Fluorescence Turn-on Research Articles

Modularized supramolecular assemblies for hypoxia-activatable fluorescent visualization and image-guided theranostics.

Rationale: Molecular imaging of microenvironment by hypoxia-activatable fluorescence probes has emerged as an attractive approach to tumor diagnosis and image-guided treatment. Difficulties remain in its translational applications due to hypoxia heterogeneity in tumor microenvironments, making it challenging to image hypoxia as a reliable proxy of tumor distribution. Methods: We report a modularized theranostics platform to fluorescently visualize hypoxia via light-modulated signal compensation to overcome tumor heterogeneity, thereby serving as a diagnostic tool for image-guided surgical resection and photodynamic therapy. Specifically, the platform integrating dual modules of fluorescence indicator and photodynamic moderator using supramolecular host-guest self-assembly, which operates cooperatively as a cascaded "AND" logic gate. First, tumor enrichment and specific fluorescence turn-on in hypoxic regions were accessible via tumor receptors and cascaded microenvironment signals as simultaneous inputs of the "AND" gate. Second, image guidance by a lighted fluorescence module and light-mediated endogenous oxygen consumption of a photodynamic module as dual inputs of "AND" gate collaboratively enabled light-modulated signal compensation in situ, indicating homogeneity of enhanced hypoxia-related fluorescence signals throughout a tumor. Results: In in vitro and in vivo analyses, the biocompatible platform demonstrated several strengths including a capacity for dual tumor targeting to progressively facilitate specific fluorescence turn-on, selective signal compensation, imaging-time window extension conducive to precise normalized image-guided treatment, and the functionality of tumor glutathione depletion to improve photodynamic efficacy. Conclusion: The hypoxia-activatable, image-guided theranostic platform demonstrated excellent potential for overcoming hypoxia heterogeneity in tumors.

Selective fluorescence turn-on detection of combination cisplatin-etoposide chemotherapy based on N-CDs/GSH-CuNCs nanoprobe.

Cisplatin (CIS) and etoposide (ETP) combination therapy is highly effective for treating various cancers. However, the potential for pharmacokinetic interactions between these drugs necessitates selective sensing methods to quantitate both CIS and ETP levels in patient's plasma. This work develops a dual fluorescence probe strategy using glutathione-capped copper nanoclusters (GSH-CuNCs) and nitrogen-doped carbon dots (N-CDs) for the simultaneous analysis of CIS and ETP. The fluorescence signal of GSH-CuNCs at 615 nm increased linearly with CIS concentration while the N-CD emission at 480 nm remained unaffected. Conversely, the N-CD fluorescence was selectively enhanced by ETP with no interference with the CuNC fluorescence. Extensive materials characterization including UV-vis, fluorescence spectroscopy, XRD, and TEM confirmed the synthesis of the nanoprobes. The sensor showed high sensitivity with limits of detection of 6.95 ng mL-1 for CIS and 7.63 ng mL-1 for ETP along with excellent selectivity against potential interferences in rabbit plasma. Method feasibility was demonstrated with application to real rabbit plasma samples. The method was further applied to estimate the pharmacokinetic parameters of CIS before and after ETP coadministration. The dual nanoprobe sensing strategy enables rapid and selective quantitation of CIS and ETP levels to facilitate therapeutic drug monitoring and optimization of combination chemotherapy regimens.

Photosensitizer-singlet oxygen sensor conjugated silica nanoparticles for photodynamic therapy and bioimaging.

