Two-way Transfer Research Articles

Influence of Communicative Culture on Culture Management and Creative Industries: Ukrainian and World Experience

"The relevance of the problem is caused by the lack of thorough research on communicative culture in the context of the management of culture and art, cultural and creative industries. The purpose of the research is to determine the components of communicative culture that are relevant for the management of culture and art, their systematization with the aim of applying them to the development of creative industries of Ukraine. The research uses theoretical (analysis, synthesis, generalization) and empirical (case studies) methods of scientific research. The theoretical concept of communicative culture formed as a result of the research focuses on three main areas: internal communication related to corporate culture within an organization or institution; public communication that concerns the relations of the organization or project management with state administration bodies and communications with partner institutions; as well as intercultural communication, which reflects the connection with the world cultural context and ensures two-way cultural transfer. Cultural communication in the modern world should be considered through the prism of the formation of the information society and digitalization. New technologies also change approaches to the development of the cultural sphere in general and to communication formats in particular. In all three directions of communication functioning: internal, inter-institutional and cross-cultural, the impact of digital technologies was revealed, which intensified after pandemic and became one of the factors determining the format of communicative culture in the 21st century. The article uses Ukrainian, European, and American cases that demonstrate the importance of digitization for communicative culture."

Fungi in ant-plant interactions: a key to enhancing plant nutrient-acquisition strategies.

This article is a Commentary on Gegenbauer et al. (2023), 238: 2210–2223.

Study on Double Pressure Funnels and Gas-Liquid Two-Way Mass Transfer after Fracturing in Shale Gas Reservoirs

Well shut-in and drainage after shale gas fracturing are important factors affecting the productivity. Due to the imperfect optimization method of shale gas flowback, there has been no clear explanation for the problems such as “formulation of reasonable well shut-in time” and “less fracturing fluid flowback but high-gas production phenomenon” during shale gas drainage. In this paper, the double pressure funnels (one funnel is formed during fracturing by pressure difference from wellbore to formation, and two funnels are formed during flowback by pressure difference from fracture to formation and from fracture to wellbore) and gas-liquid two-way mass transfer (gas transfer by diffusion and liquid transfer by pressure difference) in shale gas drainage are investigated by calculating the pressure distribution after fracturing shale gas wells. The discrete numerical simulation by using unstructured PEBI grid is conducted, and the result is as follows: when shale gas well is shut-in for 20 days and produce for 1 year, the daily gas production corresponding to fracturing fluid flowback rates of 20%, 10%, and 5% are 47700 m3, 5800 m3, and 72700 m3, respectively. The investigation of double pressure funnels and gas-liquid two-way mass transfer explains clearly the phenomenon “less fracturing fluid flowback but high-gas production.” Meanwhile, the two conditions for optimizing the well shut-in time after fracturing are presented. That is, as for the studied case, the moving speed of the pressure boundary line should be less than 0.1 m/d, and the water-gas ratio near the fracture should be less than 1 / d with time. Consequently, the reasonable well shut-in time is optimized to be 20-25 days. The findings in this work are of benefit to enrich the flowback theory of shale gas after fracturing and provide a theoretical basis for the optimization technology of shale gas drainage after fracturing.

Evolution of rare earth element and εNd compositions of Gulf of Mexico seawater during interaction with Mississippi River sediment

