzIdentML specification document can now be supplemented by extension documents which provide further guidance for encoding specific use cases for different proteomics subfields. One extension document has been added, covering additional use cases for the encoding of crosslinked peptide identifications. The ability to add extension documents facilitates keeping the mzIdentML standard up to date with advances in the proteomics field, without having to change the main specification document. The crosslinking extension document provides further explanation of the crosslinking use cases already supported in mzIdentML version 1.2.0, and provides support for encoding additional scenarios that are critical to reflect developments in the crosslinking field and facilitate its integration in structural biology. These are: (i) support for cleavable crosslinkers, (ii) support for internally linked peptides, (iii) support for noncovalently associated peptides, and (iv) improved support for encoding scores and the corresponding thresholds.

In Vivo Proximity Cross-Linking and Immunoprecipitation of Cell Wall Epitopes Identify Proteins Associated with the Biosynthesis of Matrix Polysaccharides.

Identification of proteins involved in cell wall matrix polysaccharide biosynthesis is crucial to understand plant cell wall biology. We utilized in vivo cross-linking and immunoprecipitation with cell wall antibodies that recognized xyloglucan, xylan, mannan, and homogalacturonan to capture proteins associated with matrix polysaccharides in Arabidopsis protoplasts. The use of cross-linkers allowed us to capture proteins actively associated with cell wall polymers, including those directly interacting with glycans via glycan-protein (GP) cross-linkers and those associated with proteins linked to glycans via a protein-protein (PP) cross-linker. Immunoprecipitations led to the identification of 65 Arabidopsis protein IDs localized in the Golgi, ER, plasma membrane, and others without subcellular localization data. Among these, we found several glycosyltransferases directly involved in polysaccharide synthesis, along with proteins related to cell wall modification and vesicle trafficking. Protein interaction networks from DeepAraPPI and AtMAD databases showed interactions between various IDs, including those related to cell-wall-associated proteins and membrane/vesicle trafficking proteins. Gene expression and coexpression analyses supported the presence and relevance of the proteins to the cell wall processes. Reverse genetic studies using T-DNA insertion mutants of selected proteins revealed changes in cell wall composition and saccharification, further supporting their potential roles in cell wall biosynthesis. Overall, our approach represents a novel approach for studying cell wall polysaccharide biosynthesis and associated proteins, providing advantages over traditional immunoprecipitation techniques. This study provides a list of putative proteins associated with different matrix polysaccharides for further investigation and highlights the complexity of cell wall biosynthesis and trafficking within plant cells.

Analysis of load distribution after transpedicular stabilization of burst fractures in the thoracolumbar junction

Background. In the structure of all traumatic spine injuries, the thoracolumbar junction is predominant, accounting for over 53 % of all vertebral fractures. One of the most clinically significant types of injuries in this area are burst fractures. The purpose was to study the stress-strain state of the thoracolumbar spine model with a burst fracture of the Th12 vertebra in various transpedicular fixation options under compression load. Materials and methods. The study developed and investigated a finite element model of the thoracolumbar spine with a burst fracture of the Th12 vertebra. The burst fracture was modeled by dividing the vertebral body of the Th12 into several planes, transforming it into separate fragments. The gaps between these fragments were filled with a material that simulated the interfragmentary regenerate. Variants of transpedicular stabilization using different types of screws, mono- or bicortical, and with or without cross-links, were examined. The model was analyzed under compression load. Results. The maximum level of stress among the bone structures directly involved in fixation was registered in the L2 vertebral body. It amounted to 19.9, 15.6, 19.4, and 15.1 MPa, respectively, for models with monocortical screws without cross-links, bicortical screws without cross-links, monocortical screws with cross-links, bicortical screws with cross-links. Simultaneously, the zone of screw entry into the arch of this vertebra shows values of 10.1, 15, 10.2, and 14.3 MPa for these models, respectively. Peak loads on the metal structure elements are observed on the rods, amounting to 212.5, 159.6, 203.7, 142.8 MPa, respectively, for the considered models. Conclusions. The results of the study showed that under the influence of compression load when modeling a burst fracture of the thoracolumbar junction, the use of long screws leads to a reduction in stress levels, both in the elements of the metal structure and in the bone elements of the model, while the use of cross-links has a negligible effect.

Comparison of refractive surgeries (SMILE, LASIK, and PRK) with and without corneal crosslinking: systematic review and meta-analysis.

