Tunable Emission Research Articles

Self-Trapped Exciton Emission in Highly Polar 0D Hybrid Ammonium/Hydronium-Based Perovskites Triggered by Antimony Doping.

Various monovalent cations are employed to construct metal halide perovskites with various structures and functionalities. However, perovskites based on highly polar A-site cations have seldom been reported. Here, a novel hybrid 0D (NH4)x(OH3)3-xInCl6 perovskite with highly polar hydronium OH3+ cations is introduced in this study. Upon doping with Sb3+, hybrid 0D (NH4)x(OH3)3-xInCl6 single crystals exhibited highly efficient broadband yellowish-green (550 nm) and red (630 nm) dual emissions with a PLQY of 86%. The dual emission arises due to Sb3+ occupying two sites within the crystal lattice that possess different polarization environments, leading to distinct Stokes shift energies. The study revealed that lattice polarity plays a significant role in the self-trapped exciton emission of Sb3+-doped perovskites, contributing up to 25% of the Stokes shift energy for hybrid 0D (NH4)x(OH3)3-xInCl6:Sb3+ as a secondary source, in addition to the Jahn-Teller deformation. These findings highlight the potential of Sb3+-doped perovskites for achieving tunable broadband emission and underscore the importance of lattice polarity in determining the emission properties of perovskite materials.

Tuning quantum dots emission on DNA tetrahedron/silica nanosphere/graphene oxide nanointerface for ratiometric fluorescence assay of Pb2+ in multiplex samples

BackgroundAssembling framework nucleic acid (FNA) nanoarchitectures and tuning luminescent quantum dots (QDs) for fluorescence assays represent a versatile strategy in analytical territory. Rationally, FNA constructs could offer a preferential orientation to efficiently recognize the target and improve detection sensitivity, meanwhile, regulating size-dependent multicolor emissions of QDs in one analytical setting for ratiometric fluorescence assay would greatly simplify operation procedures. Nonetheless, such FNA/QDs-based ratiometric fluorescence nanoprobes remain rarely explored. ResultsWe designed a sensitive and signal amplification-free fluorescence aptasensor for lead ions (Pb2+) that potentially cause extensive contamination to environment, cosmetic, food and pharmaceuticals. Red and green emission CdTe quantum dots (rQDs and gQDs) were facilely prepared. Moreover, silica nanosphere encapsulating rQDs served as quantitative internal reference and scaffold to anchor a predesigned FNA and DNA sandwich containing Pb2+ binding aptamer and gQD modified DNA signal reporter. On binding of Pb2+, the gQD-DNA signal reporter was set free, resulting in fluorescence quenching at graphene oxide (GO) interface. Owing to the rigid structure of FNA, the fluorescence signal reporter orderly arranged at the silica nanosphere could sensitively respond to Pb2+ stimulation. The dose-dependent fluorescence signal-off mode enabled ratiometric analysis of Pb2+ without cumbersome signal amplification. Linear relationship was established between fluorescence intensity ratio (I555/I720) and Pb2+ concentration from 10 nM to 2 μM, with detection limit of 1.7 nM (0.43 ppb), well addressing the need for Pb2+ routine monitoring. The designed nanoprobe was applied to detection of Pb2+ in soil, cosmetic, milk, drug, and serum samples, with the sensitivity comparable to conventional ICP-MS technique. SignificanceGiven the programmable design of FNA and efficient recognition of target, flexible tuning of QDs emission, and signal amplification-free strategy, the present fluorescence nanoprobe could be a technical criterion for other heavy metal ions detection in a straightforward manner.

Individual Tuning of Directional Emission and Luminance of a Quantum Emitter in a Composite Plasmonic Antenna

High directional emission and high radiative quantum efficiency are strongly needed when moving a single optical nano-emitter (such as a quantum dot) into the practical realm. However, a typical optical nano-emitter struggles to meet the requirements above, which limits its practical applications in next-generation nano-photonic devices such as single-photon sources. Here, to achieve these features simultaneously, we propose and theoretically investigate a composite plasmonic antenna consisting of a hemispherical solid immersion lens (SIL) and a bowtie plasmonic nano-antenna, wherein a high directional emission of 10° and 2.5 × 103 of Purcell factor have both been enabled. Moreover, we find that directionality and the Purcell factor can be manipulated independently in our antenna, which provides a novel platform for the optimization of single-photon sources.

