Unpurified PCR Products Research Articles

A simple and efficient cloning system for CRISPR/Cas9-mediated genome editing in rice.

Rapidly growing genetics and bioinformatics studies provide us with an opportunity to obtain a global view of the genetic basis of traits, but also give a challenge to the function validation of candidate genes. CRISPR/Cas9 is an emerging and efficient tool for genome editing. To construct expression clones for the CRISPR/Cas9, most current methods depend on traditional cloning using Gateway reaction or specific type IIS restriction enzymes and DNA ligation, based on multiple steps of PCR. We developed a system for introducing sgRNA expression cassette(s) directly into plant binary vectors in one step. In this system, one sgRNA expression cassette(s) is generated by an optimized multiplex PCR, in which an overlapping PCR took place. Whilst, two sgRNA expression cassettes were amplified in a single round of PCR. Subsequently, an LR or Golden gate reaction was set up with unpurified PCR product and befitting destination vector. We are able to construct expression clones within 36 h, which greatly improves efficiency and saves cost. Furthermore, the efficiency of this system was verified by an agrobacterium-mediated genetic transformation in rice. The system reported here provides a much more efficient and simpler procedure to construct expression clones for CRISPR/Cas9-mediated genome editing.

In situ, Cell-free Protein Expression on Microarrays and Their Use for the Detection of Immune Responses.

Until recently, whole-proteome microarrays for comprehensive studies of protein interactions were mostly produced by individual cloning and cellular expression of very many open reading frames, followed by protein isolation and purification as well as array production. To overcome this cumbersome process, we have developed a method to generate microarrays representing entire proteomes by a combination of multiple spotting and on-chip, cell-free protein expression. Here, we describe the protocol for the production of bacterial protein microarrays. With slight adaptations, however, the procedure can be applied to the proteome of any organism. Expression constructs of each gene are generated by PCR on bacterial genomic DNA followed by a common secondary amplification that is adding relevant regulative elements to either end of the constructs. The unpurified PCR-products are spotted onto the microarray surface. Full-length proteins are directly expressed in situ in a cell-free manner and stay attached to the surface without further action. As an example of a typical application, we describe here the proteome-wide analysis of the immune response to a bacterial infectious agent by characterizing the binding profiles of the antibodies in patient sera.

New tools for high-throughput expression of fungal secretory proteins in Saccharomyces cerevisiae and Pichia pastoris.

SummaryHeterologous protein expression in yeast, mostly in Saccharomyces cerevisiae and Pichia pastoris, is a well‐established and widely used technique. It typically requires the construction of an expression vector in Escherichia coli containing the foreign gene and its subsequent transformation into yeast. Although simple, this procedure has important limitations for the expression of large numbers of proteins, that is, for the generation of protein libraries. We describe here the development of a novel system for the easy and fast expression of heterologous proteins both in S. cerevisiae and in P. pastoris, under the control of the GAL1 and AOX1 promoters respectively. Expression in S. cerevisiae requires only the transformation of yeast cells with an unpurified PCR product carrying the gene to be expressed, and the expression of the same gene in P. pastoris requires only the isolation of the plasmid generated in S. cerevisiae and its transformation into this second yeast, thus making this system suitable for high‐throughput projects. The system has been tested by the extracellular expression of 30 secretory fungal proteins.

Electrochemical Detection of Bacillus anthracis Protective Antigen Gene Using DNA Biosensor Based on Stem−Loop Probe

The presented study is focused on the development of repetitive, fast and versatile “on-off” signaling electrochemical genosensor for detection of pagA gene of Bacillus anthracis. Such a sensor will be further used in the portable devices dedicated to molecular diagnostic. The DNA molecular beacon probe was immobilized onto gold electrodes in its folded state through the alkanethiol linker at the 5’-end, while the 3’-end was labeled with methylene blue redox molecule. Initial optimization was conducted for HPLC purified cDNA. Nonetheless application of such prepared biosensor for unpurified PCR product required further investigations. As the sensor response was significantly dependent on the stem-loop architecture, the three different hairpin probes were analyzed. The detected sequence was interior to amplicon, identical as in case of cDNA. The developed “on-off” genosensor allows for detection, in 5 minute, the pagA gene sequence at the level of 5.7 nM with 22.9–86.0 nM linear detection range also in the great excess of other DNA presented in the sample. Both LOD and linear range were significantly improved in case of longer assay time. The biosensor proved its applicability also in detection of pagA gene of Bacillus anthracis in PCR samples amplified with reduced number of cycles.