Intracellular singlet oxygen (1O2) generation and detection help optimize the outcome of photodynamic therapy (PDT). Theranostics programmed for on-demand phototriggered 1O2 release and bioimaging have great potential to transform PDT. We demonstrate an ultrasensitive fluorescence turn-on sensor-sensitizer-RGD peptide-silica nanoarchitecture and its 1O2 generation-releasing-storing-sensing properties at the single-particle level or in living cells. The sensor and sensitizer in the nanoarchitecture are an aminomethyl anthracene (AMA)-coumarin dyad and a porphyrin or CdSe/ZnS quantum dots (QDs), respectively. The AMA in the dyad quantitatively quenches the fluorescence of coumarin by intramolecular electron transfer, the porphyrin or QD moiety generates 1O2, and the RGD peptide facilitates intracellular delivery. The small size, below 200 nm, as verified by scanning electron microscopy and differential light scattering measurements, of the architecture within the 1O2 diffusion length enables fast and efficient intracellular fluorescence switching by the tandem ultraviolet (UV)-visible or visible-near-infrared (NIR) photo-triggering. While the red emission and 1O2 generation by the porphyrin are continually turned on, the blue emission of coumarin is uncaged into 230-fold intensity enhancement by on-demand photo-triggering. The 1O2 production and release by the nanoarchitecture enable spectro-temporally controlled cell imaging and apoptotic cell death; the latter is verified from cytotoxic data under dark and phototriggering conditions. Furthermore, the bioimaging potential of the TCPP-based nanoarchitecture is examined in vivo in B6 mice.

A Kumujian-C based highly selective fluorescence turn-on probe enables the detection of sulfite in real samples and living cells

Kumujian-C as a small molecular fluorescent probe as a turn-on sensor for sulfite ions.

Detection of Benzodiazepines Using Schiff Base as Optical Probe Based on Fluorescence Turn-On Effect for Forensic Investigation

Detection of Benzodiazepines Using Schiff Base as Optical Probe Based on Fluorescence Turn-On Effect for Forensic Investigation

A portable smartphone platform utilizing dual-sensing signals for visual determination of semicarbazide in food samples.

Semicarbazide (SEM) is a metabolite of antibiotic nitrofurazone and a food contaminant in food production, showing potential carcinogenic, mutagenic, teratogenic, and toxic effects on human health. It is urgent to develop a highly efficient and sensitive assay for visual detection of SEM. In this paper, a pyrrolopyrrole cyanine fluorescent probe (PPCy-1) was reported for visualization and quantitative analysis of SEM through a chromophore reaction sensing mechanism for the first time. The probe towards SEM exhibited a fast response (10 min), a low detection limit (0.18 μM), high selectivity, and distinct dual ratiometric fluorescence turn-on and colorimetric modes. Its practicability was further verified by detecting SEM in meat, water, and honey samples with satisfactory recovery values. More importantly, a smartphone-assisted portable testing platform was constructed based on a PPCy-1-immobilized test paper or a polyamide thin film with a color scanning APP for real-time and on-site detection of SEM. This work provides low-cost, convenient, and rapid assays for visual SEM detection, which have potential applications in food safety monitoring.

A versatile sensor capable of ratiometric fluorescence detection of trace water and turn-on detection of Cu2+ modulating the binding interaction of a Cu(II) complex with BSA and DNA complemented by docking studies.

A fluorescent molecule, pyridine-coupled bis-anthracene (PBA), has been developed for the selective fluorescence turn-on detection of Cu2+. Interestingly, the ligand PBA also exhibited a red-shifted ratiometric fluorescence response in the presence of water. Thus, a ratiometric water sensor has been utilized as a selective fluorescence turn-on sensor for Cu2+, achieving a 10-fold enhancement in the fluorescence and quantum yield at 446 nm, with a lower detection limit of 0.358 μM and a binding constant of 1.3 × 106 M-1. For practical applications, sensor PBA can be used to detect Cu2+ in various types of soils like clay soil, field soil and sand. The interaction of the PBA-Cu(II) complex with transport proteins like bovine serum albumin (BSA) and ct-DNA has been investigated through fluorescence titration experiments. Additionally, the structural optimization of PBA and the PBA-Cu(II) complex has been demonstrated by DFT, and the interaction of the PBA-Cu(II) complex with BSA and ct-DNA has been analyzed using theoretical docking studies.

Compact device prototype for turn-on fluorescence detection of sarin based on reactive 4,4-diaryloxy-BODIPY derivatives

4,4-Diaryloxy-BODIPYs were presented for fluorescence turn-on detection of sarin in solution media. A compact tubular sensor and a sensing platform prototype were fabricated for in situ detection of real agents and simulants at the sub-mM level.