Layer-controllable synthesis, lattice structural Determination, and fluorescence lifetime imaging of (HA)2(MA)n-1PbnI3n+1 Quasi-2D organic-inorganic perovskite microsheets

Hybrid quasi-two-dimensional (quasi-2D) perovskites have attracted great interest due to their excellent photovoltaic and light-emitting properties, which enable the rapid development of high-performance perovskite-based solar cells, light-emitting diodes, and lasers. Although many efforts have been made to improve the quality and stability of organic-inorganic perovskites, the controlled synthesis of high-quality layered perovskites remains challenging. Here, single-crystalline quasi-2D (HA)2(MA)n-1PbnI3n+1 perovskites with layer numbers of n from 1 to 3 have been synthesized in a controllable manner, exhibiting stable lattice structures and tunable optical emission. Structurally, hexylamine (HA) with longer alkyl chains was used as an organic spacer in Ruddlesden-Popper (RP) phase perovskites to improve the chemical stability of perovskites. Various ratios of precursor materials were adopted for separating pure and large-scale quasi-2D (HA)2(MA)n-1PbnI3n+1 perovskites, in which different layer-number perovskites with tunable band gaps were obtained with the modulated fluorescence lifetimes. Our lattice structural and fluorescence-lifetime characterizations of RP-phase perovskites provide critical information on the emerging quasi-2D perovskite-crystal systems and their fluorescence relaxation dynamics. The employed strategy to synthesize high-quality perovskites (HA)2(MA)n-1PbnI3n+1 is technically essential to develop the rising perovskite-based photovoltaic and light-emitting applications.

Synthesis of NaYbF4:Er nanocrystals with controllable size, morphology, and multicolor upconversion luminescence for Anticounterfeiting applications

The dopant concentration of lanthanide ions plays one of the critical roles to manipulate size/morphology, photon population pathway, or luminescence color/intensity in upconversion nanoparticles (UCNCs), which have a significant effect on their application developments. Herein, a strategy is demonstrated for simultaneous size, morphology and multicolor luminescence tuning in the single doped lanthanide activator Er3+ ion system through simply tuning the concentration of Er3+ ions. The doping of different Er3+ ion amounts in NaYbF4:Er nanocrystals can control nanoparticle size (from several hundreds to tens of nanometers) and morphology. Moreover, multicolor upconversion luminescence involving green, yellow, orange and red can be obtained in the NaYbF4:Er UCNCs by changing the excitation power density of 980 nm laser. Mechanistic studies reveal the size and morphology evolution process as well as saturation/cross relaxation effects induced tunable multicolor emissions. These nanocrystals have demonstrated promising potential applications in anticounterfeiting. Our results not only provide a simple and feasible route for simultaneous size/morphology control and multicolor upconversion luminescence tuning, but also can further expand the utility of UCNCs in the frontier applications ranging from optical encoding to information security.

Modification of Local Site Preference for Achieving Tunable Color Emission from Blue to Near-White in Sr3(PO4)2:Dy3+ Phosphor

The color tunability of Sr3(PO4)2:1%Dy3+ phosphor from blue to near white is studied at various annealing conditions. Higher temperature annealing promotes agglomerated rhombohedral (α) phase formation. Experimental and theoretical analysis reveal dopant preference at the low-symmetry Sr(II) site, altering electric (4F9/2→6H13/2) and magnetic (4F9/2→6H15/2) dipole transitions, thereby affecting the yellow-to-blue (Y/B) ratio. The luminescence intensity variation and color tunability are explained based on the local site symmetry and occupation probability of the dopant in the host lattice. An increase in the luminescence intensity up to an annealing temperature of 1200 °C, followed by quenching is observed due to the oxygen vacancies. Commission Internationale d'Eclairage (CIE) color coordinates of (0.31, 0.38), Correlated Color Temperature (CCT) of 6341 K, and color purity of 22.57% confirm the potential of Sr3(PO4)2:1%Dy3+ phosphor annealed at (1200 °C, 6 hrs) for white light generation. A probable photoluminescence mechanism involving 4f→5d→4f transitions in Sr3(PO4)2:1%Dy3+ is proposed.