Evaluation and rational design of guide RNAs for efficient CRISPR/Cas9-mediated mutagenesis in Ciona

The CRISPR/Cas9 system has emerged as an important tool for various genome engineering applications. A current obstacle to high throughput applications of CRISPR/Cas9 is the imprecise prediction of highly active single guide RNAs (sgRNAs). We previously implemented the CRISPR/Cas9 system to induce tissue-specific mutations in the tunicate Ciona. In the present study, we designed and tested 83 single guide RNA (sgRNA) vectors targeting 23 genes expressed in the cardiopharyngeal progenitors and surrounding tissues of Ciona embryo. Using high-throughput sequencing of mutagenized alleles, we identified guide sequences that correlate with sgRNA mutagenesis activity and used this information for the rational design of all possible sgRNAs targeting the Ciona transcriptome. We also describe a one-step cloning-free protocol for the assembly of sgRNA expression cassettes. These cassettes can be directly electroporated as unpurified PCR products into Ciona embryos for sgRNA expression in vivo, resulting in high frequency of CRISPR/Cas9-mediated mutagenesis in somatic cells of electroporated embryos. We found a strong correlation between the frequency of an Ebf loss-of-function phenotype and the mutagenesis efficacies of individual Ebf-targeting sgRNAs tested using this method. We anticipate that our approach can be scaled up to systematically design and deliver highly efficient sgRNAs for the tissue-specific investigation of gene functions in Ciona.

Enhancing capacitive DNA biosensor performance by target overhang with application on screening test of HLA-B*58:01 and HLA-B*57:01 genes

A highly sensitive label-free DNA biosensor based on PNA probes immobilized on a gold electrode was used to detect a hybridization event. The effect of a target DNA overhang on the hybridization efficiency was shown to enhance the detected signal and allowed detection at a very low concentration. The sensors performances were investigated with a complementary target that had the same length as the probe, and the signal was compared to the target DNAs with different lengths and overhangs. A longer target DNA overhang was found to provide a better response. When the overhang was on the electrode side the signal enhancement was greater than when the overhang was on the solution side due to the increased thickness of the sensing surface, hence produced a larger capacitance change. Using conformationally constrained acpcPNA probes, double stranded DNA was detected sensitively and specifically without any denaturing step. When two acpcPNA probes were applied for the screening test for the double stranded HLA-B*58:01 and HLA-B*57:01 genes that are highly similar, the method differentiated the two genes in all samples. Both purified and unpurified PCR products gave comparable results. This method would be potentially useful as a rapid screening test without the need for purification and denaturation of the PCR products.

Agarose gel purification of PCR products for denaturing gradient gel electrophoresis results in GC-clamp deletion.

The 16S ribosomal RNA (rRNA) gene of marine archaeal samples was amplified using a nested PCR approach, and the V3 region of 16S rRNA gene of crab gut microbiota (CGM) was amplified using the V3 universal primer pair with a guanine and cytosine (GC)-clamp. Unpurified PCR products (UPPs), products purified from reaction solution (PPFSs), and products purified from gel (PPFGs) of above two DNA samples were used for denaturing gradient gel electrophoresis (DGGE) analysis, respectively. In contrast to almost identical band patterns shared by both the UPP and PPFS, the PPFGs were barely observed on the DGGE gel for both the marine archaea and CGM samples. Both PPFS and PPFG of CGM V3 regions were subjected to cloning. A small amount of positive clones was obtained for PPFS, but no positive clones were observed for PPFG. The melt curve and direct sequencing analysis of PPFS and PPFG of E. coli V3 region indicated that the Tm value of PPFG (82.35 ± 0.19 °C) was less than that of PPFS (83.81 ± 0.11 °C), and the number of shorter GC-clamps was significant higher in PPFG than in PPFS. The ultraviolet exposure experiment indicated that the ultraviolet was not responsible for the deletion of the GC-clamps. We conclude that the gel purification method is not suitable for DGGE PCR products or even other GC-rich DNA samples.