A closed-system batch reaction experiment was conducted for 270 days to evaluate the effects of interaction between Gulf of Mexico (GOM) seawater and Mississippi River sediments on the system’s dissolved rare earth elements (REE) concentrations and neodymium isotopic compositions (εNd). This study specifically focuses on geochemical reactions involving silicic sediments derived from weathering of the North American continent as they affect the REEs and εNd of seawater along continental margins, in contrast to previous studies that investigated the influence of basaltic rocks and sediments on REEs and εNd in the ocean. Our results show that the dissolution of labile phases of lithogenic Mississippi River sediments leads to an approximately 100-fold increase in dissolved REE concentrations within the first 33 days of the experiment. Secondary mineral precipitation appears to lower the REE concentrations between days 33 and 270 of the experiment, although seawater REE concentrations remain elevated compared to initial values. The two-way elemental transfer involving dissolution and precipitation results in a net increase by a factor of 24 ± 12 (mean ± 1σ) in the dissolved REE concentrations by the end of the experiment (i.e., day 270). The dissolved REE concentration maxima observed after 33 days of the experiment represent the mobilization of approximately 0.37 % of the REE content of the operationally defined “exchangeable” fraction of the riverine sediments. The εNd values of the reactive lithogenic components were −9.77 and −9.95, which are similar to the GOM value of −9.81 ± 0.36. Because of the similarity between εNd values, changes in the seawater Nd isotope value throughout the experiment were subtle (mean ± std, reacted seawater εNd of −9.87 ± 0.17). The highest REE concentrations coincided with the most radiogenic εNd (-9.65 ± 0.23; day 33), which suggests that REE concentrations and εNd compositions of the GOM may be buffered by fluxes from sediments in the system. Our results are comparable to previous studies involving basaltic rocks and/or sediments of basaltic composition in that they demonstrate that silicic, river sediments are highly reactive in marine environments with regard to REE mobilization. The experimental results further suggest that “boundary exchange” plays an important role in influencing the εNd of seawater along continental margins dominated by large river systems, although the impacts of boundary exchange will be most profound where ambient seawater and river sediments have distinct Nd isotopic compositions (e.g., basaltic, or Precambrian shield material). Finally, our results indicate that the εNd value of GOM seawater is largely controlled by the lithogenic sediment delivered to the basin by the Mississippi River.

Improving Deep Mutual Learning via Knowledge Distillation

Knowledge transfer has become very popular in recent years, and it is either based on a one-way transfer method used with knowledge distillation or based on a two-way knowledge transfer implemented by deep mutual learning, while both of them adopt a teacher–student paradigm. A one-way based method is more simple and compact because it only involves an untrained low-capacity student and a high-capacity teacher network in the knowledge transfer process. In contrast, a two-way based method requires more training costs because it involves two or more low-cost network capacities from scratch simultaneously to obtain better accuracy results for each network. In this paper, we propose two new approaches, namely full deep distillation mutual learning (FDDML) and half deep distillation mutual learning (HDDML), and improve convolutional neural network performance. These approaches work with three losses by using variations of existing network architectures, and the experiments have been conducted on three public benchmark datasets. We test our method on some existing KT task methods, showing its performance over related methods.

Managing Knowledge Transfer in Chinese MNEs: The Reciprocity Between ACAP and DCAP

This study examines reciprocity between absorptive capacity (ACAP) and disseminative capacity (DCAP). Drawing on the social exchange theory (SET), reciprocity is conceptualised as bi-lateral enactment of connectivity between ACAP and DCAP. Reciprocity builds on what connects ACAP and DCAP in terms of relevance, compatibility and transparency in the abilities, willingness and opportunities for the parent and subsidiary firms to collaborate in two-way knowledge transfer. In addition, key stakeholders from parent and subsidiary firms enact reciprocity by necessitating, bridging, and consolidating ACAP and DCAP. Our conceptual framework of reciprocity therefore signifies a process of bi-lateral enactment of ACAP and DCAP, in which material exchanges, organisational commitments, and stakeholder consents are created at both ends of reverse knowledge transfer.

Bringing science communication skills into the university classroom and back out again: What do palaeoscience educators think?

University-level pedagogy and public science communication both have the same broad goal: to facilitate the sharing of knowledge and understanding from a specialist or expert, to a non-specialist group. Recent research has emphasised the need for there to be a two-way transfer or dialogue of ideas between these fields, but collaboration thus far is rare, particularly at the tertiary education level. Performing science outreach is mostly a voluntary service for academics, and institutions provide little in the way of support, training or recognition. Here I explore the potential for a positive feedback loop between science communication and higher-education pedagogy in the palaeosciences. A synthesis of best practises in science outreach is drawn from the literature and related to pedagogical concepts and findings. The resulting congruences suggest enormous potential for ‘cross-pollination' of ideas between the fields. However, in-depth one-on-one interviews and focus groups with palaeoscience educators, as well as an online survey, indicate that this potential remains largely untapped in the palaeosciences community. While respondents could identify certain skills as being integral to success in science communication, they did not appear to realise that the same skills, when applied in the classroom, could contribute towards key challenges in higher education today, including the stimulation of student engagement and motivation, the accommodation of an increasingly diverse student body, the anticipation of common student misconceptions in science, and the improvement of pedagogical models of delivery. Another emergent theme was that being a good science communicator was “much simpler” than being a good teacher, conflicting with evidence-based pedagogical and outreach research. While many palaeoscientists did express strong commitments to science communication, they had previous experience of time constraints and conflicts with other academic responsibilities. Therefore, both palaeoscientists and their institutions would benefit from viewing science communication as a valuable and formally rewardable activity within the scholarship of sharing knowledge, which also contributes to other aspects of a successful academic career.