Tunable circularly polarized luminescence behaviors caused by the structural symmetry of achiral pyrene-based emitters in chiral co-assembled systems

The regulation of circularly polarized luminescence (CPL) behavior is of great significance for practical applications. Herein, we deliberately designed three achiral pyrene derivatives (Py-1, Py-2, and Py-3) with different butoxy-phenyl substituents and the chiral binaphthyl-based inducer (R/S-B) with anchored dihedral angle to construct chiral co-assemblies, and explored their induced CPL behaviors. Interestingly, the resulting co-assemblies demonstrate tunable CPL emission behaviors caused by the structural symmetry effect of achiral pyrene-based emitters during the chiral co-assembly process. And in spin-coated films, the dissymmetry factor (gem) values were 9.1 × 10-3 for (R/S-B)1-(Py-1)10, 5.6 × 10-2 for (R/S-B)1-(Py-2)7, and 8.6 × 10-4 for (R/S-B)1-(Py-3)1, respectively. The strongest CPL emission (|gem| = 5.6 × 10-2, λem = 423 nm, QY = 34.8 %) was detected on (R/S-B)1-(Py-2)7 due to the formation of regular and ordered helical nanofibers through the strong π-π stacking interaction between the R/S-B and the achiral Py-2 emitter. The strategy presented here provides a creative approach for progressively regulating CPL emission behaviors in the chiral co-assembly process.

Pure Tunable Emissions from Cesium Manganese Bromide by Monitoring the Crystal Fields Through a Sustainable Approach

AbstractResearch on manganese (Mn) halide perovskite derivatives with tunable emissions and high color purity have gathered a significant amount of attention for display technology. Despite of mesmerizing optical properties, the synthesis of these all‐inorganic Mn halide compounds is followed by complex and toxic processes. Second, a precise control over the synthesis parameters is mandatory to achieve their pure emissions. Therefore, an ecologically sustainable water‐based solution approach is adapted here to tailor the phases and emissions of cesium manganese bromide (Cs‐Mn‐Br) perovskite derivatives. It is observed that a controlled injection of solution stabilizer plays a pivotal role in engineering the intrinsic properties of Mn halide perovskites. This solution stabilizer interacts with the Mn‐ions of those perovskite derivatives influencing their surrounding coordination environment and pure emission from then. A pure green emission with PLQY of 82% is achieved from as prepared Cs3MnBr5, whereas CsMnBr3 showed a red emission with PLQY of ≈20%. Encouraged by these properties phosphor‐driven light emitting diodes (LED) are designed that show a steady electroluminescence intensity. The CIE coordinates of the Cs3MnBr5 and CsMnBr3 LED prototypes are at (0.224, 0.659) and (0.688, 0.316). This study showcases simple, eco‐friendly tactics for developing green and red LED prototypes contributing toward sustainable device design.

Tunable Narrow-Band Cyan-Emission of Eu2+-doped Nitridomagnesophosphates Ba3-xSrx[Mg2P10N20] : Eu2+ (x=0-3).

Tetrahedron-based nitrides offer a wide range of properties and applications. Highly condensed nitridophosphates are examples of nitrides that exhibit fascinating luminescence properties when doped with Eu2+, making them appealing for industrial applications. Here, we present the first nitridomagnesophosphate solid solution series Ba3-xSrx[Mg2P10N20] : Eu2+ (x=0-3), synthesized by a high-pressure high-temperature approach using the multianvil technique (3 GPa, 1400 °C). Starting from the binary nitrides P3N5 and Mg3N2 and the respective alkaline earth azides, we incorporate Mg into the P/N framework to increase the degree of condensation κ to 0.6, the highest observed value for alkaline earth nitridophosphates. The crystal structure was elucidated by single-crystal X-ray diffraction, powder X-ray diffraction, energy-dispersive X-ray spectroscopy (EDX), and solid-state NMR. DFT calculations were performed on the title compounds and other related highly condensed nitridophosphates to investigate the influence of Mg in the P/N network. Eu2+-doped samples of the solid solution series show a tunable narrow-band emission from cyan to green (492-515 nm), which is attributed to the preferred doping of a single crystallographic site. Experimental confirmation of this assumption was provided by overdoping experiments and STEM-HAADF studies on the series as well on the stoichiometric compound Ba2Eu[Mg2P10N20] with additional atomic resolution energy-dispersive X-ray spectroscopy (EDX) mapping.