Synthesis of a metal-organic framework Cu-Mi-UiO-66-based fluorescent nanoprobe for the simultaneous sensing and intracellular imaging of GSH and ATP.

This study reports a fluorescent nanoprobe operated in fluorescence turn-on mode for simultaneously sensing and imaging intracellular GSH and ATP. By using maleimide-derivatives as the ligand, the bimetallic nanoscale metal-organic framework (NMOF) Cu-Mi-UiO-66 has been synthesized for the first time using a straightforward one-step solvothermal approach, serving as a GSH recognition moiety. Subsequently, a Cy5-labeled ATP aptamer was assembled onto Cu-Mi-UiO-66 via strong coordination between phosphate and zirconium, π-π stacking and electrostatic adsorption to develop the dual-responsive fluorescence nanoprobe Cu-Mi-UiO-66/aptamer. Due to the photoinduced electron transfer (PET) effect between maleimide groups and the benzene ring of the ligand and the charge transfer between Cy5 and the Zr(IV)/Cu(II) bimetal center of the NMOF, the Cu-Mi-UiO-66/aptamer exhibits a fluorescence turn-off status. The Michael addition reaction between the thiol group of GSH and the maleimide on the NMOF skeleton results in turning on of the blue fluorescence of Cu-Mi-UiO-66. Meanwhile, upon specific interaction with ATP, the aptamer changes into internal loop structures and detaches from Cu-Mi-UiO-66, resulting in turning on of the red fluorescence of Cy5. The nanoprobe demonstrated an excellent sensing performance with a good linear range (GSH, 5.0-450.0 μM; ATP, 1.0-50.0 μM) and a low detection limit (GSH, 2.17 μM; ATP, 0.635 μM). More importantly, the Cu-Mi-UiO-66/aptamer exhibits good performance for tracing intracellular concentration variations of GSH and ATP in living HepG2 cells under different stimulations. This study highlights the potential of NMOFs for multiplexed analysis and provides a valuable tool for tumor microenvironment research and early cancer diagnosis.

Bromine atom introduction improves the F- sensing ability of an indolo[3,2-b]carbazole-salicylaldehyde-based fluorescence turn-on sensor.

The heavy-atom effect usually quenches fluorescence, but scarcely enhances it. Herein, fluorescence turn-on sensors without or with a bromine atom for F- detection are presented, achieving fast response time within 1 min, and the LODs of 1.9 × 10-7 and 8.5 × 10-8 M, reflecting that halogen atom introduction is beneficial for F- detection ability improvement. The sensing mechanism of -OH unit deprotonation is confirmed based on the results of a 1 : 2 stoichiometric ratio, 1H NMR titration and TD-DFT calculation. The water environment F- detection and spiked recovery experiments demonstrate their potential for real sample detection.

A highly sensitive fluorescence probe for on-site detection of nerve agent mimic diethylchlorophosphonate DCP.

Nerve agents are the most toxic chemical warfare agents that pose severe threat to human health and public security. In this work, we developed a novel fluorescent probe NZNN based on naphthylimide and o-phenylenediamine to detect nerve agent mimic diethylchlorophosphonate (DCP). DCP underwent a specific nucleophilic reaction with the o-phenylenediamine group of NZNN to produce a significant fluorescence turn-on response with high selectivity, exceptional linearity, bright fluorescence, rapid response (<6 s) and a low detection limit (30.1 nM). Furthermore, a portable sensing device was fabricated for real-time detection of DCP vapor with excellent performance. This portable and sensitive device is favorable for monitoring environmental pollution and defense against chemical warfare agents.

Tailored BODIPY-based fluorogenic probes for phosgene detection: a comparative evaluation of recognition sites.