Target-selective homologous recombination cloning for high-throughput generation of monoclonal antibodies from single plasma cells

BackgroundMolecular cloning of functional immunoglobulin genes from single plasma cells is one of the most promising technologies for the rapid development of monoclonal antibody drugs. However, the proper insertion of PCR-amplified immunoglobulin genes into expression vectors remains an obstacle to the high-throughput production of recombinant monoclonal antibodies.ResultsWe developed a single-step cloning method, target-selective homologous recombination (TS-HR), in which PCR-amplified immunoglobulin variable genes were selectively inserted into vectors, even in the presence of nonspecifically amplified DNA. TS-HR utilizes Red/ET-mediated homologous recombination with a target-selective vector (TS-vector) with unique homology arms on its termini. Using TS-HR, immunoglobulin variable genes were cloned directly into expression vectors by co-transforming unpurified PCR products and the TS-vector into E. coli. Furthermore, the high cloning specificity of TS-HR allowed plasmids to be extracted from pools of transformed bacteria without screening single colonies for correct clones. We present a one-week protocol for the production of recombinant mouse monoclonal antibodies from large numbers of single plasma cells.ConclusionThe time requirements and limitations of traditional cloning procedures for the production of recombinant immunoglobulins have been significantly reduced with the development of the TS-HR cloning technique.

Species-independent translational leaders facilitate cell-free expression

Cell-free protein synthesis enables the rapid production and engineering of recombinant proteins. Existing cell-free systems differ substantially from each other with respect to efficiency, scalability and the ability to produce functional eukaryotic proteins. Here we describe species-independent translational sequences (SITS) that mediate efficient cell-free protein synthesis in multiple prokaryotic and eukaryotic systems, presumably through bypassing the early translation initiation factors. We use these leaders in combination with targeted suppression of the endogenous Leishmania tarentolae mRNAs to create a cell-free system based on this protozoan. The system can be directly programmed with unpurified PCR products, enabling rapid generation of large protein libraries and protein variants. L. tarentolae extract can produce up to 300 microg/ml of recombinant protein in 2 h. We further demonstrate that protein-protein and protein-small molecule interactions can be quantitatively analyzed directly in the translation mixtures using fluorescent (cross-) correlation spectroscopy.

Typing of Enteroviruses by Use of Microwell Oligonucleotide Arrays

We have developed a straightforward assay for the rapid typing of enteroviruses using oligonucleotide arrays in microtiter wells. The viral nucleic acids are concomitantly amplified and labeled during reverse transcription-PCR, and unpurified PCR products are used for hybridization. DNA strands are separated by alkaline denaturation, and hybridization is started by neutralization. The microarray hybridization reactions and the subsequent washes are performed in standard 96-well microtiter plates, which makes the method easily adaptable to high-throughput analysis. We describe here the assay principle and its potential in clinical laboratory use by correctly identifying 10 different enterovirus reference strains. Furthermore, we explore the detection of unknown sequence variants using serotype consensus oligonucleotide probes. With just two consensus probes for the coxsackievirus A9 (CVA9) serotype, we detected 23 out of 25 highly diverse CVA9 isolates. Overall, the assay involves several features aiming at ease of performance, robustness, and applicability to large-scale studies.