Versatile aggregation induced emissive molecular probes incorporating different donor/acceptor groups for tunable multiple color fluorescence

Excited state intramolecular proton transfer (ESIPT) and aggregation induced emission active multicolour fluorescent probes for bioimaging applications has grown popularly in recent years. Herein, we report a series of different donor/acceptor units (Cl, NO2 and O–CH3) bearing anthracene-salicylaldehyde based fluorescent probes and their antibacterial activity and fluorescence imaging of E. Coli bacteria and zebrafish embryos. All the compounds (ASA1, ASA2, ASA3 and ASA4) synthesized via facile one pot condensation reaction of anthracene hydrazide with Salicylaldehyde, 5-Chlorosalicylaldehyde, 5-Nitrosalicylaldehyde, 5-methoxysalicylaldehyde and characterized using all the possible spectroscopic techniques. The noteworthy tuneable emission wavelength shifts from 471 nm to 625 nm and ESIPT characteristics of the compounds were demonstrated through photophysical experiments and single crystal X-ray diffraction analysis. All the experimental results were completely analyzed theoretically on the ground as well as the excited state using density functional theory (DFT) and time dependent density functional theory (TD-DFT) calculations. Compounds ASA1-ASA4 showed fascinating different colour fluorescent (Green, Yellow and Orange) aggregation induced emission features in the THF-H2O mixture. AIE characteristics of ASA1, ASA2, ASA3 and ASA4 were recognized using absorption, emission, fluorescence quantum yield (Φ), DLS and SEM analysis. ASA1, ASA2, ASA3 and ASA4 showed excellent antibacterial activity and ROS generation against E. Coli bacteria. Further, owing to their multicolour fluorescent property all the compounds successfully applied for fluorescent imaging in E. Coli bacteria and live zebrafish embryos.

Color tunability and temperature sensing capabilities in Dy3+/Sm3+ co-doped transparent oxyfluoride glass ceramics containing K3YF6 nanocrystals

This paper presents the preparation and characterization of transparent oxyfluoride glass ceramics (GCs) that contain nanocrystals of K3YF6 co-doped with Dy3+ and Sm3+. The study investigates the luminescence characteristics, the process of energy transfer (ET) and the behavior of the ratio-metric temperature sensing. The formation of well-defined nanocrystals of K3YF6 in the glass substrate was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). By varying Sm3+ concentration, a tunable emission ranging from pale yellow to orange-red was observed. Energy transfer from Dy3+ to Sm3+ ions was confirmed through fluorescence spectra and decay curves. Sample K3YF6, containing 0.5 mol%Dy3+/1.2 mol%Sm3+, showed an absolute sensitivity (Sa) of 0.635 % K−1 and relative sensitivity (Sr) of 0.401 % K−1. These findings underscore the promising applications of K3YF6: Dy3+, Sm3+ GCs in multicolor displays and high-performance temperature sensing devices.

Harvesting Multicolor Photoluminescence in Nonaromatic Interpenetrated Metal-Organic Framework Nanocrystals via Pressure-Modulated Carbonyls Aggregation.

Interpenetrated metal-organic frameworks (MOFs) with nonaromatic ligands provide a unique platform for adsorption, catalysis, and sensing applications. However, nonemission and the lack of optical property tailoring make it challenging to fabricate smart responsive devices with nonaromatic interpenetrated MOFs based on ligand-centered emission. In this paper, the pressure-induced aggregation effect is introduced in nonaromatic interpenetrated Zn4O(ADC)4(Et3N)6 (IRMOF-0) nanocrystals (NCs), where carbonyl groups aggregation results in O─O distances smaller than the sum of the van der Waals radii (3.04 Å), triggering the photoluminescence turn-on behavior. It is noteworthy that the IRMOF-0 NCs display an ultrabroad emission tunability of 130nm from deep blue (440nm) to yellow (570nm) upon release to ambient conditions at different pressures. The eventual retention of through-space n-π* interactions in different degrees via pressure treatment is primarily responsible for achieving a controllable multicolor emission behavior in initially nonemissive IRMOF-0 NCs. The fabricated multicolor phosphor-converted light-emitting diodes based on the pressure-treated IRMOF-0 NCs exhibit excellent thermal, chromaticity, and fatigue stability. The proposed strategy not only imparts new vitality to nonaromatic interpenetrated MOFs but also offers new perspectives for advancements in the field of multicolor displays and daylight illumination.