Corneal crosslinking (CXL) is used for treating keratoconus and post-laser in situ keratomileusis ectasia. However, refractive surgery is not usually performed with prophylactic CXL. Therefore, we performed a meta-analysis comparing outcomes of refractive surgeries with vs without prophylactic CXL. We systematically searched databases for studies comparing refractive surgeries for myopic correction with vs without prophylactic corneal crosslinking. Review Manager 5.4.1 was used to perform statistical analysis. We included 2820 eyes from 28 studies. Compared with refractive surgery alone, surgery with prophylactic CXL resulted in decreased central corneal thickness, corrected distance visual acuity logMAR, and safety and efficacy indices. There were no significant differences in postoperative uncorrected distance visual acuity of 20/20 or better at ≥12 months and other visual outcomes among both groups. More randomized controlled trials with standard crosslinking protocols are needed to analyze the prophylactic use of crosslinking with refractive surgeries.

Overview of Tissue Engineering and Drug Delivery Applications of Reactive Electrospinning and Crosslinking Techniques of Polymeric Nanofibers with Highlights on Their Biocompatibility Testing and Regulatory Aspects.

Traditional electrospinning is a promising technique for fabricating nanofibers for tissue engineering and drug delivery applications. The method is highly efficient in producing nanofibers with morphology and porosity similar to the extracellular matrix. Nonetheless, and in many instances, the process has faced several limitations, including weak mechanical strength, large diameter distributions, and scaling-up difficulties of its fabricated electrospun nanofibers. The constraints of the polymer solution's intrinsic properties are primarily responsible for these limitations. Reactive electrospinning constitutes a novel and modified electrospinning techniques developed to overcome those challenges and improve the properties of the fabricated fibers intended for various biomedical applications. This review mainly addresses reactive electrospinning techniques, a relatively new approach for making in situ or post-crosslinked nanofibers. It provides an overview of and discusses the recent literature about chemical and photoreactive electrospinning, their various techniques, their biomedical applications, and FDA regulatory aspects related to their approval and marketing. Another aspect highlighted in this review is the use of crosslinking and reactive electrospinning techniques to enhance the fabricated nanofibers' physicochemical and mechanical properties and make them more biocompatible and tailored for advanced intelligent drug delivery and tissue engineering applications.

Analysis of factors associated with the failure of treatment in thoracolumbar burst fractures treated with short-segment posterior spinal fixation

BackgroundThe treatment of thoracolumbar burst fractures continues to pose challenges. Although short-segment posterior spinal fixation (SSPSF) has shown satisfactory clinical outcomes, it is accompanied by a relatively high rate of treatment failure. This study aimed to assess factors associated with treatment failure in thoracolumbar burst fractures treated with SSPSF.MethodsThe clinical data of 241 consecutive patients with a traumatic thoracolumbar burst fracture who underwent SSPSF at our center between Apr 2016 and Apr 2021 were retrospectively reviewed. Patients were divided into two groups (failure of the treatment group and non-failure of the treatment group). We compared potential risk factors for the failure of treatment including age, gender, body mass index, smoking, diabetes, vertebral body compression rate, use of crosslinks, percentage of anterior height compression, presence of index level instrumentation, Cobb angle, interpedicular distance (IPD), canal compromise, Load Sharing Classification (LSC) score, use of posterolateral fusion, and pain intensity between the two groups.ResultsA sum of 137 (56.8%) males and 104 (43.2%) females were enrolled where the mean age and follow-up of the participants were 48.34 ± 10.23 years and 18.67 ± 5.23 months, respectively. Treatment failure was observed in 34 cases (14.1%). The results of the binary logistic regression analysis revealed that the lack of index level instrumentation (OR 2.21; 95% CI 1.78–3.04; P = 0.014), LSC score (odds ratio [OR] 2.64; 95% confidence interval [95% CI], 1.34–3.77; P = 0.007), and IPD (OR 1.77; 95% CI 1.51–2.67; P = 0.023) were independently associated with a higher rate of failure of treatment.ConclusionsThe findings of this study revealed that increased rates of treatment failure in thoracolumbar burst fractures treated with SSPSF were associated with factors such as the absence of index level instrumentation, higher LSC scores, and larger IPD. These findings could be helpful in the proper management of patients with unstable thoracolumbar burst fractures.