Improving BDS broadcast ephemeris accuracy using ground-satellite-link observations

The BeiDou Navigation Satellite System (BDS) employs a hybrid constellation including GEO (Geosynchronous Earth Orbit), IGSO (Inclined Geosynchronous Orbit), and MEO (Medium Earth Orbit) satellites, where the GEO and IGSO satellites are critical to providing continuous and reliable Positioning, Navigation, and Timing (PNT) services in the Asia–Pacific region. To handle the inconsistency between the satellite orbits and clocks in the broadcast ephemeris, which are determined by the Orbit Determination and Time Synchronization (ODTS) and the Two-way Satellite Time Frequency Transfer (TWSTFT) technique, respectively, we present the strategies using ground-satellite-link observations to improve the accuracy of broadcast ephemeris. The clock differences between the ODTS and TWSTFT techniques are used for correcting the radial orbit component to derive the refined orbits, which are used to generate the refined broadcast ephemeris. The test results show the precision of the refined orbits is improved by 50–60% in the 3-h to 12-h predicted arcs for the GEO satellites, and by 40–50% for the IGSO satellites. Moreover, the validation using satellite laser ranging observations shows the mean precision of the refined broadcast ephemeris is improved by 27% compared to the original one. Applying the proposed strategies in the BDS Operational Control Segment (OCS), the time evolution of BDS Single Point Positioning (SPP) in the period from Jan. 2016 to April 2021 is evaluated. The SPP accuracy is improved from 1.94, 2.06 and 3.29 m to 1.39, 1.85, and 2.39 m in the north, east, and up components, respectively. Further update with the inclusion of BDS-3 satellites improve the corresponding SPP precision to 0.68, 0.70 and 1.91 m.

A Vision on a UNESCO Global Geopark at the Southeastern Dead Sea in Jordan—How Natural Hazards May Offer Geotourism Opportunities

This paper aims to identify and discuss the chances, solutions, and possible drawbacks related to the establishment of safe geotourism sites in subsidence-affected areas, exemplarily applied to the Ghor Al-Haditha sinkhole site at the southeastern shore of the Dead Sea. Such safe areas shall be established in the territory of the proposed future UNESCO Global Geopark (UGGp) in Jordan. The highlights of the geopark and the basis of its creation are the subsidence features and stream channels found along the SE shoreline of the Dead Sea, which form both a natural hazard and geological heritage of high international significance and have attracted many researchers so far. This recent and ongoing formation is related to the sharp regression of the lake, the specific geomechanical conditions, and the hydrogeologic and climatic background of the surroundings. Nearby communities have suffered in economic terms from these natural phenomena, including flash floods and droughts in this semi-arid to arid region. We here present a concept on how to integrate geoscientific research for hazard monitoring and early warning to maintain safety for inhabitants and visitors on the one hand and reach sustainable economic development through the establishment of geotourism sites on the other hand. This highlight area of the proposed UGGp serves as a starting example for delineating safe zones for walkways and infrastructure. This involves two-way knowledge transfer between spatial planning and hydrogeophysical monitoring, a network of community-supported geophysical surveillance, and regular maintenance and adaptation. The cross-cutting benefits for the territory involve the delineation of safe areas for agriculture and geotourism, the increase of sustainable tourism in the region with a shift towards alternative ways of income, more investment in infrastructure, a growth of international visibility of the region, enhanced environmental education with focus on responsible water usage, and involvement in international research and education projects.