Boosting Near‐Infrared Emission in Spinel‐Type Phosphor via Oxygen Vacancy Engineering for Versatile Application

AbstractFe3+‐doped MgGa2O4 (MGO: Fe3+) spinel‐type near‐infrared (NIR) phosphor with non‐toxicity, outstanding thermal stability, and tunable emission has recently gained great concern owing to its wide applications. Nevertheless, the existence of detrimental O defects in the MgGa2O4 host and the forbidden d‐d transitions of Fe3+ lead to unsatisfactory luminescence efficiency, limiting the commercial application. In this study, a vacancy repairing engineering has been innovatively developed via F− substitution in MGO: Fe3+ (MGOF: Fe3+) for significantly enhancing NIR emission and maintaining outstanding thermal stability. Specifically, F− substitution with a similar radius effectively repairs the intrinsic O vacancy defects of MGO, thereby prohibiting the detrimental electron‐capturing effect. Meanwhile, F− incorporation can make the lattice of MGO distort and break the forbidden transition of Fe3+. Significantly, the obtained MGOF: Fe3+ presents a 16‐fold higher emission intensity than that of MGO: Fe3+. More important, the MGOF: Fe3+ can remain at 91.17% (363 K) and 85.10% (423 K). Finally, the NIR emission of MGOF: Fe3+ can be used for night vision, non‐destructive biological tissue detection, and food analysis. The proposed vacancy repairing strategy can certainly stimulate some new thoughts and concepts in designing high‐performance phosphors for wider applications.

Single-Photon Emission from Point Defects in Hexagonal Boron Nitride Induced by Plasma Treatment.

Solid-state quantum emitters are gaining significant attention for many quantum information applications. Hexagonal boron nitride (h-BN) is an emerging host material for generating bright, stable, and tunable single-photon emission with narrow line widths at room temperature. In this work, we present a facile and efficient approach to generate high-density single-photon emitters (SPEs) in mechanically exfoliated h-BN through H- or Ar-plasma treatment followed by high-temperature annealing in air. It is notable that the postannealing is essential to suppress the fluorescence background in photoluminescence spectra and enhance emitter stability. These quantum emitters exhibit excellent optical properties, including high purity, brightness, stability, polarization degree, monochromaticity, and saturation intensity. The effects of process parameters on the quality of quantum emitters were systematic investigated. We find that there exists an optimal plasma power and h-BN thickness to achieve a high SPE density. This work offers a practical avenue for generating SPEs in h-BN and holds promise for future research and applications in quantum photonics.

Actively tunable laser action in GeSn nanomechanical oscillators.

Mechanical forces induced by high-speed oscillations provide an elegant way to dynamically alter the fundamental properties of materials such as refractive index, absorption coefficient and gain dynamics. Although the precise control of mechanical oscillation has been well developed in the past decades, the notion of dynamic mechanical forces has not been harnessed for developing tunable lasers. Here we demonstrate actively tunable mid-infrared laser action in group-IV nanomechanical oscillators with a compact form factor. A suspended GeSn cantilever nanobeam on a Si substrate is resonantly driven by radio-frequency waves. Electrically controlled mechanical oscillation induces elastic strain that periodically varies with time in the GeSn nanobeam, enabling actively tunable lasing emission at >2 μm wavelengths. By utilizing mechanical resonances in the radio frequency as a driving mechanism, this work presents wide-range mid-infrared tunable lasers with ultralow tuning power consumption.

Tunable emission and improved sensitivity of optical thermometry in Ca2+/Sr2+ doped Ba2GdNbO6:Yb3+, Er3+ phosphors

Many efforts have been devoted to contactless optical thermometry because of their apparent advantages. The phosphors with double perovskite structure are considered good hosts for luminescence according to many related research. Herein, Yb3+/Er3+ co-doped Ba2GdNbO6 phosphors were successfully prepared and showed good up-conversion performance. Furthermore, the phosphors could achieve tunable luminescence by adjusting the calcination temperature or introducing proper Ca2+/Sr2+ ions. The intensity of green emissions increases with calcination temperature, while the red emissions increase by incorporating Ca2+/Sr2+ ions. The properties of optical thermometry based on the fluorescence intensity ratio (FIR) method of Er3+ at thermally coupled levels (2H11/2/4S3/2) were also explored in the range of 300–570 K. The maximum relative sensitivity (SR) of Yb3+/Er3+/Sr2+ tri-doped Ba2GdNbO6 sample reach 1.01 % K−1, which is higher than that of Yb3+/Er3+ co-doped Ba2GdNbO6 sample (0.78 % K−1). The research shows that the phosphors are prospective applications in temperature sensing.