The biomechanical state of the thoracolumbar junction with various options of transpedicular fixation under flexion load

Introduction. Morphological and biomechanical features of the thoracolumbar junction determine the large number of cases of traumatic bone injuries. Reconstructive and stabilizing surgeries performed in this area, due to the significant load on both the elements of hardware and bony structures, require high reliability of fixation. Objective. To study the stress-strain state of the model of the thoracolumbar section of the spine after the Th12-L1 vertebrae resection with various options of transpedicular fixation under the influence of flexion load. Materials and methods. The stress-strain state of the mathematical finite-element model of the thoracolumbar section of the human spine under the influence of flexion load was studied. The model simulated the condition after surgery for a significant traumatic lesion of the thoracolumbar junction with laminectomy, facetectomy, and corpectomy of the Th12 and L1 vertebrae. Four variants of transpedicular fixation were studied (using short or long bicortical fixation screws, two crosslinks and without them). Control points of the model characterizing the load distribution both in bony structures and on metal elements of fusion and body replacement systems were studied. Results. Crosslinks have the greatest effect on reducing the level of stress both in the bony elements of the models and in the metal elements. When comparing the length of the screws, the use of monocortical screws was determined to have minor biomechanical advantages. The stress analysis of the area of the screw entry into the pedicle of the arch of the fixed vertebrae (clinically significant zone) revealed that in the model with short screws and without crosslinks, the stress for the vertebrae Th10, Th11, L2 and L3 is 5.0, 1.9, 7.8 and 13.6 MPa, respectively, while the presence of crosslinks reduces the corresponding values to 4.6, 1.9, 7.3 and 12.7 MPa. In models with bicortical screws, the corresponding values are 5.1, 2.3, 10.2, and 12.7 MPa in the absence of crosslinks and 4.7, 1.8, 9.9, and 12.2 MPa with the presence. A similar trend is observed in other control points. When comparing the results with the compression load in the models studied earlier, it was established that flexion causes an increase in the stress of the models with monocortical screws by an average of 33.7%, with bicortical screws by 39.6%. Conclusions. In case of flexion load, the use of crosslinks makes it possible to reduce the level of stress in all control points of the models, regardless of the length of the used transpedicular screws, while the length of the screws does not have a fundamental effect on the stress distribution.

MATHEMATICAL MODELING OF VARIANTS OF TRANSPEDICULAR FIXATION AT THE THORACOLUMBAR JUNCTION AFTER ТHХІІ VERTEBRECTOMY DURING TRUNK BACKWARD BENDING

Fractures at the thoracolumbar junction are the most common traumatic spinal injuries. Advances in instrumentation for vertebral body replacement have significantly improved surgical techniques.However, the biomechanical characteristics of stabilizing surgeries have been insufficiently studied. Objective. To investigate the stressstrain state (SSS) of a mathematical finite element model of the humanthoracolumbar spine during trunk backward bending after ТhХІІ vertebra resection, considering different transpedicular fixation options. Methods. A mathematical finite element model of the humanthoracolumbar spine — ThIX‒LV vertebrae — was developed. The ТhХІІ vertebra was removed, and an interbody support and transpedicularsystem with 8 screws were implanted to simulate the postsurgical state after a ТhХІІ burst fracture with wide laminectomy, facetectomy, and corpectomy. The influence of transpedicular screw length and the presence of cross-links on the SSS of the model wasexamined. Results. The use of bicortical screws reduced stress levels in the bone elements of the model, except in the regions around the screws in the lumbar vertebrae, when compared to short screws.Installing cross-links decreased stress levels at all control points compared to models without cross-links. Specifically, in the presence of cross-links, the SSS values at the entry points of the short screwsinto the vertebral bodies of ThX, ThXI, LI, and LII were 2.3, 1.8, 1.2, and 5.0MPa, respectively, compared to 2.7, 2.0, 1.5, and 6.1 MPa in the models without cross-links. In the case of bicortical screwswithout cross-links, the stress values at the screw entry points into the pedicles of the corresponding vertebrae were 2.9, 1.5, 8.2, and 11.2 MPa, respectively, compared to 2.7, 1.5, 7.5, and 10.2 MPa in the models with cross-links. Conclusions. When the trunk is tilted backward, the use of cross-links reduces stress levels at all control points in the models, regardless of the screw length used. Bicortical transpedicular screws increase stress levels on the screws themselves and in the lumbar vertebral bodies surrounding them.