We constructed two novel boron-dipyrromethene (BODIPY)-based fluorescent probes, BOPD and BOBA, each equipped with the phosgene specific recognition units o-phenylenediamine (OPD) and o-aminobenzylamine (OBA) at the 2-position of the BODIPY core. BOPD and BOBA represent rare examples of BODIPY-based probes that operate by modulating an intramolecular charge transfer process (ICT), as validated by computational studies. We systematically compared the analytic performance of those recognition units while focusing on selectivity, fluorescence turn-on ratios and response times. Probe BOBA, equipped with OBA as the recognition unit, demonstrated a remarkably low detection limit (i.e., 1.40 nM) and a rapid response time (<10 s) for triphosgene. By comparison, BOPD, featuring an OPD unit, showed superior selectivity towards triphosgene, with a detection limit of 93 nM and a response time of up to 30 s. A portable sensing platform was developed by loading BOPD onto test strips made of TLC plates, nonwoven materials and small-headed cotton swabs, which were assessed for their effectiveness in detecting phosgene. We additionally performed the first successful application of a fluorescent probe, namely BOPD, for monitoring the accumulation of phosgene in plants.

A thiol-triggered croconaine-chromene integration to induce ferroptosis and photothermal synergistic efficient tumor ablation.

Theranostic probes, combining diagnostic and treatment capabilities, have emerged as promising tools in tumor precision medicine. However, existing probes with constant fluorescence and photothermal activity can result in low signal-to-background ratios and phototoxicity. In this study, we introduced CM-Croc, a novel probe comprised of chromene and croconaine, selectively triggered by thiol. CM-Croc exhibited turn-on fluorescence and released croconaine for photothermal therapy. The croconaine moiety possesses high photothermal conversion efficiency up to 55%. Besides, it demonstrated potent activity against various cancer cell lines at low micromolar concentrations, including drug-resistant variants, through enhanced photothermal therapy combined with the ferroptosis effect. What's more, CM-Croc was proved to inhibit the activity of GPX4 to induce ferroptosis. Finally, CM-Croc was demonstrated to be the first croconaine-derived SOP, which targeted tumors and significantly inhibited tumor growth in vivo following intravenous administration with irradiation. This study showed CM-Croc's potential for enhancing tumor precision medicine.

Fluorescent discrimination of cysteine, homocysteine, and glutathione in urine samples using a novel seleno-BODIPY probe.

Biothiols, such as cysteine (Cys), glutathione (GSH), and homocysteine (Hcy), play crucial roles in various physiological processes and serve as biomarkers for oxidative stress and redox homeostasis. Their structural similarities, however, pose significant challenges in selective detection and quantification, limiting the availability of suitable probes. Here, we report the design and synthesis of a novel ratiometric fluorescent sensor based on a seleno-BODIPY (Se-BODIPY) derivative, enabling rapid discrimination and quantification of Cys, Hcy, and GSH with low detection limits (Cys = 0.8 μM, Hcy = 20.4 μM, and GSH = 35.9 μM) via fluorescence. The probe exhibits high selectivity towards these biothiols over 11 amino acids, operating through dual-mode detection (absorption and emission spectra) with a visible color change from blue to orange (Cys/Hcy) or pink (GSH) in a turn-on fluorescence process. Notably, the distinct reaction mechanisms between Se-BODIPY and GSH versus Cys/Hcy lead to a more prominent blue shift for Cys/Hcy, facilitating their differentiation. Kinetic studies further differentiate Cys from Hcy, with the BODIPY reacting much faster with Cys than the latter. The effectiveness of the sensor was demonstrated in quantifying biothiols in urine samples, providing a non-invasive method with high recovery rates. Additionally, its incorporation into paper strips allows detection of biothiols in water samples via visible and UV light-induced color changes, indicating its potential for solid-state detection without organic solvents.

Functionalized cyanostilbene-based nano-AIEgens: multipoint binding interactions for improved sensing of gallic acid in real-life food samples.