Effective Teaching for Millennial Learner

Abstract : Learning is a holistic process that involves several key components based on two-way interaction and transfer of knowledge between the learner and surroundings. Given the developments in technology and pandemic situation, finding the right mix of traditional and new learning styles is paramount. Traditional teaching and learning process have failed to create the necessary connect among the millennial learners. Therefore, a judicial use of traditional teaching techniques with the relevant technology will make for an effective tool in converting the millennial student into an active learner. Active learning approach is the first step in making learning an organic process. This approach will not only foster exchange of ideas among peers through discussions, case studies and role plays, but also cater to individual learning styles. The outcome of employing such an approach will promote higher order thinking skills, engaging in deep learning, and facilitate better transfer of knowledge. As there is no standard protocol to follow in technical higher education teaching, this concept paper is the first step in incorporating learner centric teaching that can bring better congruity and consistency in specific higher education fields. Keywords : Active learning; Blended learning; Experiential learning; Information communication technology; Millennial learner

A two-way photonic quantum entanglement transfer interface

A quantum interface for two-way entanglement transfer, e.g., between orbital angular momentum degree of freedom in free space and time-energy degree of freedom in optical fibers, provides a way toward establishing entanglement between remote heterogeneous quantum nodes. Here, we experimentally demonstrate this kind of transfer interface by using two interferometric cyclic gates. By using this quantum interface, we perform two-way entanglement transfer for the two degrees of freedom. The results show that the quantum entangled state can be switched back and forth between orbital angular momentum and time-energy degrees of freedom, and the fidelity of the state before and after switching is higher than 90%. Our work demonstrates the feasibility and high performance of our proposed transfer interface, and paves a route toward building a large-scale quantum communication network.

1H NMR with Partial Transition Selectivity.

1H NMR has unique strengths, owing, for one, to 1H being the most sensitive NMR nucleus. However, the limited frequency range of 1H chemical shifts implies spectral crowding, leading to difficulties in assignment and interpretation of the spectra. Homonuclear broadband decoupling has been developed as a means of simplifying 1H NMR spectra but clearly leads to the inevitable and complete loss of precious information on homonuclear scalar couplings in solution state. A novel experiment is introduced in this work, which leads to partial 1H multiplet selectivity, thereby reducing spectral crowding, while at the same time permitting couplings to be inferred. The present one-dimensional (1D) experiment relies on two-way coherence transfer starting from 1H to coupled 13C carbons at natural abundance and ending finally with 1H detection. The experiment may be termed CArbon Single transition EDited (CASED) 1H NMR. The unusual spectral patterns that result are summarized, demonstrated, and rationalized for various molecular fragments. Artifacts in the present version of the CASED experiment are also described, and an application to the 1H NMR of a disaccharide is demonstrated as a first practical example.

A Novel Multi-Scale Method for Thermo-Mechanical Simulation of Power Integrated Circuits

During development of power Integrated Circuits (IC), several iterations between the design and test/ measurement steps are performed. Computer-aided engineering significantly shortens the product development process because the numerical simulations can identify and remediate most deficiencies during the design stage. The recent IC manufacturing technologies lead to ca. <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10^{4}$ </tex-math></inline-formula> -order scale separation between transistor cell details and the device active area, resulting in very complex IC models. For the IC complexity to be overcome, advanced multi-scale analysis methods are required to perform accurate simulations in a decent time (order of hours). This paper proposes an advanced and enhanced multi-scale simulation method for the thermo-mechanical analysis of power ICs. The computational IC structure is automatically generated from a Cadence layout and partitioned into far-field and homogenized regions - the macro-model. Detailed localized micro-scale sub-models are assigned to limited portions of the homogenized region. The two-way simulated data transfer between the homogenized macro-model and the micro sub-models is one multi-scale approach novelty proposed in this paper. The method is validated on a real test chip structure presented in literature. The proposed multi-scale approach in conjunction with the two-way macro-micro data transfer lead to similar accuracy in the prediction of defect location, yet with significant simulation time - and computational resource reduction (CPU time and RAM usage reduced by almost 80% and 60% respectively) compared to the method used as reference.

Introducing Security Configuration for gRPC in Microservices with Application Load Balancer

The primary goals of this paper is to contribute a useful method and present the advantages of Google Remote Procedure Calls (gRPC) for real-time two-way data transfer as well as to improve the security of microservices that use gRPC. The communication between two or more services is one of the key difficulties in splitting a monolithic application into microservices. When it utilizes gRPC to transmit in real-time, it responds quickly and with greater security. The gRPC protocol is now supported by application load balancing.