Is spinal height gain associated with rod orientation and the use of cross-links in magnetically controlled growing rods in early-onset scoliosis?

Optimal orientation for magnetically controlled growing rods (MCGRs) is unclear. The objective of this study was to investigate associations of rod orientation with implant-related complications (IRCs) and spinal height gains. Using an international early-onset scoliosis (EOS) database, we retrospectively reviewed 57 patients treated with dual MCGRs from May 2013 to July 2015 with minimum 2-year follow-up. Outcomes of interest were IRCs and left/right rod length gains and thoracic (T1-T12) and spinal (T1-S1) heights. We compared patients with two rods lengthened in the cephalad ( standard; n = 18) versus opposite ( offset; n = 39) directions. Groups did not differ in age, sex, BMI, duration of follow-up, EOS cause, ambulatory status, primary curve magnitude, baseline thoracic height, or number of distractions/year. We compared patients whose constructs used ≥1 cross-link (CL group; n = 22) versus no CLs (NCL group; n = 35), analyzing thoracic height gains per distraction ( α = 0.05). Offset and standard groups did not differ in left or right rod length gains overall or per year or in thoracic or spinal height gain. Per distraction, the CL and NCL groups did not differ significantly in left or right rod length or thoracic or spinal height gain. Complications did not differ significantly between rod orientation groups or between CL groups. MCGR orientation and presence of cross-links were not associated with differences in rod length gain, thoracic height, spinal height, or IRCs at 2-year follow-up. Surgeons should feel comfortable using either MCGR orientation. Level of evidence: 3, retrospective.

Effect of Cross-Linkers on the Processing of Lignin/Polyamide Precursors for Carbon Fibres

This work reports the use of cross-linkers in bio-based blends from hydroxypropyl-modified lignin (TcC) and a bio-based polyamide (PA1010) for possible use as carbon fibre precursors, which, while minimising their effects on melt processing into filaments, assist in cross-linking components during the subsequent thermal stabilisation stage. Cross-linkers included a highly sterically hindered aliphatic hydrocarbon (Perkadox 30, PdX), a mono-functional organic peroxide (Triganox 311, TnX), and two different hydroxyalkylamides (Primid® XL-552 (PmD 552) and Primid® QM-1260 (PmD 1260)). The characterisation of melt-compounded samples of TcC/PA1010 containing PdX and TnX indicated considerable cross-linking via FTIR, DSC, DMA and rheology measurements. While both Primids showed some evidence of cross-linking, it was less than with PdX and TnX. This was corroborated via melt spinning of the melt-compounded chips or pellet-coated TcC/PA1010, each with cross-linker via a continuous, sub-pilot scale, melt-spinning process, where both Primids showed better processability. With the latter technique, while filaments could be produced, they were very brittle. To overcome this, melt-spun TcC/PA1010 filaments were immersed in aqueous solutions of PmD 552 and PmD 1260 at 80 °C. The resultant filaments could be easily thermally stabilised and showed evidence of cross-linking, producing higher char residues than the control filaments in the TGA experiments.

Knowledge, Attitude, and Practices on the Use of Cross-Linkers During Dentin Bonding among Practitioners Specialised in Conservative Dentistry

Introduction: Biomodification involves the application of exogenous cross-linkers to stabilise collagen molecules through the formation of inter- and intramolecular cross-links. This approach shows potential for improving bonding performance in adhesive restorations. Aim: To assess the Knowledge, Attitude, and Practices (KAP) regarding the use of cross-linkers during dentin bonding among practitioners specializing in conservative dentistry. Materials and Methods: An online survey was conducted among dentists practicing conservative dentistry across India from September 2022 to November 2022. The survey consisted of a semi-validated questionnaire with 24 questions and was distributed through personal email and social media. Data was collected over a period of three months and analysed using statistical evaluation in the Statistical Package for the Social Sciences (SPSS) via chi-square test. Results: A total of 181 responses were received. Of the study population, 68.2 percent became aware of biomodification through articles in various journals. According to the study, 85 individuals (47%) acknowledged that using cross-linkers could enhance the mechanical properties of dentin by stabilising collagen. However, it is interesting to note that only 33 individuals (18.2%) actually incorporated biomodification techniques in their dental practice. Conclusion: Nearly half of the study population were aware of the use of cross-linkers to enhance dentin strength, prevent degradation and preserve resin-dentin bonds, inhibit demineralisation, and prevent root caries. However, only 18.2% of the participants reported practicing biomodification procedures in their dental practice.