SNP genotyping of unpurified PCR products by sandwich-type affinity electrophoresis on a microchip with programmed autonomous solution filling

We demonstrate rapid single-nucleotide polymorphism (SNP) genotyping on a poly(dimethylsiloxane)-glass microchip. Sandwich-type affinity electrophoresis was employed to achieve sufficient specificity for reliable genotyping of unpurified PCR products. We tested three SNPs in different genes: CYP2D6 of artificial templates, and ALDH3A1 and CYP1A1 of human genomic samples. The target sequences were amplified by asymmetric PCR. For each SNP, we prepared a capture probe-poly(dimethylacrylamide) (CP-PDMA) conjugate and allele-specific, fluorescently-labeled detection probes (DPs). Prior to the electrophoresis, necessary solutions--the amplified sample, the CP-PDMA conjugate, the DPs, and a washer--were autonomously filled into their own regions of the microchannel in contact with each other. For precise control of this filling process, we have extended our published technique to a "programmed" version, in which additional passive stop valves synchronized the solution contacting events. Then we electrophoretically carried out a target DNA hybridization step, a DP hybridization step, and a washing step at the CP-PDMA conjugate region. This 3-step electrophoresis was completed in 2 min. The formation of the sandwich hybridization complex (CP-target-DP) was evaluated by fluorescence. Normalized fluorescence values of the different genotypes were clearly and reproducibly discriminated. The assay format presented here will be suitable for SNP genotyping at the point of care.

SERS-Melting: A New Method for Discriminating Mutations in DNA Sequences

The reliable discrimination of mutations, single nucleotide polymorphisms (SNPs), and other differences in genomic sequence is an essential part of DNA diagnostics and forensics. It is commonly achieved using fluorescently labeled DNA probes and thermal gradients to distinguish between the matched and mismatched DNA. Here, we describe a novel method that uses surface enhanced (resonance) Raman spectroscopy (SER(R)S) to follow denaturation of dsDNA attached to a structured gold surface. This denaturation is driven either electrochemically or thermally on SERS active sphere segment void (SSV) gold substrates. Using this method, we can distinguish between wild type, a single point mutation (1653C/T), and a triple deletion (DeltaF 508) in the CFTR gene at the 0.02 attomole level, and the method can be used to differentiate the unpurified PCR products of the wild type and DeltaF 508 mutation. Our method has the potential to provide small, rapid, sensitive, reproducible platforms for detecting genetic variations and sequencing genes.

Improvement of the sensitivity and resolution of PCR-SSCP analysis with optimized primer concentrations in PCR products

Polymerase chain reaction single-strand conformation polymorphism (PCR-SSCP) is a widely utilized screening method for detection of mutations. In this method, the target sequence of interest is amplified by PCR and separated as single-stranded molecules by electrophoresis in a nondenaturing polyacrylamide gel (Orita et al. 1989). However, the sensitivity and resolution of PCR-SSCP can be influenced by many parameters, including size and GC content of the PCR product (Li et al. 2003); gel temperature during electrophoresis (Chen et al. 1995); buffer composition (e.g. ionic strength, pH; Kukita et al. 1997); buffer additives, mainly glycerol, formamide, polyethylene glycol (Markoff et al. 1997; Paccoud et al. 1998); gel matrix composition and concentration (Savov et al. 1992), as well as primer concentration in PCR product (Cai and Touitou 1993). It is generally considered that specific PCR amplification is important in detection of mutations by using PCR-SSCP (Orita et al. 1989; Li et al. 2003). Moreover, it has been noted that addition of either forward or reverse primer in PCR product may apparently alter SSCP banding patterns, which is presumably caused by the interaction between primer(s) and single-strand DNAs (ssDNA) (Almeida et al. 1998; Hennessy et al. 1998). Previously, Cai and Touitou (1993) demonstrated that the lowest primer concentration in PCR product affecting SSCP banding patterns is around 6 nM, and that primer-concentration-dependent intermediate SSCP patterns appear in unpurified PCR product amplified with regular amounts of primers (30–150 nM). In the present study, we used two identified PCR fragments of the promoter region in

Generation of High Density Protein Microarrays by Cell-free in Situ Expression of Unpurified PCR Products