Numerical simulation to estimate the droplet size in aerosol solvent extraction system

The aerosol solvent extraction system (ASES) is one of the emerging processes for the production of fine particles of pharmaceutical compounds. This process involves atomization of the solution (pharmaceutical compound + organic solvent) in an antisolvent environment. The atomized droplet comes in contact with the antisolvent, the latter diffuses into the droplet and the solvent evaporates from the droplet surface. This work presents a mathematical model to calculate the dynamic size of a droplet moving in a precipitator used in the supercritical antisolvent process. The system considered for this work is carbon dioxide (CO2)-dimethyl sulfoxide (DMSO). Two Film Theory of mass transfer is used to estimate the mass transfer to and from the droplet. This two-way mass transfer process results in extremely high, very rapid and uniform supersaturation, which leads to the formation of very small size particles with narrow size distribution. The simultaneous diffusion of CO2 and the evaporation of solvent from the droplet cause swelling of the droplet which may be followed by shrinking. The effects of process parameters such as nozzle diameter, flow rate on droplet size are also studied in this work.

Software Architecture of an Automated Greenhouse Complex based on Cloud Technologies

To grow crops in greenhouse complexes, it is necessary to maintain the microclimatic conditions required for these crops and monitor them. Automation of these processes is an urgent task, and for its solution it is necessary to use both hardware and software. The paper proposes a cloud service architecture for managing robotic vertical farms, which allows for reliable two-way data transfer between the greenhouse modules and the operator and can be used for growing crops both in vertical hydroponic installations and in single-level greenhouses of greenhouses. The business processes are described that allow you to understand and evaluate the principles of organizing monitoring and management of cultivation. On the basis of the developed architecture, software has been implemented, which has been tested in the tasks of managing the greenhouse complex and obtaining data on the microclimate. Thanks to the use of wireless networks, the absence of restrictions on the type and location of modules, duplication of functionality and data replication, such a system can be considered flexible in use and scalable.

Theoretical Investigation of the Excited-State Dynamics Mechanism of the Asymmetric Two-Way Proton Transfer Molecule BTHMB.

An asymmetric two-way proton transfer molecule 3-(benzo[d]-thiazol-2-yl)-2-hydroxy-5-methoxybenzaldehyde (BTHMB) with the function of white-light emission was synthesized in a recent experiment (Bhattacharyya, A.; Mandal, S. K.; Guchhait, N. J. Phys. Chem. A 2019, 123, 10246). The particularity of this molecule is that there are two possible forms, one of which contained a six-membered H-bonded network toward a N atom (BTHMB-NH) present in the molecule as a proton acceptor and the other was toward an O atom (BTHMB-OH). Unfortunately, the experimental work lacked the theoretical explanation about the determination of the BTHMB-NH form and its excited-state intramolecular proton transfer (ESIPT) process under different solvents. Therefore, this study has explored these two points by means of the time-dependent density functional theory (TDDFT) method. The calculated relative energy and potential energy profile (PEP) of the transformation between BTHMB-NH and BTHMB-OH forms illustrated that BTHMB-NH was more stable, and the transfer from BTHMB-NH to BTHMB-OH was almost impossible at both S0 and S1 states under all solvents due to high potential energy barriers (PEBs) (11.67-21.59 kcal/mol). These calculated results provided the theoretical explanation and verification for the conclusion that the BTHMB molecule exists in the BTHMB-NH form in the experiment. Subsequently, the constructed PEPs of the ESIPT process for BTHMB-NH have proved that it was prone to the ESIPT process due to low PEBs (0.11-0.28 kcal/mol) at the S1 state. In particular, as the solvent polarity increased, the intensity of the intramolecular hydrogen bond (IHB) (O3-H4···N5) increased and the ESIPT process was more likely to occur. In addition, the twisted intramolecular charge-transfer (TICT) process was studied to explore the possible fluorescence quenching pathway of BTHMB-NH. Based on the PEPs of BTHMB-NH-T as a function of the N5-C6-C7-C8 dihedral angle at the S0 and S1 states, it is seen that the S0 state TICT process was inhibited due to the large PEBs (16.45-23.93 kcal/mol). Although the S1 state PEBs have been greatly reduced, they were still maintained at about 3.60 kcal/mol (3.60-3.84 kcal/mol), and hence, this process was still relatively difficult to occur. Due to the fact that BTHMB can be regarded as a standard in future designs involving red light and solvent-specific white-light emitters, a certain amount of investigative work on the ESIPT process was done in detail, and it paved the way for future research on the directionality of ESIPT in double ESIPT probes.