Is it a requirement or a preference to use cross-links in lumbar instrumentation?

Background/Aim: The use of cross-links (CL) is controversial due to reasons such as cost increases and instrument redundancy. While there are many biomechanical studies, the clinical data is limited. The aim of this study is to present the clinical effects of CL by putting forward postoperative clinical outcomes and long-term results of patients with (CL+) and without (CL-) CL augmentation. Methods: In this retrospective cohort study, patients who underwent lumbar posterior instrumentation with CL+ (n = 164) and without CL- (n = 111) augmentation were evaluated. Demographic data, surgical results, preoperative and postoperative visual analogue scale (VAS), the Oswestry Disability Index (ODI) differences, and pseudoarthrosis and adjacent segment disease (ASD)-related recurrence for more than three years of follow-up were determined. Data of CL+ and CL- groups were compared. Results: CL+ and CL- groups were similar in terms of age and gender (P = 0.319 and P = 0.777, respectively) There was no difference between the two groups in terms of bleeding amount, duration of surgery, and duration of hospitalization (P = 0.931, P = 0.669 and P = 0.518, respectively). Groups were similar in terms of VAS and ODI differences (P = 0.915 and P = 0.983, respectively), yet there was one case of infection in the CL+ group and two cases of infection detected in the CL- group. There were 13 ASDs in the CL+ group, and eight ASDs in the CL- group. Pseudoarthrosis was seen seven times in the CL+ group, while it was four in the CL- group. Conclusion: It was observed that adding CL in patients who underwent lumbar instrumentation did not change the early period surgical results. The prevalence of complications was compatible with the scientific literature. In our study, there was no preventive advantage in terms of clinical or postoperative complications found in the use of CL.

Chemical modification of acellular fish skin as a promising biological scaffold by carbodiimide cross-linker for wound healing.

Biological matrices can be modified with cross-linkers to improve some of their characteristics as scaffolds for tissue engineering. In this study, chemical cross-linker 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) was used with different ratios (5, 10, 20, 30, and 40 mM) to improve properties such as mechanical strength, denaturation temperature, and degradability of the acellular fish skin as a biological scaffold for tissue engineering applications. Morphological analysis showed that the use of cross-linker at low concentrations had no effect on the structure and textiles of the scaffold, while increasing mechanical strength, denaturation temperature, and degradation time. Cytotoxicity and cellular studies showed that the optimal cross-linker concentration did not significantly affect cell viability as well as cell adhesion. In general, utilising the carbodiimide cross-linker with the optimal ratio can improve the characteristics and function of the biological tissues such as acellular fish skin.

Self-assembled albumin nanoparticles for redox responsive release of curcumin

The synthesis of stimuli-responsive protein-based nanocarriers often involves multi-step processing or use of toxic crosslinkers, which impede their wide-spread utilization as drug delivery systems. In this study, we report a facile, self-assembly based method for the synthesis of redox responsive albumin nanocarriers (<150 nm) without the use of crosslinkers. Curcumin (CUR) was encapsulated into these self-assembled albumin nanoparticles with 83.22% encapsulation efficiency and 8.33% loading capacity. These CUR loaded redox responsive albumin nanoparticles displayed glutathione (GSH) triggered CUR release due to the reduction of disulfide bonds in the protein structure. The release studies show that in the presence of GSH, 61% of the CUR is released, whereas in GSH-free environment only 18% of the drug is released within the first 12 h. In vitro studies performed on triple negative human breast cancer cells (MDA-MB-231) show that encapsulation of CUR provided enhanced cytotoxicity compared to free CUR. Furthermore, studies on the mitochondrial structure of these cells confirm that the drug loaded nanoparticles lead to the changes in mitochondria stress conditions by reacting with the GSH in the cells.