Due to the success of DNA microarrays and the growing numbers of available protein expression clones, protein microarrays have become more and more popular for the high throughput screening of protein interactions. However, the widespread applicability of protein microarrays is currently hampered by the large effort associated with their production. Apart from the requirement for a protein expression library, expression and purification of the proteins themselves and the lacking stability of many proteins remain the bottleneck. Here we present an approach that allows the generation of high density protein microarrays from unbound DNA template molecules on the chip. It is based on the multiple spotting technique and comprises the deposition of a DNA template in a first spotting step and the transfer of a cell-free transcription and translation mixture on top of the same spot in a second spotting step. Using wild-type green fluorescent protein as a model protein, we demonstrated the time and template dependence of this coupled transcription and translation and showed that enough protein was produced to yield signals that were comparable to 300 microg/ml spotted protein. Plasmids as well as unpurified PCR products can be used as templates, and as little as 35 fg of PCR product ( approximately 22,500 molecules) were sufficient for the detectable expression of full-length wild-type green fluorescent protein in subnanoliter volumes. We showed that both aminopropyltrimethoxysilane and nickel chelate surfaces can be used for capture of the newly synthesized proteins. Surprisingly we observed that nickel chelate-coated slides were binding the newly synthesized proteins in an unspecific manner. Finally we adapted the system to the high throughput expression of libraries by designing a single primer pair for the introduction of the required T7 promoter and demonstrated the in situ expression using 384 randomly chosen clones.

Analysis of Sources of Error in Quantitation of Purified DNA Fragments and Unpurified PCR Products by DNA Microchip Electrophoresis

We have investigated the accuracy and reproducibility of DNA quantitation on the DNA Lab-Chip and the relationship of these to the size and concentration of the DNA fragments. We found that quantitation of small DNA fragments, i.e. less than 200 bp, suffers from high relative error which can be improved by using an internal standard of similar size to the sample. The effects of trace chloride ion on quantitation error and sensitivity of the DNA Lab-Chip were also studied, and it was revealed that 0.2 mM chloride ion reduces quantitation sensitivity by 30% and increases the relative error. We also studied the effects of purification on quantitation errors in analysis of PCR products from cloning vector pUC118 and showed that use of an unpurified sample reduces chip sensitivity by 25%.

Microsphere Bead Arrays and Sequence Validation of 5/7/9T Genotypes for Multiplex Screening of Cystic Fibrosis Polymorphisms

The development of simple and rapid methods for the detection of the common genetic mutations associated with cystic fibrosis (CF) requires access to positive-control samples including the 5/7/9T variants of intron 8. We used PCR and a simple multiplex bead-array assay to identify 5/7/9T control samples from 29 commercially available DNA samples. Unpurified PCR products were directly hybridized to color-coded beads containing allele-specific capture probes for 5/7/9T detection. The performance of the assay was investigated using reverse-complement oligonucleotides, individual PCR products, and multiplex PCR products for 5/7/9T detection within a complex CFTR screening assay. Samples were genotyped by grouping the relative signal intensities from each capture probe. Of 29 commercially available DNA samples analyzed, 2 5T/7T, 2 5T/9T, 9 7T/9T, 11 7T/7T, and 5 9T/9T genotypes were identified. The genotype within each sample group was confirmed by DNA sequencing. The assay was compatible with the analysis of 10 to 1000 ng of genomic DNA isolated from whole blood and allowed for the separate identification of primary CFTR mutations from reflex variants. The correct identification of positive controls demonstrated the utility of a simple bead-array assay and provided accessible samples for assay optimization and for routine quality control in the clinical laboratory.

Enzymatically Amplified Surface Plasmon Resonance Imaging Method Using RNase H and RNA Microarrays for the Ultrasensitive Detection of Nucleic Acids

A novel surface enzymatic amplification method that utilizes RNA microarrays in conjunction with the enzyme RNase H is developed for the ultrasensitve detection and analysis of target DNA molecules. The enzyme RNase H is shown to selectively and repeatedly destroy RNA from RNA-DNA heteroduplexes on gold surfaces; when used in conjunction with the label-free technique of surface plasmon resonance imaging, multiple DNA targets can be detected at a concentration of 10 fM on a single chip. In addition, this method is utilized for the sequence-specific detection of the TSPY gene in both purified and unpurified PCR products. Finally, in a series of kinetics measurements, the initial rate of hydrolysis is shown to depend directly on the surface concentration of DNA-RNA heteroduplexes.