Near-unity quantum yield and long-term emission stability in halide perovskite nanocrystal glass composite

Metal halide perovskites are promising optoelectronic materials due to their outstanding luminescent properties. However, the instability of perovskites has long been the bottleneck to their practical applications. Here Cs4PbBr6 nanocrystals based glass composite (Cs4PbBr6 NCs@glass) are successfully prepared, which displays green emission color (520 nm), narrow bandwidth (23 nm) and a near-unity photoluminescence quantum yield (PLQY). The H2O molecules permeating in the lattice of Cs4PbBr6 were found to be a crucial role in the subband energy emission. The Cs4PbBr6 NCs@glass has excellent emission stability; maintains 93 % of initial PL intensity after ultraviolet light irradiation for over 5000 h. In addition, by adjusting the halogen content, we have achieved tunable emission color from blue (450 nm) to green (520 nm) and red (670 nm) on Cs4PbX6 NCs@glass (X = Cl, Br, I), which covers up to 127 % of the National Television Systems Board (NTSC) standard system. Our finding indicates the commercial applications of perovskite materials in lighting and display.

Simultaneous improving luminescence intensity and stability of CsPbBr3:SCN−@Eu/Zr-Uio-66-NH2 with tunable emissions from blue to green and applications in indoor photovoltaics

Simultaneous improving luminescence intensity and stability of CsPbBr3:SCN−@Eu/Zr-Uio-66-NH2 with tunable emissions from blue to green and applications in indoor photovoltaics

Aggregation-Induced Modulation of Ground and Excited State Photophysics of 5-(tert-Butyl)-2-Hydroxy-1,3-Isophthalaldehyde (5-tBHI).

5-(tert-Butyl)-2-hydroxy-1,3-isophthalaldehyde (5-tBHI) is a photochromic material susceptible to either excited state proton transfer or excited state intramolecular proton transfer, depending upon the solvent. However, it has also been found to aggregate in the presence of sodium dodecyl sulfate. In this current study, based on the steady-state and time-resolved spectroscopy, supported by crystallography, quantum chemical density functional theory calculation, and molecular dynamics (MD) simulation, we report on the aggregation of this potential single benzene-based emitter (SBBE) in neat solvents as well as solid phase to modulate its photophysics. It has been found that 5-tBHI forms mixed aggregates of different orders, owing to the presence of both enolic and tautomeric forms, to yield tunable emission, although the emission intensity is quenched. These findings suggest that the intramolecular hydrogen bonding of 5-tBHI not only limits intermolecular interactions but also promotes nonradiative deactivation pathways. Hence, designing and structural engineering, with a focus to suppressing intramolecular hydrogen bonding as well as increasing through space conjugation by replacing the aldehydic moieties with bulky aliphatic or aromatic ketonic groups, can be a plausible approach to yielding improved probes with tunable emission and higher fluorescence quantum yields.

Stimulus-responsive room-temperature phosphorescence with tunable color for time-resolved advanced dynamic anti-counterfeiting

Multi-stimuli responsive multicolored room-temperature phosphorescent (RTP) carbon quantum dots (CQDs) have recently attracted considerable attention, owing to their potential applications in advanced dynamic anti-counterfeiting. The design and development of carbon dots that exhibit both stimulus response characteristics and multicolor RTP emission remains a significant challenge in the field. In this work, we present a novel approach to control the dynamic phosphorescence color and stimulus response properties of CQDs coated on paper by fine-tuning the surface functional groups of the CQDs. Specifically, histidine and 2,4,6-triaminopyrimidine was separately used to prepare N, O co-doped CQDs (NOCQDs) and N-doped CQDs (NCQDs), respectively. These CQDs were further coated on filter paper substrates to achieve water and heating cascade stimulus–response RTP. These stimuli-responsive properties of NOCQDs can be modulated by deprotonating their surface oxygen-containing groups. Eventually, we achieved time-resolved multicolor dynamic anti-counterfeiting by exploiting the stimuli-response properties and lifetimes differences between NOCQDs and NCQDs, realizing the 5D information encryption in all five stimulus-, pattern-, time-, and color-dependent codes. These findings highlight the potential of NOCQDs as advanced anti-counterfeiting materials and lay a foundation for further exploration into the synthesis and properties of CQDs with tunable stimuli-response features and RTP emission.