Superhigh sensing response and selectivity for hydrogen gas using PdPt@ZnO core-shell nanoparticles: Unique effect of alloyed ingredient from experimental and theoretical investigations

Alloy@semiconductor core-shell nanoparticles (CSNPs) offer great advantages for hydrogen sensing due to their unique properties compared to the individual components. Herein the synthesis of alloyed PdPt@ZnO CSNPs via a hydrothermal approach is reported. PdPt@ZnO sensor exhibits an impressive sensing response of 48 with respect to Pd@ZnO (22), Pt@ZnO (14), and free ZnO (9), along with the fast response and recovery times (0.7 and 3.0 min) to 100 ppm hydrogen at 350 °C, thus outperforming current achievements of advanced single-metal hybridized semiconductors. It further delivers high selectivity and long-term stability for hydrogen sensing. These improvements are attributed to (1) high catalytic activity of alloyed PdPt core, (2) high content of oxygen vacancies and chemisorbed oxygen in ZnO shell, (3) facile two-way transfer of electrons between the core and shell, and (4) high surface area and porosity of CSNPs. In addition, DFT calculations show that alloyed PdPt core has an excellent intrinsic hydrogen adsorption capability, superior to free-standing Pd and ZnO shell. These investigations together provide mechanistic insights into the working of the system in terms of gas adsorption, reaction, and desorption.

Laboratory Demonstration of the Local Oscillator Concept for the Event Horizon Imager

Black hole imaging challenges the third-generation space VLBI, the Very Long Baseline Interferometry, to operate on a 500[Formula: see text]GHz band. The coherent integration time needed here is 450[Formula: see text]s though the available space oscillators cannot offer more than 10[Formula: see text]s. Self-calibration methods might solve this issue in an interferometer formed by three antenna/satellite systems, but the need for the third satellite increases the mission costs. A frequency transfer is of special interest to alleviate both performance and cost issues. A concept of two-way optical frequency transfer is examined to investigate its suitability to enable space-to-space interferometry, in particular, to image the “shadows” of black holes from space. The concept, promising on paper, has been demonstrated by tests. The laboratory test set-up is presented and the verification of the temporal stability using standard analysis tool as TimePod has been passed. The resulting Allan Deviation is dominated by the 1/[Formula: see text] phase noise trend since the frequency transfer timescale of interest is shorter than 0.2[Formula: see text]s. This trend continues into longer integration times, as proven by the longest tests spanning over a few hours. The Allan Deviation between derived 103.2[Formula: see text]GHz oscillators is [Formula: see text]/[Formula: see text] within 10[Formula: see text][Formula: see text][Formula: see text]s that degrades twice towards the longest delay of 0.2[Formula: see text]s. The worst case satisfies the requirement with a margin of 11 times. The obtained coherence in the range of 0.997[Formula: see text]0.9998 is beneficial for space VLBI at 557[Formula: see text]GHz. The result is of special interest to future science missions for black hole imaging from space.

Enhancing impact: a model for policy development research

The Australian Housing and Urban Research Institute (AHURI) has sought to increase its policy impact by transitioning from funding ‘policy relevant’ research to a ‘policy development’ research model. This model has been developed and implemented by AHURI over more than a decade in its role as an intermediary between the research and policy communities. The Policy Development Research Model (PDRM) integrates the traditionally separate processes of evidence building and policy development into one set of practices. The cornerstones of the PDRM are; AHURI’s reputation as a trusted advisor, strong engagement with policy officials in setting the annual research agenda, the development of specialized research vehicles that ensure engagement throughout the conduct of research, academic expertise, the quality and rigor of research outputs, and proactive dissemination of research findings through a variety of channels. This article describes how the PDRM enhances policy impact by improving two-way knowledge transfer between academic researchers and policymakers and practitioners. It offers an insight into how AHURI’s active role as an intermediary impacts on housing, homelessness and urban policy in Australia.