Obtaining a freeze-dried biomaterial for skin regeneration: Reinforcement of the microstructure through the use of crosslinkers and in vivo application

Scaffolds are one of the emerging alternatives to the traditional techniques of tissue and organ repair and regeneration. They offer the necessary support to the healthy formation of new tissues. Highly porous and interconnected scaffolds for skin regeneration were manufactured and studied with two types of crosslinking, genipin and glutaraldehyde. Two accessible biopolymers, chitosan and gelatin, were used together as matrix and were incorporated with snail mucus and aloe vera like additives. The microstructure and thermal properties analysis determined that the best crosslinker was glutaraldehyde, presenting a more homogeneous range of pore sizes, uniform distribution of the porous structure and higher denaturation temperatures showing a greater degree of crosslinking and stabilization. Thus, in vivo studies were conducted with the implantation of these scaffolds in mice after causing a burn wound. The addition of Aloe vera in the scaffolds is highlighted, apparently the large number of glycoproteins present in Aloe vera were able to integrate well into the scaffolds. Their diffusion towards the damaged tissue allowed accelerated healing and injury reduction. The material made with aloe vera crosslinked with glutaraldehyde showed promising results in accelerating the healing process in vivo studies, suggesting a great skin substitute for wound healing applications.

Crosslinked graphene oxide membranes: Enhancing membrane material conservation and optimisation

BackgroundGraphene Oxide (GO) has recently shown great promise in water purification as a potential substitute to conventional membrane materials. However, GO membranes face some challenges associated to their swelling due to the accumulation of water molecules in their oxidized regions. The use of crosslinkers has been proven as an effective way to improve GO membranes stability and performance. Nevertheless, optimisations to efficiently use materials and resources are a necessity. These include the determination of the influence of GO and crosslinker amounts on membrane structure, operation, and efficiency. MethodsConsequently, in this study crosslinked membranes with different GO and p-phenylenediamine (crosslinker) concentrations were fabricated to establish relationships between the quantity of the selected materials and membranes performance. FESEM was undertaken to investigate the structural quality together with thickness measurements. The performance of the membranes was evaluated via a pressure assisted nanofiltration cell using aqueous methylene blue (MB) as feed solution. Significant findingsA notable enhancement in MB separation from around 75 to 98% was observed at an increasing GO and crosslinker concentrations. The permeation flux decreased correspondingly owing to tortuosity lengthening at higher GO concentrations. Based on performance rates and XPS characterizations the optimum crosslinker and GO concentrations were deduced.

A Review on various methods for the Cross-linking of Polymers

Cross-Linking the carbon atoms suffices to transform such material intoa superior material that may be resistant to temperature, pressure, corrosion, and that can be used in a variety of applications. Cross Linking is a stabilization process in polymer chemistry which leads to multidimensional extension of polymeric chain resulting in network structure. Cross-link is a bond which links one polymer chain to other. It can be ionic or covalent. Cross Linking changes a liquid polymer into ‘solid’ or ‘gel’ by restricting the ability of movement. When polymer chains are linked together by cross-links, they lose some of their ability to move as individual polymer chains. A liquid polymer (where the chains are freely flowing) can be turned into a ‘solid’ or ‘gel’ by cross-Linking the chains together. Cross Linking increases the molecular mass of a polymer. Cross-linked polymers are important because they are mechanically strong and resistant to heat, wear and attack by solvents. Cross-link property has been used to improve the insolubility, mechanical strength, stiffness, and rigidity of polymer microbeads having potential applications in solid-phase synthesis, solid-phase extraction, and biomedical fields. Hydrogels represents a class of high-water content polymers with physical or chemical crosslinks. Their physical properties are similar to soft tissues. A popular approach to attaining controlled drug delivery from polymer-based systemsinvolves the use of cross-linkers. In order to improve the properties of polymers specific toothier applications, they can be modified by either physical cross-linkers (high pressure, irradiation) or chemical cross-linkers (glutraldehyde, genipin).Therefore, synthesis of polymer with desired cross-linker (hydrophilic/hydrophobic/rigid/flexible) and concentration of cross-linker (cross-link density) is an important.Polyethylene (PE) once cross linked is advantageously employed in the fabrication of blanket insulation for electrical and telephone wires, pipes for the transport of cold and hot liquids, prostheses for the human body. In the present review, chemical cross-Linking by free-radical, condensation, UV radiation, and small-molecule cross-Linking are discussed in details.