High capacity and low cost detection of prion protein gene variant alleles by denaturing HPLC

Mutations in the human prion protein gene ( PRNP) are responsible for hereditary diseases called transmissible spongiform encephalopathies (TSE) and a polymorphic site at codon 129 determines sensitivity to infectious forms of these maladies. More recently, codon 129 has been related to cognition performance in the elderly, in Alzheimer disease (AD) and in Down syndrome. Furthermore, a rare polymorphism at codon 171 was described in 23% of patients with mesial temporal lobe epilepsy related to hippocampal sclerosis (MTLE-HS), the most common form of surgically remediable epileptic syndrome. Thus, a method that permits fast and efficient screening of PRNP mutations and polymorphisms in patients, in high risk populations, and in family members is desirable. In the present study, we established the conditions for analysis of the PRNP open reading frame using denaturing high-performance liquid chromatography (DHPLC), whereby unpurified PCR products were subjected to denaturing and reannealing steps leading to heteroduplex formation. We described specific profiles for the PRNP polymorphisms at codons 129 (M/V), 117 (A/A silent), 219 (E/K), 171 (N/S), and the octarepeat deletion using amplified DNA from 562 samples. The chromatograms for TSE-associated mutations at codons 102 (P/L), 183 (T/A), and 210 (V/I) were also determined. Specificity of the DHPLC profile for each PRNP variant allele was confirmed in 100% of the samples by direct and cloned DNA sequencing in addition to endonuclease digestion when applicable. Therefore, the present study shows that DHPLC is a rapid, highly accurate and efficient technique for the detection of PRNP genetic variants.

Optimum sample medium for single-nucleotide polymorphism and mutation detection by capillary electrophoresis.

Capillary electrophoresis (CE) is a versatile analytical platform widely used for nucleic acids analysis. Its applications in research and diagnostics include scanning and screening for mutations and polymorphisms by such reliable methods as single-strand conformation polymorphism (SSCP), heteroduplex analysis (HA), and combined SSCP/HA. This study, aimed at the further development of these methods, is focused on detailed sample-media characteristics. Factors affecting single-strand conformer stability and DNA intake efficiency were analyzed. The sample media optimal for efficient mutation or SNP detection were determined, and complex SSCP-CE patterns arising from unpurified PCR products were explained. It turns out, that the nondenaturing aqueous media assure both efficient DNA intake, and single-strand conformers stability required for the SSCP and combined SSCP/HA. The results of this study are applicable to all these areas of biomedical research, in which capillary electrophoresis is used for the characterization of nucleic acids.

Modeling breast cancer in the rat: a method to produce knockout rats

The rat is an important murine model for biomedical research. It is a key model for many diseases including cardiovascular diseases, diabetes, neurological diseases, and certain cancers such as breast cancer. Through much work the rat genomic toolbox is almost full and includes dense genetic maps, an approximately sevenfold genomic sequence and transgenic technologies. A key missing tool was the ability to produce knockout rats. This was in part due to the fact that despite over a decade of work embryonic stem cells could not be made to go germline. In order to approach this problem we developed a unique technology that combined the use of germline mutagenesis with a yeast truncation gap repair assay to select gene-specific knockout rats. We first developed the protocols to efficiently mutagenize the rat genome with ethyl nitroso urea. In order to establish knockout rats for specifically chosen genes, we bred ethyl nitroso urea mutagenized males with untreated females to produce F1 pups. These pre-weanling pups were screened for functional mutations (e.g. nonsense mutations, out of frame-shifts mutations, etc.). This was accomplished using a highly efficient and economical yeast gap-repair truncation assay. For this assay either genomic DNA or cDNA is produced from tail clips of rat pups. This DNA is then used as a PCR template to amplify the targeted gene sequence. This unpurified PCR product together with our reporter vector is cotransformed into yeast that does not express ADE2. The yeast through homologous recombination clones the PCR product into the non-integrated ADE2 reporter plasmid. In scoring the yeast plates, a negative plate has mostly white large colonies and a plate positive for a knockout allele has one-half red colonies (rat) and one-half white colonies. We have used this technology to knockout two breast cancer suppressor genes, Brca1 and Brca2. The technology described can be applied to most rapidly breeding species ranging from zebra fish to mice.