Cyano-substituted stilbene (CSS) derivatives have been synthesized that can form luminescent nanoscopic assemblies in an aqueous medium. The optical properties of such materials, as governed by the relative ratios of their monomer and aggregated forms, are found to be susceptible to pH and temperature of the medium. The compound with boronic acid attached at the terminal positions shows a turn-on fluorescence response (LOD: 15.4 ppb) with gallic acid (GA). The mechanistic studies indicate that the 1,2-diol unit of GA is involved in ester formation with the boronic acid residue, while the carboxylic end engages in hydrogen bonding interaction with the nitrile unit. Such multi-point binding interaction provides better selectivity over other structurally similar analytes. Moreover, the distinct aggregation properties of such boronate ester derivatives are responsible for the GA-specific optical response. The sensory system has been utilized for the determination of the levels of GA derivatives in tea (green tea and black tea) and various fruit (mango, orange, guava, pomegranate) extracts. In all cases, the estimated values of GAE were found to be in the same range reported by others. Finally, low-cost, chemically-modified paper strips have been designed for rapid, on-location detection of GA.

PH-dependent complex formation with TAR RNA and DNA: application towards logic gates.

Nucleic acid-based logic gates have shown great potential in biotechnology, medicine as well as diagnostics. Herein, we have constructed pH-responsive logic devices by utilizing HIV-1 TAR hairpins in combination with a thiazole peptide that exhibits turn-on fluorescence upon interacting with TAR RNA or DNA. Based on this, INHIBIT-AND and YES-INHIBIT-AND logic gates were constructed in parallel. The pH alteration leads to conformational changes of the hairpin structure, enabling the construction of a multi-reset reusable logic system which could be developed for in vitro sensing of the HIV-1 viral RNA.

Turn-on fluorescent aptasensing for the determination of serotonin via target-induced knot displacement at corona.

A turn-on fluorescence aptasensing approach for the highly sensitive and selective determination of 5-HT was proposed via target-induced knot displacement. 5-HT can be determined in a range from 0.5 nM to 100 nM with a limit of detection as low as 0.1 nM and a low dissociation constant of 2.3 nM.

Turn-on fluorescent nanoprobe for ATP detection based on DNA-templated silver nanoclusters.

A turn-on fluorescence nanoprobe was constructed for the determination of adenosine 5'-triphosphate (ATP) based on DNA-templated silver nanoclusters (DNA-AgNCs). The significant enhancement fluorescence intensity of DNA-AgNCs in the presence of ATP is due to the high special binding affinity between ATP and the aptamer, resulting in the environment of DNA-AgNCs with darkish fluorescence lying at one terminus of DNA slightly altering owing to the change of ATP aptamer conformation. A good linear range runs from 9 to 24 mM with a satisfactory detection limit of 3 μM. Furthermore, the proposed nanoprobe exhibited good performance for ATP detection in diluted fetal bovine serum.

Turn-on fluorescence detection of carbon monoxide in plant tissues based on Cu2+ modulated polydihydroxyphenylalanine nanosensors.

As an important signaling molecule, carbon monoxide (CO) plays an important role in plant growth and development including affecting stomatal movement, stress response and root development. Thus, it is necessary to develop fluorescent probes that can be used to detect CO in live plant tissues and further enable a deep-understanding of its biological function, mechanism and metabolism. In this paper, a novel and sensitive fluorescent probe based on Cu2+ modulated polydihydroxyphenylalanine nanoparticles (PDOAs) has been developed for the detection of CO. The fluorescence of PDOAs can be effectively quenched by Cu2+ through the multi-coordination interaction. In the presence of CO, Cu2+ can be effectively reduced to Cu+, which resulted in the release of free PDOAs and the Cu2+-quenched bright green fluorescence was restored obviously. Through this ingenious strategy, the abiotic CO can be accurately detected and identified with high selectivity, rapid response time within 5 min and an ultralow detection limit of 72.4 nM. Due to the admirable biocompatibility, the nano-material based probe has been successfully applied for in vivo imaging CO in the root tip and leave tissues of lettuce. To the best of our knowledge, this is the first example of a fluorescent probe-based methodology for the sensitive tracking of CO in plant tissues.

A pyrene–calix[4]triazolium conjugate for fluorescence recognition of hydrogen sulfate

A photoinduced electron transfer (PET) based pyrene–calix[4]triazolium conjugate was developed that exhibits selective turn-on fluorescence for HSO4−.