Crosslinking Super Yellow to produce super OLEDs: Crosslinking with azides enables improved performance

AbstractAn increasing number of organic light‐emitting diodes (OLEDs) is nowadays based on the use of polymers as the emissive material. For this material class in particular, solution‐processing of the OLEDs has gained traction in both research and industry. However, in order to access multilayer material systems, orthogonal solvents must be used to prevent dissolution of previously prepared layers. The use of crosslinkers can facilitate this production method by reducing the number of orthogonal solvents needed since insoluble networks are generated. In this work, a novel bisazide crosslinker is employed to insolubilize Super Yellow, a polyphenylene‐vinylene emitter. This allows the use of an additional poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine electron blocking layer (EBL) from the same solvent. Devices including the blocking layer show improved efficacies compared to reference devices without the additional EBL, while also maintaining the emission spectrum. Using the upscalable technique of doctor blading, OLEDs were fabricated which showed a particularly noticeable effect of the blocking layer with a nearly twofold increase in luminance and a 56% increase in current efficacy.

Crosslinking as a treatment for infectious crystalline keratopathy

Infectious crystalline keratopathy (ICK) is a rare cornea disease, manifested by gray-and-white tree-like or needle-like stromal opacities with minimal signs of inflammation. The disease is caused by the colonization of microorganisms on the corneal stroma and their formation of biofilms, making them extremely resistant to treatment with antibiotics and to the immune response of the patient. Typically, the most important risk factor for ICK development is the presence of an immunodeficiency cornea condition with long-term topical steroid therapy, which is normally prescribed after keratoplasty. Two clinical cases of ICK are discussed in which the reduction of topical glucocorticoids and the intensive use of antibiotics did not result in positive clinical changes. Only after an accelerated crosslinking procedure (PACK-CXL), needlelike opacities disappeared in the area of microbial invasion and signs of infiltration appeared, indicating the restoration of the local immune response. This phenomenon is likely due to the destruction of the biofilm and the microbial agents themselves, which afterwards contributed to a more effective impact of the antibacterial drug. This combined treatment led to resorption of the inflammatory focus with the formation of local opacification. The effectiveness of PACK-CXL in infectious processes is explained by the effects of both riboflavin and ultraviolet radiation. No literature references on the use of cross-linking in the treatment of ICK are available. In our opinion, cross-linking in early ICK patients after keratoplasty is justified by the inability, in some cases, to completely discontinue glucocorticosteroid therapy, as this will greatly increase the chances of rejection and graft jailure. PACK-CXL can be an effective way of destroying the biofilm in the corneal stroma.

A Review on Various Methods for the Cross-linking of Polymers

Cross-Linking the carbon atoms suffices to transform such material intoa superior material that may be resistant to temperature, pressure, corrosion, and that can be used in a variety of applications. Cross Linking is a stabilization process in polymer chemistry which leads to multidimensional extension of polymeric chain resulting in network structure. Cross-link is a bond which links one polymer chain to other. It can be ionic or covalent. Cross Linking changes a liquid polymer into ‘solid’ or ‘gel’ by restricting the ability of movement. When polymer chains are linked together by cross-links, they lose some of their ability to move as individual polymer chains. A liquid polymer (where the chains are freely flowing) can be turned into a ‘solid’ or ‘gel’ by cross-Linking the chains together. Cross Linking increases the molecular mass of a polymer. Cross-linked polymers are important because they are mechanically strong and resistant to heat, wear and attack by solvents. Cross-link property has been used to improve the insolubility, mechanical strength, stiffness, and rigidity of polymer microbeads having potential applications in solid-phase synthesis, solid-phase extraction, and biomedical fields. Hydrogels represents a class of high-water content polymers with physical or chemical crosslinks. Their physical properties are similar to soft tissues. A popular approach to attaining controlled drug delivery from polymer-based systemsinvolves the use of cross-linkers. In order to improve the properties of polymers specific toothier applications, they can be modified by either physical cross-linkers (high pressure, irradiation) or chemical cross-linkers (glutraldehyde, genipin).Therefore, synthesis of polymer with desired cross-linker (hydrophilic/hydrophobic/rigid/flexible) and concentration of cross-linker (cross-link density) is an important.Polyethylene (PE) once cross linked is advantageously employed in the fabrication of blanket insulation for electrical and telephone wires, pipes for the transport of cold and hot liquids, prostheses for the human body. In the present review, chemical cross-Linking by free-radical, condensation, UV radiation, and small-molecule cross-Linking are discussed in details.